Panasonic Convertible Camera Aw E860 Operating Instructions
Here you can view all the pages of manual Panasonic Convertible Camera Aw E860 Operating Instructions. The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
-41-
6Iris, Shutter, Gain Set DisplayP
–––––
Q
–––––
R
–––––
S
–––––
T
–––––
U
–––––
V
–––––
W
––––––7Color Set DisplayX
–––––
Y
–––––
Z
––––––
[
–––––
\
–––––
8G/L, Color Bar Set Display]
–––––
^
–––––
_
–––––
`
–––––
a
––––
9Detail Set Displayb
–––––
c
–––––
d
–––––
e
–––––
f
–––––
g
–––––
h
–––––
i
–––––
j
–––––k
–––––
l
–––––
m
–––––
$Sub menu (User Mode)](http://img.usermanuals.tech/thumb/58/69558/w300_aw-e860_en_om_d-40.png "Page 41
-41-
6Iris, Shutter, Gain Set DisplayP
–––––
Q
–––––
R
–––––
S
–––––
T
–––––
U
–––––
V
–––––
W
––––––7Color Set DisplayX
–––––
Y
–––––
Z
––––––
[
–––––
\
–––––
8G/L, Color Bar Set Display]
–––––
^
–––––
_
–––––
`
–––––
a
––––
9Detail Set Displayb
–––––
c
–––––
d
–––––
e
–––––
f
–––––
g
–––––
h
–––––
i
–––––
j
–––––k
–––––
l
–––––
m
–––––
$Sub menu (User Mode)")
-41- 6Iris, Shutter, Gain Set DisplayP ––––– Q ––––– R ––––– S ––––– T ––––– U ––––– V ––––– W ––––––7Color Set DisplayX ––––– Y ––––– Z –––––– [ ––––– \ ––––– 8G/L, Color Bar Set Display] ––––– ^ ––––– _ ––––– ` ––––– a –––– 9Detail Set Displayb ––––– c ––––– d ––––– e ––––– f ––––– g ––––– h ––––– i ––––– j –––––k ––––– l ––––– m ––––– $Sub menu (User Mode)
Page 42
![Page 42
-42-
Menu item settingn
–––––n
–––––
––––
––––:Color Matrix Set Display
;Other Set Displayo
–––––
p
–––––
q
–––––
–
r
––––
–
s
–––––
t
–––––u
–––––
v
–––––
w
–––––
x
–––––
y
–––––
z
–––––
• Settings enclosed in parentheses can be set with the RCU (RCB) switch or VR in RCU (RCB) mode.
• Settings enclosed in [ ] is displayed when the optional card to process video signals (SDI card, etc.) is inserted.
• To return to the initial settings, refer to page 53.](http://img.usermanuals.tech/thumb/58/69558/w300_aw-e860_en_om_d-41.png "Page 42
-42-
Menu item settingn
–––––n
–––––
––––
––––:Color Matrix Set Display
;Other Set Displayo
–––––
p
–––––
q
–––––
–
r
––––
–
s
–––––
t
–––––u
–––––
v
–––––
w
–––––
x
–––––
y
–––––
z
–––––
• Settings enclosed in parentheses can be set with the RCU (RCB) switch or VR in RCU (RCB) mode.
• Settings enclosed in [ ] is displayed when the optional card to process video signals (SDI card, etc.) is inserted.
• To return to the initial settings, refer to page 53.")
-42- Menu item settingn –––––n ––––– –––– ––––:Color Matrix Set Display ;Other Set Displayo ––––– p ––––– q ––––– – r –––– – s ––––– t –––––u ––––– v ––––– w ––––– x ––––– y ––––– z ––––– • Settings enclosed in parentheses can be set with the RCU (RCB) switch or VR in RCU (RCB) mode. • Settings enclosed in [ ] is displayed when the optional card to process video signals (SDI card, etc.) is inserted. • To return to the initial settings, refer to page 53.
Page 43
![Page 43
-43-
$Setting and changing of the setting
items (User Mode)6Iris, Shutter, Gain Set DisplayPVideo Level Adjustment [Picture Level: –50 to +50]
Convergence level of AUTO IRIS, AUTO GAINUP, ELC
can be adjusted.
QDetecting Ratio Adjustment
[Light PEAK/AVG: P50 to A50]
The ratio of AUTO IRIS, AUTO GAINUP, ELC detected
peak to average can be adjusted within a range.
