Home > Panasonic > Camera > Panasonic Convertible Camera Aw E750 Operating Instructions

Panasonic Convertible Camera Aw E750 Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Convertible Camera Aw E750 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Convertible Camera
    AW-E750
    AW-E655
    AW-E650
    AW-E350
    Before attempting to connect, operate or adjust this product, 
    please read these instructions completely.
    AW-E350 AW-E750AW-E650
    AW-E655 
    						
    							-2-
    CAUTION
    RISK OF ELECTRIC SHOCK
    DO NOT OPEN
    CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 
    DO NOT REMOVE COVER (OR BACK).
    NO USER SERVICEABLE PARTS INSIDE.
    REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.
    The lightning flash with arrowhead symbol, within
    an equilateral triangle, is intended to alert the
    user to the presence of uninsulated “dangerous
    voltage” within the product’s enclosure that may
    be of sufficient magnitude to constitute a risk of
    electric shock to persons.
    The exclamation point within an equilateral
    triangle is intended to alert the user to the
    presence of important operating and
    maintenance (service) instructions in the
    literature accompanying the appliance.
    WARNING:
    TO REDUCE THE RISK OF FIRE OR SHOCK
    HAZARD, DO NOT EXPOSE THIS EQUIPMENT
    TO RAIN OR MOISTURE.
    CAUTION:
    TO REDUCE THE RISK OF FIRE OR SHOCK
    HAZARD AND ANNOYING INTERFERENCE, USE
    THE RECOMMENDED ACCESSORIES ONLY.
    indicates safety information.
    FCC Note:
    This device complies with Part 15 of the FCC Rules. To
    assure continued compliance follow the attached
    installation instructions and do not make any
    unauthorized modifications.
    This equipment has been tested and found to comply with
    the limits for a class A digital device, pursuant to Part 15
    of the FCC Rules. These limits are designed to provide
    reasonable protection against harmful interference when
    the equipment is operated in a commercial environment.
    This equipment generates, uses, and can radiate radio
    frequency energy and, if not installed and used in
    accordance with the instruction manual, may cause
    harmful interference to radio communications. Operation
    of this equipment in a residential area is likely to cause
    harmful interference in which case the user will be
    required to correct the interference at his own expense.
    This Class A digital apparatus complies with Canadian
    ICES-003.
    Cet appareil numérique de la class A est conforme à la
    norme NMB-003 du Canada.
    For CANADA
    The serial number of this product may be found on the
    bottom of the unit. 
    						
    							-3-
    CONTENTS
    PREFACE ................................................................................................................................................................................ 4
    FEATURES .............................................................................................................................................................................. 5
    SPECIAL NOTES ON OPERATION  ......................................................................................................................................... 6
    PRECAUTIONS ....................................................................................................................................................................... 7
    MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ................................................................................................. 9
    MOUNTING ............................................................................................................................................................................ 13
    FLANGE BACK ADJUSTMENT (FOR ZOOM LENS) ............................................................................................................... 15  
    IRIS GAIN CONTROL IN A LENS  ........................................................................................................................................... 17
    CONNECTIONS ...................................................................................................................................................................... 18
    ADJUSTMENT ........................................................................................................................................................................ 23
    USE MODE SETTING  ............................................................................................................................................................. 29
    MENU ITEM SETTING  ............................................................................................................................................................ 31
    SETTING AND CHANGING THE OPTIONAL CARDS ............................................................................................................. 54
    SETTING TO INITIAL SET  ....................................................................................................................................................... 56
    APPEARANCE ........................................................................................................................................................................ 60
    SPECIFICATIONS ................................................................................................................................................................... 64
    STANDARD ACCESSORIES  ................................................................................................................................................... 68 
    						
    							-4-
    • The Panasonic AW-E750, AW-E655, AW-E650 and
    AW-E350 are digital signal processing color video
    cameras that incorporates three CCDs;
    2/3 3CCD (AW-E750)
    1/2 3CCD (AW-E655, AW-E650)
    1/3 3CCD (AW-E350)
    A digital video signal processing system is packed in
    a compact, lightweight body while assuring high 
    picture quality, high reliability and high performance.
    • System setup and adjustments can be easily 
    performed by following the setup menu.
    • Connection to peripheral devices, such as a RCU, a
    RCB and a lens and the camera pan/tilt unit enables a
    wide variation of system configurations.
    PREFACE
    • Option cards may also be installed.
    ❈The following cards are not available for AW-E750,
    AW-E655, AW-E650, AW-E350;
    · AW-PB301 Component Studio Card
    · AW-PB302 RGB Card: The camera unit 
    contains this function.
    · AW-PB303 High-sensitivity Card: 
    The camera unit 
    contains this function.
    · AW-PB304 SDI Card: Use AW-PB504.
    · AW-PB306 Studio SDI Card: Use AW-PB506.
    · AW-PB307 SVGA card
    · AW-PB309 WEB card
    · AW-PB310 IEEE 1394 Card 
    						
