Panasonic Combination Vcr Pv C2062 Operating Instructions

							11
Basic Operation
Clock,         Time Zone Adjust
3)Press  to
select TIME ZONE
ADJUST and
press 
 or  to
subtract or add
hour(s) as
necessary.
4)Press ACTION
twice to exit.
(Only when Auto Clock is set.)
Add or Delete a Channel
Time Zone Adjust
1)Press   to
select “CLOCK.”
M A I N  MENU
VCR
CLOCKC H
SET          : ACT I ON   SELECT  :                               
T V
EX I T
C H
LANGUAGE
2)Press ACTION.
AUTO  CLOCK  SETMANUALT I ME  E  ZOZONE    ADJUSJUST   T   : 0
SELECT :          SET       :            
END       : ACT I ON      
             SET  CLOCK  
AUTO  CLOCK  SETMANUALT I ME  E  ZOZONE    ADJUSJUST   T   : +1+1
SELECT :          SET       :          
END       : ACT I ON      
             SET  CLOCK  
CHANNEL  08  ADDED
To add channel:Select channel with
number keys and
press ADD/DLT.
CHANNEL  08  DELE TED
To delete channel:Select channel with
CH  or number keys
and press ADD/DLT.
ACTION key on
the unitUsing   keys
  : CH UP
 
 : CH DOWN
 
 : VOLUME UP
 
 : VOLUME DOWN
Whenever the menu or
program screen is displayed,
CHANNEL UP/DOWN function
as 
 and VOLUME UP/
DOWN function as   only.
On RemoteOn Unit
On Unit
You can operate the
menu screen using
unit buttons. To display
the menu, press STOP/
EJECT and REW
together with no tape
inserted. To  exit  the
menu, repeat above
with or without tape
inserted until normal
screen appears.
POWER
ACTION
ADD/DLT NUMBER Keys SELECT/SET
 :CH UP :CH DOWN :VOL UP :VOL DOWN
STOP/EJECTSTOP/EJECTREW/REW/
ACTIONACTION
*Important:
If a remote control button does not
work when pressed, press the
COMBO button on the remote and
try the button again.
VOLVOLCHCH
Model PV-C2062
remote shown.
LSQT0582A_P10-21.p6512/14/2001, 2:04 PM 11 
						

							12For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Record On a Tape Playback a Tape
1
Insert a cassette.
Press PLAY* Playback begins if cassette has no record
tab.2
 The unit power comes
on automatically.
To prevent tape jam,
Record
tab

Stop => Press STOP

Rewind tape => Press REW in Stop mode

Fast forward tape =>
 Press FF in Stop mode
Eject tape => Press EJECT on the remote or
STOP/EJECT on the unit
Ready Check List
All connections are made.
Your unit is plugged in.
Press CH  or number keys
to Select Channel.
 For “LINE” input, see bottom of next page.2
3
4
 After the unit has been in Rec Pause mode for
5 minutes, it will stop automatically to protect
the tape and the video head.
 The remaining recording time of an OTR can be
displayed by pressing DISPLAY.

Stop => Press STOP

One Touch Recording (OTR)
Press REC repeatedly
to set the recording
length (30 min - 4 hours).
 The unit stops recording at a preset time.
 PROG TIMER indicator lights on the unit.
1
Insert a cassette with record tab. The unit power comes on automatically.
Notes remove loose or peeling
labels from tapes.

Forward/Reverse scene search
  =>Press FF or REW
  =>Press again or PLAY to release.

Still (Freeze) picture
  =>Press PAUSE/SLOW
  =>Press PLAY to release.

Slow Motion picture
  =>Hold down PAUSE/SLOW in
Still mode
  =>Press PLAY to release.

Frame by Frame picture
  =>Press PAUSE/SLOW in Still mode
  =>Press PLAY to release.
Press SPEED to select recording
speed (see page 4).
SP = Standard Play
LP = Long Play
SLP = Super Long Play
 Selected speed is displayed.
Press REC to start recording. To edit out unwanted portions, press
PAUSE/SLOW to pause and resume
recording.
 You cannot view another channel during
recording.
You can operate on the unit
 These features work best in SLP mode.
 After the unit is in Still or Slow mode for 3
minutes, it will switch to Stop mode automatically
to protect the tape and the video head.Notes
Normal Rec0:301:00
1:302:003:004:00
VIDEO IN AUDIO INPOWER VOL CHSTOP/EJECT REW/
PLAY/REPEATFF/ REC TIMER/FMACTIONREC ON TIMERVIDEO IN AUDIO INPOWER VOL CHSTOP/EJECT REW/
PLAY/REPEATFF/ REC TIMER/FMACTIONR E C ON TIMERPROG TIMERPROG TIMER
Insert a cassette.CH
PLAY
REC
REC IndicatorPress to stop and/or eject tapeModel PV-C2062
remote shown.
LSQT0582A_P10-21.p6512/14/2001, 2:04 PM 12 
						