RPhotometric Measurement Method Setting
[Light Area: All, Center, Top cut, BTM cut, R/L cut]
A photometric measurement method can be selected...](http://img.usermanuals.tech/thumb/58/69558/w300_aw-e860_en_om_d-42.png "Page 43
-43-
$Setting and changing of the setting
items (User Mode)6Iris, Shutter, Gain Set DisplayPVideo Level Adjustment [Picture Level: –50 to +50]
Convergence level of AUTO IRIS, AUTO GAINUP, ELC
can be adjusted.
QDetecting Ratio Adjustment
[Light PEAK/AVG: P50 to A50]
The ratio of AUTO IRIS, AUTO GAINUP, ELC detected
peak to average can be adjusted within a range.
RPhotometric Measurement Method Setting
[Light Area: All, Center, Top cut, BTM cut, R/L cut]
A photometric measurement method can be selected...")
-43- $Setting and changing of the setting items (User Mode)6Iris, Shutter, Gain Set DisplayPVideo Level Adjustment [Picture Level: –50 to +50] Convergence level of AUTO IRIS, AUTO GAINUP, ELC can be adjusted. QDetecting Ratio Adjustment [Light PEAK/AVG: P50 to A50] The ratio of AUTO IRIS, AUTO GAINUP, ELC detected peak to average can be adjusted within a range. RPhotometric Measurement Method Setting [Light Area: All, Center, Top cut, BTM cut, R/L cut] A photometric measurement method can be selected...
Page 44
![Page 44
-44-
Menu item settingTElectronic Shutter Mode Setting
[Shutter Mode: Step, S/Scan, ELC]
Step:Electronic shutter operates at the speed selected
by the Electronic Shutter Step/Synchro Scan
Setting.
S/Scan (Synchro Scan):
Electronic shutter operates at the speed selected
in Electronic Shutter Step/Synchro Scan Setting.
ELC:Electronic shutter is controlled to automatically
adjust the luminance.
UElectronic Shutter Step/Synchro Scan Setting
[Step/Synchro: OFF, 1/100 to 1/10000 (Step),
60.34 Hz to 15.75kHz...](http://img.usermanuals.tech/thumb/58/69558/w300_aw-e860_en_om_d-43.png "Page 44
-44-
Menu item settingTElectronic Shutter Mode Setting
[Shutter Mode: Step, S/Scan, ELC]
Step:Electronic shutter operates at the speed selected
by the Electronic Shutter Step/Synchro Scan
Setting.
S/Scan (Synchro Scan):
Electronic shutter operates at the speed selected
in Electronic Shutter Step/Synchro Scan Setting.
ELC:Electronic shutter is controlled to automatically
adjust the luminance.
UElectronic Shutter Step/Synchro Scan Setting
[Step/Synchro: OFF, 1/100 to 1/10000 (Step),
60.34 Hz to 15.75kHz...")
-44- Menu item settingTElectronic Shutter Mode Setting [Shutter Mode: Step, S/Scan, ELC] Step:Electronic shutter operates at the speed selected by the Electronic Shutter Step/Synchro Scan Setting. S/Scan (Synchro Scan): Electronic shutter operates at the speed selected in Electronic Shutter Step/Synchro Scan Setting. ELC:Electronic shutter is controlled to automatically adjust the luminance. UElectronic Shutter Step/Synchro Scan Setting [Step/Synchro: OFF, 1/100 to 1/10000 (Step), 60.34 Hz to 15.75kHz...
Page 45
![Page 45
-45-
VGain Setting
[Gain: Auto, 0 dB to 30 dB, N/Eye L, N/Eye H]
Auto:The light quantity is adjusted
automatically.
0 dB:0 dB should be selected in normal cases.
1 dB to 30 dB:Use this range if sufficient video output
cannot be obtained even when the lens
iris is opened in shooting dark scenes.
N/Eye L (Night Eye L):
Use this mode if sufficient video output
cannot be obtained even if 30 dB gain up
should be selected.
N/Eye H (Night Eye H):
Use this setting if it is not possible to
achieve a satisfactory...](http://img.usermanuals.tech/thumb/58/69558/w300_aw-e860_en_om_d-44.png "Page 45
-45-
VGain Setting
[Gain: Auto, 0 dB to 30 dB, N/Eye L, N/Eye H]
Auto:The light quantity is adjusted
automatically.
0 dB:0 dB should be selected in normal cases.
1 dB to 30 dB:Use this range if sufficient video output
cannot be obtained even when the lens
iris is opened in shooting dark scenes.
