Panasonic Convertible Camera Aw E750 Operating Instructions

-21-
CONNECTION WITH MULTIPLE CAMERAS (COLOR LOCK MODE)
•An example of connection for VBS/BB input (Color lock
mode).
•One of the multiple cameras is used as the source of ref-
erence signals.
•Supply a synchronizing signal (BB) to the G/L Input
Connectors of each cameras.•Do not switch off the camera used for supplying the
reference signals.
•Adjust the SC-phase and H-phase at the Video
Output Connector.
30
10 m 5 3 21.5 0
II 15 10 7 5 1
5.5 10 20 40 77
30
10 m 5 3 21.5 0
II 15 10 7 5 1
5.5 10 20 40...

-22-
CONNECTION OF COMPUTER
The AW-CA50T9 PC control cable is required to control the camera using a computer. Consult your dealer for details.
The user is responsible for providing the software used to control the camera.
O    IFUSEFUSE
DC Power Cable
AW-CA4T1
Computer VIDEO OUT Connector
AC ADAPTOR AW-PS50575 ΩCoaxial Cable
Composite Video
Input Connector
(VIDEO IN)Video Monitor
RS-232C PC Control Cable AW-CA50T9 (10m)
CONNECTION OF DEVICES WITH CAMERA PAN/TILT CONTROL SYSTEM
• Refer to the operating...

-23-
AUTOMATIC WHITE BALANCE
CONTROL (AWC)
There are two white balance memories, “AWC A” or
“AWC B” for two different light sources color tempera-
tures, with the automatic white balance setting. Then,
when the two different light sources are encountered,
you may operate the camera properly by simply
change the white balance mode to either AWC A or
AWC B. There is no need to readjust the camera to the
ambient conditions.
* The preset conditions will be renewed whenever
you input new conditions.
1. Turn...

-24-
Notes:
•For white balance setting aim the camera at a
white object and try to position it in the center of
the monitor screen. The object must appear in
over 10 % of the total monitor screen area. Try
to avoid overly bright objects in the scene.
•White balance may not be correctly set if the
lighting of the object is too weak.
•Since the camera has a built-in memory, the set
white balance will remain in the memory even if
power is turned off. Therefore, it is not neces-
sary to reset the white...

-25-
RESET TO 3 200K OR 5 600K WHITE
BALANCE
When the white balance setting is set to either “P SET
3 200K” or “P SET 5 600K” the white balance will be
automatically set to the color temperature 3 200K or
5 600K, respectively.
BLACK BALANCE ADJUSTMENT
•Close the lens.
If the motor drive lens is controlled from the cam-
era, the lens is automatically closed when the black
balance is adjusted.
•When the camera is used without a RCU or RCB,
R/B pedestal adjustment of painting setting will be
automatically...

-26-
TOTAL PEDESTAL LEVEL ADJUST-
MENT
(Use an oscilloscope or a waveform monitor for this
adjustment.)
This step is to adjust the black levels (pedestal levels)
of two or more cameras to be the same.
[ADJUSTMENT by CAMERA]
1. Close the lens.
2. Select Pedestal item in the brightness setting Sub
Menu (Select [Pedestal] in the [Iris, Shutter, Gain
Set] sub menu in USER MODE.)
3. Set the pedestal level to 5 IRE (0.035 V) with the
YES/ABC switch or the NO/BAR switch.
[ADJUSTMENT with RCU (RCB, Hybrid...

-27-
[ADJUSTMENT by CAMERA]
1. Press the NO/BAR switch for over 5 seconds to dis-
play the color bar.
2. Select [G/L Adjustment] on the main menu, then
select [H PHASE] on the submenu.
3. Adjust the horizontal phase with the YES/ABC and
NO/BAR switch.
External gen-lock input signal
(black burst output of special
effect generator)
Video signal
[ADJUSTMENT with RCU (RCB, Hybrid control panel)]
Use the horizontal phase control.
GEN-LOCK ADJUSTMENT
Phase adjustments must be performed with the camera
or the...

-28-
COLOR PHASE ADJUSTMENT
Supply the output signal (split color bar) from the color
special effect generator to a color monitor or vec-
torscope. Adjust the color phase of the camera.
[ADJUSTMENT with RCU (RCB, Hybrid control panel)]
Use the subcarrier phase coarse adjustment control
and subcarrier phase fine control.
* It is recommended that a vectorscope be used for
maximum accuracy in color phase adjustment.
[ADJUSTMENT by CAMERA]
1. Press the NO/BAR switch for over 5 seconds for the
color bar...

-29-
Use Mode Setting
The camera has four use modes, and various functions
for four use modes have been preset.
Functions can be set as best suited to each use mode.
•Halogen mode
Suited to indoor shooting, such as at weddings,
parties, lecture meetings, events, etc.
Settings can be changed using a simple menu.
•Fluorescent mode
Suited to indoor shooting under fluorescent lighting.
Settings can be changed using a simple menu.
•Outdoor mode
Suited to outdoor shooting.
Settings can be changed using a...

Operation mode
-30-
SETTING BY RCU (RCB) OR HYBRID
CONTROL PANEL
An operation mode is selected depending on the posi-
tion of the scene file switch.
Halogen Mode
Fluorescent Mode
Outdoor Mode
Users Mode
Scene File
Switch
Position of
RCU (RCB)
1
2
3
USER SETScene File
Switch
Position of
Hybrid control
panel
1
2
3
4
CAMERA RCU (RCB) Hybrid Control Panel
ITEM/AWC
YES/ABC
NO/BAR MENU
SCENE
FILE
SwitchSCENE FILE Switch