							13
Basic Operation
umber keys
ottom of next page.
Copy Your Tapes  (Dubbing)
Unauthorized exchanging
and/or copying of copyrighted
recordings may be copyright
infringement.
Connections you’ll need to make.
Playback (Source)
1
Recording (Editing) unit
Insert pre-
recorded tape.Insert blank tape with
record tab.
 Dubbing tapes protected
with Copy Guard will have
poor quality results.
2
3
4
5
Press PLAY then
PAUSE at starting
point to put in
Standby mode.
Press PLAY
to start dubbing.
Press STOP
to stop dubbing.Select “LINE” mode.
See “Selecting Input Mode” below.
Press REC, then
PAUSE/SLOW
immediately to put in
Standby mode.
Press PAUSE/SLOW
to start dubbing.
Press STOP
to stop dubbing.
Selecting Input Mode
Method 1:
Press CH . The display will change as follows.
Method 2:
a Press ACTION for MAIN MENU.
b Press 
  to select “TV”, then press
ACTION for SET UP TV screen.
c Press 
 to select “INPUT SELECT,” and
then press  to select “TUNER” or “LINE.”
d Press ACTION twice to exit this mode.
Caution
AUDIO IN
Recording (Editing) unit
OUT
IN    IN FROM ANT.
OUT TO TV
AUDIO
VIDEO IN
Playing (Source) VCR
VIDEO
AUDIO IN
(Perform operation of steps 4 and 5 on both units at same time.)
STOP
1
23
125 LINE(CABLE)
69 (TV)
or
Our Vacation
*Important: If a remote control button does not work when pressed, press the COMBO button
                 on the remote and try the button again.
LSQT0582A_P10-21.p6512/14/2001, 2:04 PM 13 
						

							14For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
VIDEO IN AUDIO INPOWER VOL CHSTOP/EJECT REW/
PLAY/REPEATFF/ REC TIMER/FMACTIONR E C ON TIMERVIDEO IN AUDIO INPOWER VOL CHSTOP/EJECT REW/
PLAY/REPEATFF/ REC TIMER/FMACTIONREC ON TIMERPROG TIMERPROG TIMER
TV Operation
1
Press POWER* on the remote or unit.

Using the 100 key
When selecting CABLE channels 100 to 125 with the number keys, first press the 100
key, and then enter the remaining two digits.

Rapid Tune
Press R-TUNE to display the last channel you were watching.

Audio Mute
Press MUTE to instantly mute the sound. Press again to restore the previous sound level.

Phones
Connect an earphone (not supplied) or headphones (not supplied) to the Phones Jack.
NIGHT (NITE) Mode
Color and picture intensity levels are adjusted so the screen
is easier on your eyes during night time use.
Press NITE to set
NIGHT mode.
 NIGHT mode may be
selected when watching TV
or playing a tape.
Press NITE to cancel. Previous settings are restored.
 NIGHT mode is canceled
when power is turned off or
power failure occurs.
N I GHT
Ready Check List
All connections are made.
Your unit is plugged in.
Use CH  or
number keys to
select a channel.
20 8ABC
3
Press VOL + or VOL
- to adjust volume.
24
PHONES
Jack
POWER VOL + / VOL
-
CH 
*Important: If a remote control button does not work when pressed, press the COMBO button
                 on the remote and try the button again.
LSQT0582A_P10-21.p6512/14/2001, 2:04 PM 14 
						

