Panasonic Combination Vcr Pv C2062 Operating Instructions

21
TV Operation
Picture Adjustment
AUDIOdly to selectEO” or “MONO”Radio mode.
ACTION
Picture Adjustment

 

 


COLOR ControlAdjust color intensity.

 

 


TINT ControlAdjust for natural flesh tones.

 

 


BRIGHTNESS ControlAdjust picture brightness.

   
  
   
  

  PICTURE ControlAdjust picture intensity by
adjusting both contrast and
color level in the proper
balance.

  
 
  
 

  SHARPNESS ControlAdjust picture sharpness.
1
Press ACTION to display MAIN MENU.
1)Press   to
select “TV.”
2)Press...

22For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
VIDEO IN AUDIO INPOWER VOL CHSTOP/EJECT REW/
PLAY/REPEATFF/ REC TIMER/FMACTIONREC ON TIMERVIDEO IN AUDIO INPOWER VOL CHSTOP/EJECT REW/
PLAY/REPEATFF/ REC TIMER/FMACTIONR E C ON TIMERPROG TIMERPROG TIMER
Press PROG  (or
ACTION) to end the
program.
To Enter More Programs,
press  to select
and  to set a blank
program number, and
then repeat step 3.
4
CANCEL : ADD / DLT   SELECT   1 - 8 :          ENTER...

Timer Operation
23
Repeat steps 1 and 2 on page 22.1
CANCEL : ADD / DLT   SELECT   1 - 8 :          ENTER   :      END       : PROG / ACT I ON      
P  DT  START    STOP    CH  SPD1   day  day    9    9 : 0000p 1212 : 0000a    0808       SP  SP2     8  10 : 00a 12 : 00p 125    SP3   10    8 : 00p  9 : 00p  10    SP4   SU    9 : 00p 10 : 00p     L    LP
8    SAT SAT  9:0000P  P  1212: 0000A 0808TODAY
----------------------------------------------
DATE       START       STOP       CH
ABC  SP
SESELE CT...

24For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Search System is ...Each time a recording is made, an invisible index mark is placed on the tape.
When timer recordings are made, program index and information are also included.
These index marks can be used to access or scan recordings.
Tape Operation
Program End Search
1
SEARCH  START : FF
EX
 I T    :   SEARCH   
PROGRAM END SEARCH
Example of Program End Search operation.
Fig.1
Fig.2
Fig.3If search...

Advanced Operation
25
Auto Operation Functions
Tape Position Display
Press TAPE POSITION to detect
current tape position.
1
DETECT I NG  TAPE  POS I T I ON
2

 

 


Auto Shut Off
No broadcast signal in TV (Only when
Weak Signal Display is set to OFF),
blank tape is Played for 5 minutes
=> Power turns off
 This feature is canceled if any button is
pressed during above mode.

 

 


Auto Playback
Insert a tape in Power off mode
=> Power turns on
 Playback begins if tape has no record tab.

 

 


Auto...

26For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Tape Operation (continued)
Repeat Play
Set to see a recording over and over.
1
2
1)Press  to
select
“REPEAT
PLAY.”
2)Press 
 to
set REPEAT
PLAY “ON” or
“OFF.”
3
M A I N  MENU
T VVCR
EX I T
CLOCKC H
LANGUAGE
SET          : ACT I ON   SELECT  :                               
1)Press  
to select “VCR.”
2)Press
ACTION to
display SET
UP VCR
screen. Press ACTION to display
MAIN MENU.
4
Press ACTION twice
to...

Advanced Operation
27
Special VCR  Features
When “ON” is selected, the picture is displayed even
when a broadcast signal is weak or non-existent.
ANTENNA  :   CABLE
AUTO   SETCHANNEL  CAPT I ONWEAK  SEAK  S I GNAL   GNAL   D I SPLAYSPLAY : OFFOFF
SELECT :          SET       :      
END       : ACT I ON   
           SET  UP  CHANNEL 
M A I N  MENU
CLOCKC H
SET          : ACT I ON  SELECT  :                             
VCRT V
EX I TLANGUAGE
Weak Signal Display ON/OFF
1
2
3
 “ON” = Picture is displayed...

28For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Special VCR  Features (continued)
1
2
Press ACTION* to display MAIN MENU.
Channel Caption
1)Press  to select “CH.”
2)Press ACTION
to display SET
UP CHANNEL
screen.
3
1)Press  to
select CHANNEL
CAPTION.
2)Press 
 to
display  screen.
4
5
Press ACTION four times to end setup.
1)Press  to
select a station.
2)Press 
 to
move cursor to
the right.
3)Press 
 to
select channel
number.
4)Press 
 to set
preset...

Advanced Operation
29
V-Chip Control Feature
Press ACTION to display MAIN MENU.
Enter Secret Code
V-Chip Control Feature is...This unit has a built-in V-Chip Control which allows
you to block unwanted TV usage based on US
MOVIES and US TV PROGRAMS Ratings.
A 4-digit code must be entered to view a blocked program or
change rating settings.
1
 DO NOT forget your secret code.
 Once ratings are set, restricted tapes
or programs cannot be accessed
unless the secret code is entered.
Changing your secret...

30For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Enter Code
1
1)Press * to
select US
MOVIES.
2)Press 
 to set
“ON” or “OFF.” If LOCK menu is not displayed, do
“Enter Secret Code” steps on page 29.

“ON” => V-Chip Control is activated.

“OFF” => V-Chip Control is deactivated.
Setup US MOVIES Ratings
Note
 “NEXT PAGE” displays CANADIAN V-Chip
setting menu. Not necessary except when
viewing Canadian tapes or broadcasts.
1
1)Press  to
select US TV...