Panasonic Convertible Camera Aw E860 Operating Instructions
Have a look at the manual Panasonic Convertible Camera Aw E860 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 46
-46-
Menu item settingWAGC Maximum Gain Setting
[AGC Max Gain: 6dB, 12dB, 18dB, 24dB, N/Eye L,
N/Eye H]
This is used to set the maximum gain up when “Auto” has
been selected as the gain setting.
7Color Set DisplayXChroma Level Adjustment [Chroma Level: –3 to +3]
Chroma Level can be decreased or increased to three
levels. The signal output to the optional card cannot be
adjusted.
YWhite Balance Setting
[White Bal: ATW, AWC A, AWC B, 3200K, 5600K]
ATW:The white balance is automatically adjusted to
the...](http://img.usermanuals.tech/thumb/58/69558/w64_aw-e860_en_om_d-45.png "Page 46
-46-
Menu item settingWAGC Maximum Gain Setting
[AGC Max Gain: 6dB, 12dB, 18dB, 24dB, N/Eye L,
N/Eye H]
This is used to set the maximum gain up when “Auto” has
been selected as the gain setting.
7Color Set DisplayXChroma Level Adjustment [Chroma Level: –3 to +3]
Chroma Level can be decreased or increased to three
levels. The signal output to the optional card cannot be
adjusted.
YWhite Balance Setting
[White Bal: ATW, AWC A, AWC B, 3200K, 5600K]
ATW:The white balance is automatically adjusted to
the...")
![Page 47
-47-
ZATW Speed Setting
[ATW Speed: Slow 2, Slow 1, Mid, Fast 1, Fast 2]
ATW Speed can be set.
[Black Level Setting [Pedestal: –150 to +150]
The black level (pedestal) of the luminance (Y) signal can
be set. Used in adjusting the black levels of two or more
cameras.
\Painting Setting
[Painting: R Gain, B Gain, R Pedestal, B Pedestal:
–150 to +150]
R Gain, B Gain:
Fine adjustment of the white balance can be made
after AWC setting when AWC A or AWC B is
selected in White Balance Setting. In case of using...](http://img.usermanuals.tech/thumb/58/69558/w64_aw-e860_en_om_d-46.png "Page 47
-47-
ZATW Speed Setting
[ATW Speed: Slow 2, Slow 1, Mid, Fast 1, Fast 2]
ATW Speed can be set.
[Black Level Setting [Pedestal: –150 to +150]
The black level (pedestal) of the luminance (Y) signal can
be set. Used in adjusting the black levels of two or more
cameras.
\Painting Setting
[Painting: R Gain, B Gain, R Pedestal, B Pedestal:
–150 to +150]
R Gain, B Gain:
Fine adjustment of the white balance can be made
after AWC setting when AWC A or AWC B is
selected in White Balance Setting. In case of using...")
![Page 48
-48-
Menu item setting8G/L, Color Bar Set Display]Horizontal Phase Adjustment [H Phase: –206 to +49]
Horizontal phase can be adjusted when a genlock signal
is supplied.
^Subcarrier Phase Coarse Adjustment
[SC Coarse: 1, 2, 3, 4]
Coarse adjustment of subcarrier phase can be made
when a genlock signal is supplied.
_Subcarrier Phase Fine Adjustment
[SC Fine: –511 to +511]
Fine adjustment of subcarrier phase can be made when a
genlock signal is supplied.
`Color Bar Setup Setting
[Color Bar Set: 0.0 IRE, 7.5...](http://img.usermanuals.tech/thumb/58/69558/w64_aw-e860_en_om_d-47.png "Page 48
-48-
Menu item setting8G/L, Color Bar Set Display]Horizontal Phase Adjustment [H Phase: –206 to +49]
Horizontal phase can be adjusted when a genlock signal
is supplied.
^Subcarrier Phase Coarse Adjustment
[SC Coarse: 1, 2, 3, 4]
Coarse adjustment of subcarrier phase can be made
when a genlock signal is supplied.
_Subcarrier Phase Fine Adjustment
[SC Fine: –511 to +511]
Fine adjustment of subcarrier phase can be made when a
genlock signal is supplied.
`Color Bar Setup Setting
[Color Bar Set: 0.0 IRE, 7.5...")
![Page 49
-49-
hNoise Suppress Level Setting
[Noise Suppress: 1 to 10]
Screen noise can be reduced with the Detail Level
Setting at High or Low. If the noise suppress level is set
too high, a fine object will be reproduced less sharply.
iLevel Dependent Level Setting
[Level Dependent: 0% to 25%]
Screen noise due to the detail of dark parts of an object
can be reduced.
