Panasonic Convertible Camera Aw E750 Operating Instructions

-41-
5. PC Control Access Speed Setting 
[Baud Rate: 1 200bps, 2 400bps, 4 800bps, 9 600bps]
Select a communication speed in controlling the
camera from the computer.
6. 
Component Output Setting 
[Component: RGB, Y/Pr/Pb, Y/C]
This enables RGB, Y/Pr/Pb or Y/C to be selected as
the component signals which are to be output from
the I/F REMOTE connector.
7. Digital Extender Setting 
[Digital Extender: OFF, ON]
OFF:Under normal circumstances, this setting is
used.
ON:An extender effect which is...

-42-
Sub Menu (User Mode)
**Iris,Shutter,Gain Set**
 Picture Level         ±0
 Light PEAK/AVG        ±0
 Light Area       Top Cut
 Auto Iris Adjust     OFF
 Shutter Mode      (Step)
  Step/Synchro      (OFF)
 Gain               (0dB)
 Digital Gain Up      0dB
  AGC Max Gain      (---)
 Charge Time          OFF
Return
**Color Set**
 Chroma Level          ±0
 White Bal        (AWC A)
  ATW Speed           Mid
 Pedestal            (±0)
 Painting
  R Gain             (±0)
  B Gain             (±0)
  R...

-43-
**Color Matrix Set 1**
 B_Mg Gain             ±0
 B_Mg Phase            ±0
 Mg   Gain             ±0
 Mg   Phase            ±0
 Mg_R Gain             ±0
 Mg_R Phase            ±0
 R    Gain             ±0
 R    Phase            ±0
**Color Matrix Set 2**
 R_Yl Gain             ±0
 R_Yl Phase            ±0
 Yl   Gain             ±0
 Yl   Phase            ±0
 Yl_G Gain             ±0
 Yl_G Phase            ±0
 G    Gain             ±0
 G    Phase            ±0
**Color Matrix Set 3**
 G_Cy Gain...

-44-
4. Auto Iris Level Fine Adjustment 
[Auto Iris Adjust: ON, OFF]
ON:Fine adjustment of auto iris convergence level
can be made with the iris control when the iris
switch on the RCU (RCB) or on the hybrid control
panel is in the AUTO position.
OFF:The iris control is invalid when the iris switch on
the RCU (RCB) or on the hybrid control panel is
in the AUTO position.
Setting and Changing of the
Setting Items (User Mode)
6 Iris, Shutter, Gain Set Display
1. Video Level Adjustment [Picture Level: –50...

-45-
5. Electronic Shutter Mode Setting 
[Shutter Mode: Step, ELC, S/Scan]
Step:Electronic shutter operates at the speed
selected by the Electronic Shutter Step/Synchro
Scan Setting (6-6).
ELC:Electronic shutter is controlled to automatically
adjust the luminance.
S/Scan (Synchro Scan):Electronic shutter operates
at the speed selected in Electronic Shutter
Step/Synchro Scan Setting (6-6).
6. Electronic Shutter Step/Synchro Scan Setting
[Step/Synchro: OFF, 1/100 to 1/10 000 (step), 
60.34Hz to 15.75kHz...

-46-
7. Gain Setting 
[Gain: Auto, 0 dB to 30 dB, N/Eye L, N/Eye H]
(models AW-E750, AW-E655, AW-E650) 
[Gain: Auto 0 dB to 30 dB, N/Eye] 
(model AW-E350)
When “Auto” has been selected as the CCD storage
time setting (6-10), the setting is kept to “Auto”
regardless of the gain setting selected here.
Auto:The light quantity is adjusted automatically.
0 dB:Under normal circumstances, this setting is
used.
1 dB to 30 dB:Use this setting while shooting dark
scenes if it is not possible to achieve a...

-47-
8. Digital Gain Up Setting 
[Digital Gain Up: 0dB, 6dB, 12dB, 18dB, 24dB, 30dB]
This can be set when a setting other than “Auto” has
been selected as the gain setting (6-7).
0 dB:Under normal circumstances, this setting is
used.
6 dB to 30 dB:Use this setting while shooting dark
scenes if it is not possible to achieve a satisfacto-
ry video output even when the lens diaphragm is
opened and “Night Eye” is selected as the gain
setting (6-7).
9. AGC Maximum Gain Setting 
[AGC Max Gain: 6dB, 12dB, 18dB,...

-48-
7Color Set Display
1. Chroma Level Adjustment [Chroma Level: –3 to +3]
Chroma Level can be decreased or increased to
three levels.
2. White Balance Setting 
[White Bal: ATW, AWC A, AWC B, P SET 3 200K, 
P SET 5 600K]
ATW:The white balance is automatically adjusted
to the optimum position.
AWC A, AWC B:Color temperature conditions at
two points can be stored at AWC A and AWC B.
Once the white balance is adjusted with the
ITEM/AWC switch on the back of the camera, it
is no longer necessary to set the...

-49-
6. Negative/Positive Selection 
[Nega/Posi: Posi, Nega]
Posi:Normal image
Nega:Image is shown reversed in darkness and
color.
8G/L Adjustment Set Display
1. Horizontal Phase Adjustment 
[H Phase: –206 to +49]
Horizontal phase can be adjusted when a genlock
signal is supplied.
2. Subcarrier Phase Coarse Adjustment 
[SC Coarse: 1, 2, 3, 4]
Coarse adjustment of subcarrier phase can be made
when a genlock signal is supplied.
3. Subcarrier Phase Fine Adjustment 
[SC Fine: –511 to +511]
Fine adjustment of...

-50-
7. Noise Suppress Compensation Level Setting
[Noise Suppress: 1 to 10]
Screen noise can be reduced with the Detail Level
Setting (9-1) at HIGH or LOW. If the noise suppress
compensation level is set too high, a fine object will
be reproduced less sharply.
8. Level Dependent Compensation Level Setting
[Level Dependent: 0% to 25%]
Screen noise due to the detail of dark parts of an
object can be reduced.
If level dependent compensation level is set too high,
however, hair, for example, will be...