							15
TV Operation
STOP       1 2 : 0 0AMABC 0 : 0 0 : 0 0 SPSTEREOSAPMONO
STOP       1 2 : 0 0AMABCSTEREOSAPMONO
STOP       1 2 : 0 0AMABCSTEREOSAPMONO
k List
 made.
d in.
Receivable Broadcast Types
The following are possible audio broadcast types and
on-screen displays. The signal being received is indicated with
an “ 
 ” mark while the selected audio mode is indicated with an
arrow. To change the audio mode for these broadcasts, see the
“Select Audio Mode for TV Viewing” section (below.)
Press DISPLAY to display
the broadcast signal being received.
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo
(main language) and Secondary Audio
Program (sub language) broadcasts are
being received simultaneously. Select
the STEREO or SAP audio mode.
MTS Stereo broadcast
Multi-channel Television Sound Stereo
broadcast. Select STEREO audio mode.
 If stereo broadcast is weak and the
display flickers, select MONO audio
mode for possibly better results.
SAP broadcast
Secondary Audio Program
(sub language).
Select SAP audio mode for the sub
language.
Select Audio Mode for TV Viewing
Press AUDIO to select the desired audio mode as described above.(Arrow shows selection.) Each press of AUDIO will change the audio mode as shown below.
 “SAP” is selected with first press of AUDIO.
MTS Broadcast/TV Stereo System
MONO broadcast
Normal monaural sound broadcast.
STOP       1 2 : 0 0AMABCSTEREOSAPMONO
STOP       1 2 : 0 0AMABC 0 : 0 0 : 0 0 SPSTEREOSAPMONO
STOP       1 2 : 0 0AMABCSTEREOSAPMONO
STOP       1 2 : 0 0AMABCSTEREOSAPMONO
< Example >
Press AUDIO
Press AUDIO Press AUDIO
Equipped with ® -TV Noise
Reduction for true MTS
reproduction. 
® -TV Noise
Reduction is required for good
stereo separation and audio
fidelity. 
® is a registered
trademark, and is licensed by ®
Technology Licensing.
IMPORTANT NOTE: This stereo system is designed for TV viewing only. Recording
and playback will always be in monaural.
DISPLAY
AUDIO
POWER
MUTE
VOL
UP/DOWN
100 KEY
NITERAPID
TUNE
CH 
NUMBER
Keys
For Model PV-C2062 only
LSQT0582A_P10-21.p6512/14/2001, 2:04 PM 15 
						

							16For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
1
ON-TIMER with Alarm
TV Timer  Features
Ready Check List
The clock is set to correct time.This unit can be set to automatically power on in one of 2
modes (TV, Playback, or FM radio).
You can also combine the On-Timer with a one minute
alarm that gradually increases in volume.
If no button on the remote or unit
(including a button used to turn off
the alarm) is pressed within 60
minutes after unit turns itself on,
it will turn itself back off.
Press PROG* to display SET PROGRAM
screen.
Note
2
3
1)Press  to select
desired settings.
2)Press 
 to set the
ON-TIMER TIME or
ON-TIMER mode.
 Make sure a tape is
inserted if Playback
mode  is selected.
 See 
“FM Radio” on page
20 for instructions on
how to preset FM stations.
 ON-TIMER mode
selection order
4
Press  to select
ALARM “ON” or
“OFF.”
When “ON” is selected,
an alarm will gradually increase in volume for one
minute or until canceled by pressing any button
(including VOL + -).
To Make Corrections,
use 
 and   to move back and correct.
5
Press PROG to set ON TIMER.
 “ON TIMER SET” is displayed.
 ON TIMER Indicator lights on the unit.
To Cancel ON-TIMER set,Repeat steps 1 and 2. Then, press ADD/DLT to
clear the time in step 3. Now, press PROG to end.
“ON TIMER END”  briefly appears on-screen.
ON TIMER
indicatorCH 
TIMER
1)Press  to select
“ON TIMER.”
2)Press 
 to display
ON TIMER screen.
SET          :  SET SELECT  :            
END          :  T I MER
SET  T I MER
ON   TON   T I MERMERS LEEP     T I MER : 00
ON  T I MER
SESELE CT    HOUOUR
6:--:--AM    CH AM    CH ----
SET          :        SELECT  :                                                                                 END          : PROG    
ALARM : ON
ON  T I MER
SESELE CT    ALARMALARM
6:0000AMAM        CHCH0808
SET          :                SELECT  :                                                                                  END          : PROG     
ALARM : ON
CANCEL  : ADD / DLT         
ABC
                                
VIDEO IN AUDIO INPOWER VOL CHSTOP/EJECT REW/
PLAY/REPEATFF/ REC TIMER/FMACTIONR E C ON TIMERVIDEO IN AUDIO INPOWER VOL CHSTOP/EJECT REW/
PLAY/REPEATFF/ REC TIMER/FMACTIONR E C ON TIMERPROG TIMERPROG TIMERCH01
CH125CH02CH03
FM1 FM9 FM8PLAY
LSQT0582A_P10-21.p6512/14/2001, 2:04 PM 16 
						

							17
TV Operation
Press SLEEP repeatedly
to set SLEEP TIMER.
Pressing DISPLAY with
sleep timer set displays
remaining time.
Press SLEEP repeatedly
until “SLEEP TIMER 00”
appears to cancel.
Sleep Timer
This unit can be set for auto power off.
ck List
correct time.
SLEEP TIMER 30
SLEEP TIMER 60
SLEEP TIMER 90
SLEEP TIMER 00
Instant Alarm
You can set a timer alarm up to 60 min. Useful when you are
cooking, etc.
1
2
3
To cancel, press TIMER/FM then press ADD/DLT on
the remote while CANCEL/SET screen is displayed.
To increase timer in progress, repeat step 2. Time
will be rounded up to next 1, 5, or 10 minute interval.
(See chart left.)