If level dependent level is set too high, however, hair, for
example, will be reproduced less sharply.
jDark Detail Level Setting [Dark Detail: 0 to...](http://img.usermanuals.tech/thumb/58/69558/w64_aw-e860_en_om_d-48.png "Page 49
-49-
hNoise Suppress Level Setting
[Noise Suppress: 1 to 10]
Screen noise can be reduced with the Detail Level
Setting at High or Low. If the noise suppress level is set
too high, a fine object will be reproduced less sharply.
iLevel Dependent Level Setting
[Level Dependent: 0% to 25%]
Screen noise due to the detail of dark parts of an object
can be reduced.
If level dependent level is set too high, however, hair, for
example, will be reproduced less sharply.
jDark Detail Level Setting [Dark Detail: 0 to...")
![Page 51
-51-
;Other Set DisplayoGamma Level Setting [Gamma: 0.35 to 0.55]
Gamma correction level can be set.
pKnee Level Setting
[Knee Point: 88% to 98%, Dynamic]
88% to 98%:The level of video signals subject to knee
(knee point) can be set.
Dynamic:Knee level is automatically adjusted
according to the scene.
qWhite Clip Level Setting [White Clip: 95% to 110%]
The peak level of video signals to be white-clipped can
be set.
rFlare Correction Level Setting [Flare R/G/B: 0 to 100]
Flare correction level can be...](http://img.usermanuals.tech/thumb/58/69558/w64_aw-e860_en_om_d-50.png "Page 51
-51-
;Other Set DisplayoGamma Level Setting [Gamma: 0.35 to 0.55]
Gamma correction level can be set.
pKnee Level Setting
[Knee Point: 88% to 98%, Dynamic]
88% to 98%:The level of video signals subject to knee
(knee point) can be set.
Dynamic:Knee level is automatically adjusted
according to the scene.
qWhite Clip Level Setting [White Clip: 95% to 110%]
The peak level of video signals to be white-clipped can
be set.
rFlare Correction Level Setting [Flare R/G/B: 0 to 100]
Flare correction level can be...")
![Page 53
-53-
$Setting to initial setIn case of the wrong setting in any use mode, take the
following steps to return to the initial settings.
(1) Select [Initialize Data] on the main menu screen of each
Use Mode. (See page 29.)
Press the YES/ABC switch, then [Initialize Data] screen
shown for about 10 seconds.
(2) Press the YES/ABC switch within about 10 seconds to
return to the initial settings, the existing settings are
initialized, the screen shown at 2, and the camera
returns to main menu.(3) If the NO/BAR...](http://img.usermanuals.tech/thumb/58/69558/w64_aw-e860_en_om_d-52.png "Page 53
-53-
$Setting to initial setIn case of the wrong setting in any use mode, take the
following steps to return to the initial settings.
(1) Select [Initialize Data] on the main menu screen of each
Use Mode. (See page 29.)
Press the YES/ABC switch, then [Initialize Data] screen
shown for about 10 seconds.
(2) Press the YES/ABC switch within about 10 seconds to
return to the initial settings, the existing settings are
initialized, the screen shown at 2, and the camera
returns to main menu.(3) If the NO/BAR...")
-51- ;Other Set DisplayoGamma Level Setting [Gamma: 0.35 to 0.55] Gamma correction level can be set. pKnee Level Setting [Knee Point: 88% to 98%, Dynamic] 88% to 98%:The level of video signals subject to knee (knee point) can be set. Dynamic:Knee level is automatically adjusted according to the scene. qWhite Clip Level Setting [White Clip: 95% to 110%] The peak level of video signals to be white-clipped can be set. rFlare Correction Level Setting [Flare R/G/B: 0 to 100] Flare correction level can be adjusted. sBlack Stretch Setting [Black Stretch: ON, OFF] Black stretch to correct the suppression of black portions at low luminance can be set to ON or OFF. tClean DNR Setting [Clean DNR: OFF, Low, High] This enables the clean DNR effect to be selected. uCCD Read Out Mode Setting [Field/Frame: Field, Frame 1, Frame 2] Field:CCD storage will be by field storage. Frame 1:Vertical resolution increases in frame storage. Frame 2:Vertical resolution is raised without increasing residual images by frame storage and electronic shutter.vPC Control Access Speed Setting [Baud Rate: 1200bps, 2400bps, 4800bps, 9600bps] This setting is to select a communication speed in controlling the camera from the computer. wComponent Output Setting [Component: RGB, Y/Pr/Pb, Y/C] This enables RGB, Y/Pr/Pb or Y/C to be selected as the component signals which are to be output from the I/F REMOTE connector. xAspect Ratio Selection [Aspect Ratio: 16:9, 4:3] Aspect ratio can be selected from 16:9 or 4:3. yFan Setting [Fan SW: OFF, Auto] OFF:Select this setting to stop the fan when its operating sound is found to be bothersome in a studio or other such environment. Auto:The temperature is detected automatically, and the fan starts operating when the temperature exceeds approx. 95°F (35°C). Under normal circumstances, the “Auto” setting is used. zLanguage Selection [Language: English, Japanese] English:Menu screen is displayed in English. Japanese:Menu screen is displayed in Japanese.