N/Eye L (Night Eye L):
Use this mode if sufficient video output
cannot be obtained even if 30 dB gain up
should be selected.
N/Eye H (Night Eye H):
Use this setting if it is not possible to
achieve a satisfactory...")
-45- VGain Setting [Gain: Auto, 0 dB to 30 dB, N/Eye L, N/Eye H] Auto:The light quantity is adjusted automatically. 0 dB:0 dB should be selected in normal cases. 1 dB to 30 dB:Use this range if sufficient video output cannot be obtained even when the lens iris is opened in shooting dark scenes. N/Eye L (Night Eye L): Use this mode if sufficient video output cannot be obtained even if 30 dB gain up should be selected. N/Eye H (Night Eye H): Use this setting if it is not possible to achieve a satisfactory...
Page 46
![Page 46
-46-
Menu item settingWAGC Maximum Gain Setting
[AGC Max Gain: 6dB, 12dB, 18dB, 24dB, N/Eye L,
N/Eye H]
This is used to set the maximum gain up when “Auto” has
been selected as the gain setting.
7Color Set DisplayXChroma Level Adjustment [Chroma Level: –3 to +3]
Chroma Level can be decreased or increased to three
levels. The signal output to the optional card cannot be
adjusted.
YWhite Balance Setting
[White Bal: ATW, AWC A, AWC B, 3200K, 5600K]
ATW:The white balance is automatically adjusted to
the...](http://img.usermanuals.tech/thumb/58/69558/w300_aw-e860_en_om_d-45.png "Page 46
-46-
Menu item settingWAGC Maximum Gain Setting
[AGC Max Gain: 6dB, 12dB, 18dB, 24dB, N/Eye L,
N/Eye H]
This is used to set the maximum gain up when “Auto” has
been selected as the gain setting.
7Color Set DisplayXChroma Level Adjustment [Chroma Level: –3 to +3]
Chroma Level can be decreased or increased to three
levels. The signal output to the optional card cannot be
adjusted.
YWhite Balance Setting
[White Bal: ATW, AWC A, AWC B, 3200K, 5600K]
ATW:The white balance is automatically adjusted to
the...")
-46- Menu item settingWAGC Maximum Gain Setting [AGC Max Gain: 6dB, 12dB, 18dB, 24dB, N/Eye L, N/Eye H] This is used to set the maximum gain up when “Auto” has been selected as the gain setting. 7Color Set DisplayXChroma Level Adjustment [Chroma Level: –3 to +3] Chroma Level can be decreased or increased to three levels. The signal output to the optional card cannot be adjusted. YWhite Balance Setting [White Bal: ATW, AWC A, AWC B, 3200K, 5600K] ATW:The white balance is automatically adjusted to the...
Page 47
![Page 47
-47-
ZATW Speed Setting
[ATW Speed: Slow 2, Slow 1, Mid, Fast 1, Fast 2]
ATW Speed can be set.
[Black Level Setting [Pedestal: –150 to +150]
The black level (pedestal) of the luminance (Y) signal can
be set. Used in adjusting the black levels of two or more
cameras.
\Painting Setting
[Painting: R Gain, B Gain, R Pedestal, B Pedestal:
–150 to +150]
R Gain, B Gain:
Fine adjustment of the white balance can be made
after AWC setting when AWC A or AWC B is
selected in White Balance Setting. In case of using...](http://img.usermanuals.tech/thumb/58/69558/w300_aw-e860_en_om_d-46.png "Page 47
-47-
ZATW Speed Setting
[ATW Speed: Slow 2, Slow 1, Mid, Fast 1, Fast 2]
ATW Speed can be set.
[Black Level Setting [Pedestal: –150 to +150]
The black level (pedestal) of the luminance (Y) signal can
be set. Used in adjusting the black levels of two or more
cameras.
\Painting Setting
[Painting: R Gain, B Gain, R Pedestal, B Pedestal:
–150 to +150]
R Gain, B Gain:
Fine adjustment of the white balance can be made
after AWC setting when AWC A or AWC B is
selected in White Balance Setting. In case of using...")
-47- ZATW Speed Setting [ATW Speed: Slow 2, Slow 1, Mid, Fast 1, Fast 2] ATW Speed can be set. [Black Level Setting [Pedestal: –150 to +150] The black level (pedestal) of the luminance (Y) signal can be set. Used in adjusting the black levels of two or more cameras. \Painting Setting [Painting: R Gain, B Gain, R Pedestal, B Pedestal: –150 to +150] R Gain, B Gain: Fine adjustment of the white balance can be made after AWC setting when AWC A or AWC B is selected in White Balance Setting. In case of using...
