Panasonic Convertible Camera Aw E300a Operating Instructions
Here you can view all the pages of manual Panasonic Convertible Camera Aw E300a Operating Instructions. The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 1
Convertible Camera AW-E300AP Before attempting to connect or operate this product, please read these instructions completely. (Lens : Optional accessory)
Page 2
This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead sym- bol, within an equilateral triangle, is intended to alert the user to the pres- ence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient...
Page 3
-1- CONTENTS PREFACE ................................................................................................................................................................................ 2 FEATURES .............................................................................................................................................................................. 2 SPECIAL NOTES ON OPERATION...
Page 4
-2- The Panasonic AW-E300A is a digital signal processing color video camera that incorporates three 1/3” CCDs. A digital video signal processing system is packed in a compact, lightweight body while assuring high picture quality, high reliability and high performance. System setup and adjustments can be easily performed 1. Digital video signal processing for high quality, high reliability, high performance, lightweight and com- pact size. 2. Resolution: 850 lines (HIGH BAND DTL:...
Page 5
-3- 11. A digital highlight chroma circuit reproduces natural dynamic ranges. 12. A digital color matrix enables high fidelity color images. 13. Four use modes for each of your specific applica- tions can be selected. 14. SMPTE color bar is indicated on the monitor screen. 15. Remote control with a RCU, RCB or a Hybrid con- trol panel. • Turn power off before connecting or disconnecting cables. • Connection or disconnection of any studio cable, RCB cable or other...
Page 6
-4- DONT'S • Do not attempt to disassemble the camera, Remote Control Unit (RCU) or other units. In order to pre- vent electric shock, do not remove screws or cov- ers. There are no user-serviceable parts inside. • Do not abuse the camera. Avoid striking, shaking, etc. The camera contains sensitive components which could be damaged by improper handling or storage. • Do not let the lens remain uncapped when the cam- era is not in use. If the lens is...
Page 7
-5- • Take immediate action if ever the camera or RCU should become wet. Turn the power off and have the unit checked by an authorized service facility. • Follow normal safety precautions to avoid personal injury. • Use the camera in an environment where the tem- perature is within −10°C - +45°C (14°F - 113°F), and the relative humidity is within 30 % - 90 %. • Always turn the power off when the camera is not going to be used. Operate the camera...
Page 8
Convertible Camera AW – FOCUS LOCK 87A00001 SER NO -6- MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
Page 9
-7- 3. Flange-back Adjustment Screws (FOCUS/LOCK) When flange-back adjustment is necessary, loosen the lock screw and turn the focus screw to adjust the flange-back. 4. MENU Switch (MENU/ ) A menu will appear on the monitor screen when this switch is pressed for about 5 seconds. This item can be selected by pressing the switch while the menu is on the screen. 5. ITEM/AWC Switch (ITEM/AWC/ ) The item just below can be selected by pressing this switch while the...
Page 10
-8- Pin No. Signal Pin No. Signal 1 Return Control 7 Iris Follow 2 Not Used 8 Auto/Remote Control 3 GND 9 Not Used 4 Auto/Manual Control 10 Not Used 5 Iris Control 11 Not Used 6 Lens Power 12 Not Used Iris Connector (IRIS) oq iw u e y tr !2!0 !1 10. I/F Remote Connector (I/F REMOTE) Input terminal dedicated to control signals from the optional Remote Control Box (RCB) (WV-CB700A) and the RCU (WV-RC700A, WV-RC550) and the camera pan/tilt unit (AW-PH300). * WV-CB700A is connected through...