-53- $Setting to initial setIn case of the wrong setting in any use mode, take the following steps to return to the initial settings. (1) Select [Initialize Data] on the main menu screen of each Use Mode. (See page 29.) Press the YES/ABC switch, then [Initialize Data] screen shown for about 10 seconds. (2) Press the YES/ABC switch within about 10 seconds to return to the initial settings, the existing settings are initialized, the screen shown at 2, and the camera returns to main menu.(3) If the NO/BAR switch is pressed, or if the YES/ABC switch is not pressed, within about 10 seconds, the screen shown at 3, and the camera returns to main menu, and the existing settings are not initialized.Setting to initial set Note If you are using an option card, the Option Card Setting Submenu will not be initialized even if “Return to Initialize” is performed. 123
-54- $Initial settings of the setting items (Factory preset values)UHalogen, Fluorescent, Outdoor Mode Picture Level ±0 ±0 ±0 Light PEAK/AVG 0 0 0 Light Area Top cut Top cut Top cut Brightness Auto ND (ELC) OFF OFF ON Set Auto Gain Up OFF OFF ON AGC Max Gain ––– ––– N/Eye H Manu Gain Up 0dB 0dB –––Pedestal ±0 ±0 –40 Chroma Level ±0 +0 +0 Color SetFlesh Tone ±0 ±0 ±0 White Bal AWC A AWC A ATWATW Speed ––– ––– Mid H Phase ±0 ±0 ±0 G/L, ColorSC Coarse 1 1 1 Bar SetSC Fine ±0 ±0 ±0 Color Bar Set 7.5 IRE 7.5 IRE 7.5 IREColor Bar Set 2 0.0 IRE 0.0 IRE 0.0 IRE DTL Select Sharpness Sharpness Sharpness SharpnessLevel High High High (DTL) SetNoise Suppress OFF OFF OFF Clean DNR OFF OFF OFFFlesh Noise Sup. OFF OFF OFF Contrast (Gamma) Mid Mid Mid Shutter Speed OFF OFF Auto ND Synchro Scan ––– ––– ––– V Resolution Normal Normal Normal Other Set Baud Rate 9600bps 9600bps 9600bps Component Y/Pr/Pb Y/Pr/Pb Y/Pr/Pb Aspect Ratio 16:9 16:9 16:9 Fan SW Auto Auto Auto Language (English) (English) (English) Item Halogen mode Fluorescent mode Outdoor mode Note When the optional card is inserted to the camera, “Language” menu will not be returned to default setting even if “Initialize Data” menu is executed.
-55- UUser Mode Picture Level ±0 Light PEAK/AVG 0 Light Area Top cut Iris,Shutter, Auto Iris Adjust OFF Gain Set Shutter Mode Step Step/Synchro OFF Gain 0dBAGC Max Gain ––– Chroma Level +2 White Bal AWC A ATW Speed ––– Color SetPedestal ±0 Painting R Gain ±0 B Gain ±0 R Pedestal ±0 B Pedestal ±0 H Phase ±0 G/L, ColorSC Coarse 1 Bar SetSC Fine ±0 Color Bar Set 7.5 IRE Color Bar Set2 0.0 IREItem User mode Detail High H Detail Level H 20 V Detail Level H 19 H Detail Level L 13 Detail Set 1 V Detail Level L 8 Detail Band 5 Noise Suppress 3 Level Dependent 0%Dark Detail 0 Chroma Detail 0 Detail Set 2 Flesh Noise Suppress OFF Precision Detail OFF Item User mode
-56- B_Mg Gain ±0 B_Mg Phase ±0 Mg Gain +27 Mg Phase ±0 Mg_R Gain ±0 Mg_R Phase ±0 R Gain +15 R Phase ±0 R_Yl Gain ±0 R_Yl Phase ±0 Yl Gain +18 Color Yl Phase +6 Matrix Set Yl_G Gain ±0 Yl_G Phase ±0 G Gain +30 G Phase +112 G_Cy Gain ±0 G_Cy Phase ±0 Cy Gain +44 Cy Phase –15 Cy_B Gain ±0 Cy_B Phase ±0 B Gain –20 B Phase +36 Item User mode Gamma 0.45 Knee Point 88% White Clip 110% Other Set 1Flare R 0 Flare G 0 Flare B 0 Black Stretch OFFClean DNR OFF Field/Frame Field Baud Rate 9600bps Other Set 2Component Y/Pr/Pb Aspect Ratio 16:9 Fan SW Auto Language (English) Item User mode Setting to initial set Note When the optional card is inserted to the camera, “Language” menu will not be returned to default setting even if “Initialize Data” menu is executed.