Page 48
![Page 48
-48-
Menu item setting8G/L, Color Bar Set Display]Horizontal Phase Adjustment [H Phase: –206 to +49]
Horizontal phase can be adjusted when a genlock signal
is supplied.
^Subcarrier Phase Coarse Adjustment
[SC Coarse: 1, 2, 3, 4]
Coarse adjustment of subcarrier phase can be made
when a genlock signal is supplied.
_Subcarrier Phase Fine Adjustment
[SC Fine: –511 to +511]
Fine adjustment of subcarrier phase can be made when a
genlock signal is supplied.
`Color Bar Setup Setting
[Color Bar Set: 0.0 IRE, 7.5...](http://img.usermanuals.tech/thumb/58/69558/w300_aw-e860_en_om_d-47.png "Page 48
-48-
Menu item setting8G/L, Color Bar Set Display]Horizontal Phase Adjustment [H Phase: –206 to +49]
Horizontal phase can be adjusted when a genlock signal
is supplied.
^Subcarrier Phase Coarse Adjustment
[SC Coarse: 1, 2, 3, 4]
Coarse adjustment of subcarrier phase can be made
when a genlock signal is supplied.
_Subcarrier Phase Fine Adjustment
[SC Fine: –511 to +511]
Fine adjustment of subcarrier phase can be made when a
genlock signal is supplied.
`Color Bar Setup Setting
[Color Bar Set: 0.0 IRE, 7.5...")
-48- Menu item setting8G/L, Color Bar Set Display]Horizontal Phase Adjustment [H Phase: –206 to +49] Horizontal phase can be adjusted when a genlock signal is supplied. ^Subcarrier Phase Coarse Adjustment [SC Coarse: 1, 2, 3, 4] Coarse adjustment of subcarrier phase can be made when a genlock signal is supplied. _Subcarrier Phase Fine Adjustment [SC Fine: –511 to +511] Fine adjustment of subcarrier phase can be made when a genlock signal is supplied. `Color Bar Setup Setting [Color Bar Set: 0.0 IRE, 7.5...
Page 49
![Page 49
-49-
hNoise Suppress Level Setting
[Noise Suppress: 1 to 10]
Screen noise can be reduced with the Detail Level
Setting at High or Low. If the noise suppress level is set
too high, a fine object will be reproduced less sharply.
iLevel Dependent Level Setting
[Level Dependent: 0% to 25%]
Screen noise due to the detail of dark parts of an object
can be reduced.
If level dependent level is set too high, however, hair, for
example, will be reproduced less sharply.
jDark Detail Level Setting [Dark Detail: 0 to...](http://img.usermanuals.tech/thumb/58/69558/w300_aw-e860_en_om_d-48.png "Page 49
-49-
hNoise Suppress Level Setting
[Noise Suppress: 1 to 10]
Screen noise can be reduced with the Detail Level
Setting at High or Low. If the noise suppress level is set
too high, a fine object will be reproduced less sharply.
iLevel Dependent Level Setting
[Level Dependent: 0% to 25%]
Screen noise due to the detail of dark parts of an object
can be reduced.
If level dependent level is set too high, however, hair, for
example, will be reproduced less sharply.
jDark Detail Level Setting [Dark Detail: 0 to...")
-49- hNoise Suppress Level Setting [Noise Suppress: 1 to 10] Screen noise can be reduced with the Detail Level Setting at High or Low. If the noise suppress level is set too high, a fine object will be reproduced less sharply. iLevel Dependent Level Setting [Level Dependent: 0% to 25%] Screen noise due to the detail of dark parts of an object can be reduced. If level dependent level is set too high, however, hair, for example, will be reproduced less sharply. jDark Detail Level Setting [Dark Detail: 0 to...
Page 50
-50- Menu item setting:Color Matrix Set DisplaynB_Mg Gain:Increases or decreases the intermediate color between blue and magenta. B_Mg Phase:Varies the hue of the intermediate color between blue and magenta. Mg Gain:Increases or decreases the magenta. Mg Phase:Varies the hue of the magenta. Mg_R Gain:Increases or decreases the intermediate color between magenta and red. Mg_R Phase:Varies the hue of the intermediate color between magenta and red. R Gain:Increases or decreases the red. R Phase:Varies the...