 If current time remaining is 12:15, countdown will
restart from 15:00.
 If current time remaining is 9:15, countdown will
restart from 10:00.
Press CH  on theunit with CANCEL/SET
screen displayed to set
alarm. 
(Time changes in
the order shown left.)
Alarm will sound at 0: 00.
Press any button to stop
 The volume of the alarm gradually increases
for one minute and then continues to beep
until  any button is pressed.
 Pressing TIMER/FM repeatedly on the unit
will change display as follows.
Press TIMER/FM on the unit to display the
instant alarm CANCEL/SET screen.
5 : 20PM
CANCEL :  ADD
 / DLT             02 : 00SET : CH          KEY  ON  UN I T
 While timer function is in progress,
you can change channels on the unit
with CH 
 while “CANCEL/SET”
screen is not displayed.
Note
1:00 (one minute)
2:00
3:00
9:00
10:00
15:00
20:00
25:00
30:00
40:00
50:00
60:00 (Max)
one-minute
increase
until 10:00
five-minute
increase
until 30:00
ten-minute
increase
until 60:00
Remaining Time
SELECT/SET :CH UP :CH DOWN
 :VOL UP
 :VOL DOWN
DISPLAY
SLEEP ADD/DLTPROG
FM
FM
*Important: If a remote control button does not work when pressed, press the COMBO button
on the remote and try the button again.
Model PV-C2062 remote shown.
LSQT0582A_P10-21.p6512/14/2001, 2:04 PM 17 
						

							18For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
OFFCAP  C1
TEXT  C1CAP  C2TEXT  C2
M A I N  MENU
T VVCR
EX I T
CLOCKC H
LANGUAGE
SET          : ACT I ON SELECT  :                              
Closed Caption Mode Feature
1
2
3
4
5
Closed Caption System
Closed Caption is ...This multi-use system not only allows the hearing impaired to enjoy selected programs,
but also makes useful information from TV stations available to everyone.
Press ACTION*
to display MAIN MENU.
1)Press 
  to
select “TV.”
2)Press ACTION to
display SET UP
TV screen.
1)Press 
 to
select “CAPTION”.
2)Press  to display
CAPTION screen.
Press ACTION three times to return
to the normal screen.1)Press 
 to
select CAPTION
MODE.
2)Press 
repeatedly to
select mode.
(See left.)
CAPT I ONCACAPTPT I ON  MODEMODE      :          :    CAP   C1CAP   C1CC  ON  MUTE          :   CAP   C1  
SET          : SET   SELECT  :                                                  
END          : ACT I ON   
Closed Caption Mode
Selections
Caption Mode: CAP C1 or C2
A narration of selected TV
programs is displayed.
Check TV program listings for
CC(Closed Caption)
broadcasts.
Caption Mode: TEXT C1 or
C2
The lower half of the screen
will be blocked out. When the
TV station broadcasts
information, such as program
listings, it will appear in this
space.
Caption Mode: OFF
Closed Caption / Text narration
will not be displayed.
NOTE :
The closed caption or text
signal may be broadcast over
C1, C2, or both. Also, text
contents can vary so you may
wish to try different settings.
Recording and Playing Back a Closed Caption/Text Program
Record:Record normally.
Closed Caption/ Text signal, if present, is recorded automatically.
Playback:Start playback. Do above steps to select desired caption mode.
LOCK
CACAPTPT I ON N  I NPUT   SELECT         : TUNERV I DEO  ADJUST
FM ANTENNA            : EXT
SELECT :          SET       :      
END       : ACT I ON      
          SET  UP  TV  
LSQT0582A_P10-21.p6512/14/2001, 2:04 PM 18 
						