-57- Appearance 3-5/16 (84)6-11/16 (170) 15/32 (12) 25/64 (10) 3-1/32 (77)23/32 (18) Unit: inch (mm)
-58- SpecificationsSource voltage:DC 12V Power consumption:15.4 W 1indicates safety information. Optical system:2/3” Prism optical system, F1.4 Pickup device:2/3” interline wide CCD Number of valid pixels:948 (H)!485 (V) (About 460000 pixels) Total number of pixels:1020 (H)!505 (V) (About 510000 pixels) Scanning system:525 lines, 60 fields, 30 flames Synchronization system:Internal synchronization: EIA standard External synchronization: BBS or VBS (BNC!1, Dsub 50 P!1) Video output:Composite: 1.0 Vp-p/75Ω(BNC!1, Dsub 50 P!1) Y/C Y: 1.0 Vp-p/75Ω; C: 0.286 Vp-p/75Ω(burst) (Dsub 50 P!1) Y/Pr/Pb Y: 1.0 Vp-p/75Ω; Pr, Pb: 0.7 Vp-p/75Ω(Dsub 50 P!1) RGB G: 1.0 Vp-p/75Ω; RB: 0.7 Vp-p/75Ω(Dsub 50 P!1) Standard illumination color temperature: 2,000 lx (F11, 3200K) Minimum illumination:0.4 lx (F1.7, Night Eye H) S/N ratio:65 dB (Y signal, DTL OFF, gamma OFF, DNR ON) Horizontal resolution:850 TV lines (high band DTL ON, center area) Registration:0.05 % (Entire screen, excluding effects of lens) Geometric distortion:0% Aspect ratio conversion:16 : 9, 4 : 3 Contour correction:Horizontal, vertical (2H) White balance:AWC A, AWC B (R/B gain, painting), ATW, 3200K, 5600K preset Black balance:Auto (R/B pedestal, painting function)
-59- Chroma amount variability :7 levels variability Encoding system:Y, R-Y, B-Y Gain selection:0 to 30 dB in step, AGC, Night Eye L/H Electronic shutter speed:1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000, ELC, Synchro scan (60.34 Hz to 15.75 kHz) CCD readout selection:Field, Flame 1, Flame 2 Color bars:SMPTE Lens mount:2/3” bayonet mount Lens diaphragm:Auto, Manual (only with remote control), Adjust ON, OFF Selectors:MENU (A) ITEM/AWC (S) (AWC: when menu screen is not displayed) YES/ABC (+) (ABC: when menu screen is not displayed) NO/BAR (–) (BAR: when menu screen is not displayed) Input/Output connectors:VIDEO OUT: BNC connector G/L IN: BNC connector IRIS: 12 P round connector DC 12 V IN: DC connector I/F REMOTE: 50 P Dsub connector Indicator:Red LED lits: POWER ON Allowable temperature ranges: For storage: –4°F to 140°F (–20°C to +60°C) For guranteeing performance: 41°F to 95°F (+5°C to +35°C) For guranteeing operation: 14°F to 113°F (–10°C to +45°C) Allowable humidity ranges: For storage: 20% to 90%, for operation: 20% to 90% Dimensions (W!H!D):3-5/16”!3-3/4”!7-9/16” (84!95!192 mm) Weight:2.5 lbs (1.15 kg) Weight and dimensions indicated are approximate. Specifications are subject to change without notice.
-60- Standard accessoriesRubber sheet ...................................................................... 1 Mounting adapter ................................................................ 1Screw .................................................................................. 2 Mounting spacer .................................................................. 1