Panasonic Convertible Camera Aw E750 Operating Instructions

-31-
MENU ITEM SETTING
MENU ITEM SETTING
•Each of the four use modes of the camera has a
main menu. (Shown at right)
•Each item of the main menu has a submenu, which
consists of several settings.
•These settings have been preset to the optimum 
values to suit each use mode, and can be changed
to suit actual shooting conditions.
•They can be set from the camera and RCU (RCB).
They can also be set from the hybrid control panel
using the switches, but the setting items are limited
because the menu is not...

-32-
SETTING
1. From the camera alone:
Keep the MENU switch depressed for 5 sec-
onds or more.
From RCU (RCB):
Set the user set switch in the pocket to the ON
position.
The main menu appears on the monitor screen.
2. Each time the MENU switch (
A), ITEM/AWC switch 
(
S), or NO/BAR switch (−) is pressed, the blinking
item moves up or down.
3. When the YES/ABC switch is pressed after select-
ing the desired item to blink, the submenu for the
selected item appears on the screen.
4. Select the desired item...

-33-
•Settings enclosed in parentheses can be set with the RCU (RCB) switch or VR in RCU (RCB) mode.
•To return to the initial settings, refer to page 56.
SUB MENU (Halogen Mode, Fluorescent Mode, Outdoor Mode)
**Brightness Set**
 Picture Level         ±0
 Light PEAK/AVG         0
 Light Area       Top Cut
 Auto ND(ELC)       (OFF)
 Auto Gain Up       (OFF)
  AGC Max Gain      (---)
 Manual Gain Up     (0dB)
 Digital Gain Up      0dB
 Charge Time          OFF
 Pedestal            (±0)
Return
**Color...

• ON is automatically selected when the electronic
shutter (5-2) on the submenu [Other Set] is set to
[Auto ND]. OFF is selected when other than [Auto
ND] is selected.
• ON is selected when the SHUTTER switch is set
to [ELC] in RCU (RCB) mode, and OFF is select-
ed when it is set to other than [ELC].
-34-
Setting and Changing of the
Setting (Halogen Mode, 
Fluorescent Mode, Outdoor Mode)
1 Brightness Set Display
1. Video Level Adjustment [Picture Level: –50 to +50]
Convergence level of AUTO IRIS/AUTO...

-35-
5. Auto Gain Up Control Setting 
[Auto Gain Up: OFF, ON]
This cannot be set when “Auto” has been set for the
CCD storage time setting (1-9).
OFF:The light quantity is not adjusted 
automatically.
ON: The light quantity is adjusted automatically.
The maximum to which the gain can be
increased using the auto gain up function is
selected by the AGC maximum gain setting (1-6).
6. AGC Maximum Gain 
[AGC Max Gain: 6dB, 12dB, 18dB, 24dB, N/Eye L,
N/Eye H] (AW-E750, AW-E655, AW-E650)
[AGC Max Gain: 6dB,...

9. CCD Storage Time Setting 
[Charge Time: Auto, OFF, 1/30s, 1/15s, 1/8s, 1/4s,
1/2s, 1s, 2s]
This is used to set the CCD storage time.
Auto:ALC is performed followed by AGC and then
by the data storage, and the camera automatical-
ly adjusts the light quantity.
If “ON” is selected as the auto ND (ELC) setting
(1-4), ELC is performed followed by ALC, AGC
and then by the data storage in this order, and
the light quantity is automatically adjusted.
The electronic shutter setting (5-2) cannot be
changed....

-37-
2Color Set Display
1. Chroma Level Adjustment 
[Chroma Level: –3 to +3]
Chroma Level can be decreased or increased to 
any of three levels each.
2. Skin Color Adjustment [Flesh Tone: –3 to +3]
Skin color can be decreased or increased to any of
three levels each.
3. White Balance Setting 
[White Bal: ATW, AWC A, AWC B, P SET 3 200K, 
P SET 5 600K]
ATW:The white balance is automatically adjusted to
be always right.
AWC A, AWC B:Once the white balance is adjusted
with the ITEM/AWC switch on the back of...

-38-
3G/L Adjustment Set Display
1. Horizontal Phase Adjustment 
[H Phase: –206 to +49]
Horizontal phase can be adjusted when a genlock
signal is supplied.
2. Sub Carrier Phase Coarse Adjustment 
[SC Coarse: 1, 2, 3, 4]
Coarse adjustment of subcarrier phase can be made
when a genlock signal is supplied.
3. Subcarrier Phase Fine Adjustment 
[SC Fine: –511 to +511]
Fine adjustment of subcarrier phase can be made
when a genlock signal is supplied.
4. Color Bar Setup Setting 
[Color Bar Set: 0.0 IRE, 7.5...

-39-
3. Noise Suppress Level Setting 
[Noise Suppress: OFF, LOW, HIGH]
Screen noise can be reduced when Detail Level set-
ting (4-2) is at HIGH or LOW.
4. Clean DNR Setting [Clean DNR: HIGH, LOW, OFF]
This enables the clean DNR effect to be selected.
5. 3D-DNR Setting [3D-DNR: OFF, Low, Mid, High]
This enables the 3D-DNR effect to be selected.
❈When “Mid” or “High” is selected, the noise is
reduced but lag increases.
6. DTL Flesh Tone Setting 
[DTL Flesh Tone: LOW, MID, HIGH]
LOW:The roughness of the...

-40-
Shutter Speed
OFF
1/100
1/250
1/500
1/1 000
1/2 000
1/4 000
1/10 000Required luminance ratio
1
2
4
8
16
32
64
160 Synchro-scan-
100.3 Hz
250.0 Hz
492.2 Hz
984.4 Hz
1.969 kHz
3.938 kHz
7.875 kHz
4. CCD Read Out Mode Setting 
[V Resolution: Normal, Fine]
Normal:Normal image. (CCD storage will be by field
storage.)
Fine:Vertical resolution increases. (Vertical resolution
is raised without increasing residual images by
frame storage and Electronic shutter.)
Normal is recommended for general use be-...