    							-5-
    1. Digital video signal processing for high quality, high
    reliability, high performance, lightweight and 
    compact size.
    2. Resolution: 850 lines (HIGH BAND DTL: ON)
    S/N ratio:
    67dB (DNR ON) (AW-E750, AW-E655, AW-E650)
    66dB (DNR ON) (AW-E350)
    3. Minimum illumination:
    0.00005 lx (AW-E750, AW-E655, AW-E650)
    0.00015 lx (AW-E350)
    4. The built-in CCD storage function and digital gain up
    function provide an even higher degree of high 
    sensitivity.
    5. RGB, Y/Pr/Pb and Y/C signal output circuits 
    provided.
    6. Motorized filters containing IR through and ND 
    filters (1/16, 1/64) incorporated (model AW-E655
    only).
    7. Built-in automatic controls, including ATW, ELC, and
    AGC.
    FEATURES
    8.CCD readout is switchable between field and frame
    modes. Vertical resolution can be stepped up in
    frame mode and it is effective for shooting still
    objects.
    9. The built-in synchronized scanning system reduces
    noise in computer graphics.
    10. Various correction circuits permit video reproduction
    with high fidelity.
    11. Chroma detail correction enables clear shots of dark
    color objects.
    12. A dark detail circuit provides natural edge 
    correction to any object in a dark scene.
    13. A digital color matrix enables high fidelity color
    images.
    14. The 12-axis digital color matrix enables users’ to
    create images of their choice.
    15. Four use modes for each of your specific 
    applications can be selected.
    16. SMPTE color bar is indicated on the monitor screen.
    17. Remote control with a RCU, RCB or a Hybrid control
    panel. 
    						
    							-6-
    • Turn power off before connecting or disconnecting
    cables.
    • Connection or disconnection of any studio cable,
    RCB cable or other cable to any unit of equipment
    must be performed while power is off.
    • While the camera is in automatic mode;
    Shooting of bright objects in ELC operation mode
    may result in a smeared picture unique to the CCD.
    The ATW function under fluorescent illumination can
    adversely change the white balance.
    SPECIAL NOTES ON OPERATION
    • There is a cooling fan inside.
    Do not cover the port or otherwise block ventilation
    during operation. Internal heat buildup can cause a
    fire.
    It is an expendable part, and must be replaced
    about every 30 000 hours. (Whenever fan replace-
    ment is necessary, be sure to ask the store where
    you purchased the set.) (AW-E750, AW-E655) 
    						
    							-7-
    DONTS
    • Do not attempt to disassemble the camera, Remote
    Control Unit (RCU) or other units. In order to pre-
    vent electric shock, do not remove screws or cov-
    ers. There are no user-serviceable parts inside.
    • Do not abuse the camera. Avoid striking, shaking,
    etc. The camera contains sensitive components
    which could be damaged by improper handling or
    storage.
    • Do not let the lens remain uncapped when the cam-
    era is not in use. If the lens is not installed, do not
    leave the lens mount hole uncovered.
    • Do not touch the surface of the lens or prism.
    • Do not use strong of abrasive detergents when
    cleaning the camera body.
    • Do not aim the camera toward the sun, no matter
    whether it is turned on or not.• Do not expose the camera or Remote Control Unit
    (RCU) to rain or moisture, and do not try to operate
    the equipment in wet conditions. Do not operate the
    camera or RCU if it becomes wet.
    • Do not operate the camera or Remote Control Unit
    (RCU) outdoors during a lightning storm.
    • Do not use the camera in an extreme environment
    where high temperatures or high humidity exist.
    • Do not leave the camera and Remote Control Unit
    (RCU) turned on when not in use. Do not unneces-
    sarily turn the camera power on and off repeatedly.
    Do not block the ventilation slots.
    • Do not cover the port otherwise block ventilation
    during operation. Internal heat buildup can cause a
    fire.
    PRECAUTIONS 
    						
    							-8-
    • Take immediate action if ever the camera or RCU
    should become wet. Turn the power off and have
    the unit checked by an authorized service facility.
    • Follow normal safety precautions to avoid personal
    injury.
    • Use the camera in an environment where the tem-
    perature is within 14°F to 113°F (−10°C to +45°C),
    and the relative humidity is within 30 % to 90 %.
    • Always turn the power off when the camera is not
    going to be used. Operate the camera and RCU
    only when there is adequate ventilation.
    DOS
    • Refer any servicing to qualified service personnel.
    • Handle the camera with care.
    • Protect the precision made lens by placing the lens
    cap over when the camera is not in use. If the lens
    is not installed, protect the surface of the prism by
    placing the body cap into the lens mount hole.
    • Use a mild blower or lens cleaning tissue designed
    for coated lenses, to clean the surface of the lens or
    prism in the event that it should become dirty.
    • Use a dry cloth to clean the camera if it is dirty. In
    case the dirt is hard to remove, use mild detergent
    and wipe gently.
    • Use caution when operating the camera in the
    vicinity of spot lights or bright lights, as well as light
    reflecting objects and surfaces. 
    						
    							-9-
    MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
    r
    t
    q
    we
    y
     
    
    (model AW-E655 only) 
    						
    							-10-
    2. Lens fixing ring knob
    Rotate the lens fixing ring knob counterclockwise
    and remove the lens mount cap. Mount the lens on
    the camera and rotate the lens fixing ring knob
    clockwise in order to fix the lens securely.
    3. Mic Jack (model AW-E655 only)
    This is a ø3.5 mm mic jack which supports PLUG IN
    POWER. Use the microphone which has more than
    1kΩof impedance, unbalanced.
    4. Mounting hole
    To install the camera on a wall or ceiling or to use a
    pan/tilt head or tripod, secure the unit using this
    screw hole (1/4-20UNC) or using the accessory
    mounting adaptor.
    5. Cooling Fan (models AW-E750, AW-E655 only)
    The cooling fan can be set to “Auto” or “OFF” on
    the menu.
    6. Expansion Slot
    Remove the cover, and connect the expansion card
    box.
    <
    >
    ?
    @
    ;
    = 7
    yy
    8
    yy
    9
    yy
    :
    yy
    
    A
      
    C B
    1. Lens Mount
    2/3 Standard bayonet type (B4 mount) lens 
    (AW-E750)
    1/2 Standard bayonet type (B4 mount) lens 
    (AW-E655, AW-E650)
    1/3 C mount lens (AW-E350) 
    One of the lenses listed above or a microscope
    adaptor is installed on this mount. 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Convertible Camera Aw E750 Operating Instructions