							19
TV Operation
1
2
4
6
5
3
7
Press ACTION three times to return to
the normal screen.
NOCAP C1
CAP C2
M A I N  MENU
T VVCR
EX I T
CLOCKC H
LANGUAGE
SET          : ACT I ON SELECT  :                              
Caption On Mute Feature
Closed Caption narration, if available, is displayed
when MUTE button is pressed for silence.
Press ACTION to display MAIN MENU.
1)Press 
  to
select “TV.”
2)Press ACTION to
display SET UP TV
screen.
1)Press 
 to
select “CAPTION”.
2)Press 
 to display
CAPTION screen.
1)Press 
 to
select CAPTION
MODE.
2)Press 
repeatedly to
select  “OFF.”
1)Press 
 to select
CC ON MUTE.
2)Press  repeatedly
to select desired
mode.
 Each press of  will
change the display as
shown left.
 The caption may be
broadcast over CAP C1
or C2.
Press MUTE to mute the sound and
display closed captioning.
 To cancel, press MUTE again.
CAPT I ONCACAPTPT I ON  MODEMODE      :          :    OFFOFFCC  ON  MUTE          :   CAP   C1  
SET          : SET      SELECT  :                                                  
END          : ACT I ON 
LOCK
CACAPTPT I ON N  I NPUT   SELECT         : TUNERV I DEO  ADJUST
FM ANTENNA            : EXT
SELECT :          SET       :      
END       : ACT I ON      
          SET  UP  TV  
SELECT/SET :CH UP :CH DOWN :VOL UP
 :VOL DOWN MUTE
ACTION
*Important: If a remote control button does not work when pressed, press the COMBO button
on the remote and try the button again.
Model PV-C2062 remote shown.
LSQT0582A_P10-21.p6512/14/2001, 2:04 PM 19 
						

							20For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
FM Radio
2
Press a number
key (1~9) to
select the FM
number.
1
To Make Corrections,
select station with a number key, then do
step 3 again.
To exit FM mode,
press FM/TV on the remote or TIMER/FM
twice on the unit.
1)Press CH 
to select the
desired radio
station. 
(Each
press changes
frequency 200
KHz.)
2)Press ADD/
DLT to set the
radio station.
Hold down CH or  for a few
seconds, then
release to quickly
scan for FM
stations in your
area.
 To cancel, press
CH  or  while
in search mode.
3
FM Radio Setup
3
4
1)Press  to
select FM
ANTENNA.
2)Press 
 to
select “INT
(INTERNAL)”
or “EXT
(EXTERNAL)”
whichever
sounds the best.
Press FM/TV* on the remote or
press TIMER/FM twice on the unit
to display FM radio mode.
FM Radio is ... This unit has an FM radio with built-in antenna, 9 station preset, and a band range
of 87.5 ~ 108.1 MHz. You can even set the On-Timer (page 16) to wake up to your favorite radio station.
FM ANTENNA Setup
1
2
Make sure FM tuning is done
correctly (see FM Radio Setup).
Press ACTION  to display MAIN MENU.
1)Press 
 to select “TV.”
2)Press ACTION to
display SET UP TV
screen.
Press ACTION twice to end setup.FM  1     87.  5MHz
1 2 : 0 0PM
FM  1     8 7. 7MHz
MEMORY : PUSH   ADD / DLT  KEY
1 2 : 0 0PM
FM  1     8 7. 7MHz
MEMOR I ZED
1 2 : 0 0PM
M A I N  MENU
T VVCR
EX I T
CLOCKC H
LANGUAGE
SET          : ACT I ON SELECT  :                              
LOCK
CAPT I ON  
V I DEO  ADJUST
FM    ANTENNA             :  I NTNTSELECT :          SET       :      
END       : ACT I ON      
              SET  UP  TV   
21
To cancel, press FM/TV on the remote or
TIMER/FM twice on the unit.Press a Number
key (1~9) to select
a preset FM
number (see steps
2 and 3 on this
page).
FM  1     87.  5MHz
1 2 : 0 0PM
Press FM/TV on the remote or press
TIMER/FM twice on the unit to display FM
radio mode.
Notes
 FM radio cannot be recorded on a Video
cassette.
 You may get better reception by repositioning
the unit.
 You cannot select FM Radio mode during
playback or record, or while a blue back screen
(PROG, ACTION, MENU) is displayed.
 Once stations are set, the selected station and
current time are displayed when FM Radio
mode is entered. To remove time, press
DISPLAY. If DISPLAY is pressed again, the unit
status screen appears.
How to use the FM radio
Note
*Important: If a remote control button does not work when pressed,
press the COMBO button on the remote and try the button again.

 

 


For cable TV users
=> “INT”

 

 


For antenna users
=> “EXT”
To select Audio Mode for  FM Radio
Press AUDIO
repeatedly to select
“STEREO” or “MONO”
in FM Radio mode.
STEREOMONOFM  1     8 7. 7MHz
1 2 : 0 0PMPress AUDIO
repeatedly to select
“STEREO” or “MONO”
in FM Radio mode.
LSQT0582A_P10-21.p6512/14/2001, 2:04 PM 20