Panasonic Combination Vcr Pv C2062 Operating Instructions

11
Basic Operation
Clock,         Time Zone Adjust
3)Press  to
select TIME ZONE
ADJUST and
press 
 or  to
subtract or add
hour(s) as
necessary.
4)Press ACTION
twice to exit.
(Only when Auto Clock is set.)
Add or Delete a Channel
Time Zone Adjust
1)Press   to
select “CLOCK.”
M A I N  MENU
VCR
CLOCKC H
SET          : ACT I ON   SELECT  :                               
T V
EX I T
C H
LANGUAGE
2)Press ACTION.
AUTO  CLOCK  SETMANUALT I ME  E  ZOZONE    ADJUSJUST   T   : 0
SELECT :          SET       :...

12For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Record On a Tape Playback a Tape
1
Insert a cassette.
Press PLAY* Playback begins if cassette has no record
tab.2
 The unit power comes
on automatically.
To prevent tape jam,
Record
tab

Stop => Press STOP

Rewind tape => Press REW in Stop mode

Fast forward tape =>
 Press FF in Stop mode
Eject tape => Press EJECT on the remote or
STOP/EJECT on the unit
Ready Check List
All connections are made.
Your...

13
Basic Operation
umber keys
ottom of next page.
Copy Your Tapes  (Dubbing)
Unauthorized exchanging
and/or copying of copyrighted
recordings may be copyright
infringement.
Connections you’ll need to make.
Playback (Source)
1
Recording (Editing) unit
Insert pre-
recorded tape.Insert blank tape with
record tab.
 Dubbing tapes protected
with Copy Guard will have
poor quality results.
2
3
4
5
Press PLAY then
PAUSE at starting
point to put in
Standby mode.
Press PLAY
to start dubbing.
Press STOP
to stop...

14For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
VIDEO IN AUDIO INPOWER VOL CHSTOP/EJECT REW/
PLAY/REPEATFF/ REC TIMER/FMACTIONR E C ON TIMERVIDEO IN AUDIO INPOWER VOL CHSTOP/EJECT REW/
PLAY/REPEATFF/ REC TIMER/FMACTIONREC ON TIMERPROG TIMERPROG TIMER
TV Operation
1
Press POWER* on the remote or unit.

Using the 100 key
When selecting CABLE channels 100 to 125 with the number keys, first press the 100
key, and then enter the remaining two digits....

15
TV Operation
STOP       1 2 : 0 0AMABC 0 : 0 0 : 0 0 SPSTEREOSAPMONO
STOP       1 2 : 0 0AMABCSTEREOSAPMONO
STOP       1 2 : 0 0AMABCSTEREOSAPMONO
k List
 made.
d in.
Receivable Broadcast Types
The following are possible audio broadcast types and
on-screen displays. The signal being received is indicated with
an “ 
 ” mark while the selected audio mode is indicated with an
arrow. To change the audio mode for these broadcasts, see the
“Select Audio Mode for TV Viewing” section (below.)
Press DISPLAY to...

16For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
1
ON-TIMER with Alarm
TV Timer  Features
Ready Check List
The clock is set to correct time.This unit can be set to automatically power on in one of 2
modes (TV, Playback, or FM radio).
You can also combine the On-Timer with a one minute
alarm that gradually increases in volume.
If no button on the remote or unit
(including a button used to turn off
the alarm) is pressed within 60
minutes after unit...

17
TV Operation
Press SLEEP repeatedly
to set SLEEP TIMER.
Pressing DISPLAY with
sleep timer set displays
remaining time.
Press SLEEP repeatedly
until “SLEEP TIMER 00”
appears to cancel.
Sleep Timer
This unit can be set for auto power off.
ck List
correct time.
SLEEP TIMER 30
SLEEP TIMER 60
SLEEP TIMER 90
SLEEP TIMER 00
Instant Alarm
You can set a timer alarm up to 60 min. Useful when you are
cooking, etc.
1
2
3
To cancel, press TIMER/FM then press ADD/DLT on
the remote while CANCEL/SET screen is...

18For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
OFFCAP  C1
TEXT  C1CAP  C2TEXT  C2
M A I N  MENU
T VVCR
EX I T
CLOCKC H
LANGUAGE
SET          : ACT I ON SELECT  :                              
Closed Caption Mode Feature
1
2
3
4
5
Closed Caption System
Closed Caption is ...This multi-use system not only allows the hearing impaired to enjoy selected programs,
but also makes useful information from TV stations available to everyone.
Press ACTION*
to...

19
TV Operation
1
2
4
6
5
3
7
Press ACTION three times to return to
the normal screen.
NOCAP C1
CAP C2
M A I N  MENU
T VVCR
EX I T
CLOCKC H
LANGUAGE
SET          : ACT I ON SELECT  :                              
Caption On Mute Feature
Closed Caption narration, if available, is displayed
when MUTE button is pressed for silence.
Press ACTION to display MAIN MENU.
1)Press 
  to
select “TV.”
2)Press ACTION to
display SET UP TV
screen.
1)Press 
 to
select “CAPTION”.
2)Press 
 to display
CAPTION screen....

20For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
FM Radio
2
Press a number
key (1~9) to
select the FM
number.
1
To Make Corrections,
select station with a number key, then do
step 3 again.
To exit FM mode,
press FM/TV on the remote or TIMER/FM
twice on the unit.
1)Press CH 
to select the
desired radio
station. 
(Each
press changes
frequency 200
KHz.)
2)Press ADD/
DLT to set the
radio station.
Hold down CH or  for a few
seconds, then
release to...