Panasonic Colorvideo Projection System Pt 47wx49 Operating Instructions

							10
INSTALLATION
Optional Equipment Connections (Cont.)
Amplifier Connection (TO AUDIO AMP)
To listen through a separate stereo system, connect an external audio amplifier TO AUDIO AMP
outputs on back of television.
Note:TO AUDIO AMP terminals cannot be connected directly to external speakers.
Audio Adjustments
1. Select SPEAKERS ON located in the on screen AUDIO menu . 
2. Set amplifier volume to minimum.
3. Adjust PTV volume to desired level.
4. Adjust amplifier volume to match the PTV.
5. Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO menu to control
speakers from the PTV or select FIXED AUDIO OUT to control speakers from the
external amplifier. 
6. Volume, mute, bass, treble and balance are now controlled from the PTV, if you select
VARIABLE AUDIO OUT mode.
Program Out Connection (PROG. OUT)
To use the PTV audio and video with optional video equipment, use PROG. OUT and TO
AUDIO AMP terminals on the back of the PTV.
 Procedure
1. Connect optional video equipment to PROG. OUT video and TO AUDIO AMP R/L
Audio terminals.
2. PROG  OUT terminal display is the same as the on screen display.
3. See optional equipment manual for further instructions for recording or monitoring.
CONNECTIONS ON BACK OF THE PTVCABLES NOT SUPPLIED
S-
VIDEO
VIDEO
AUDIO
L
R VIDEO
Y
P
B
PR
PROG 
OUTTO 
         AMPL
RINPUT 
1INPUT 
2INPUT 
3 COMPONENT ANT 1
ANT 2 SPLIT OUT
CENTER 12   50 WATTS (DIN) MAX.

12 CHANNEL 
INPUT
AUDIO
   VIDEO INPUTS
EXTERNAL AMPLIFIER
CONNECTIONS ON BACK OF THE PTV
CABLES NOT SUPPLIED
VCR
OR MONITOR
S-
VIDEO
VIDEO
AUDIO
L
R VIDEO
Y
P
B
PR
PROG 
OUTTO 
         AMPL
RINPUT 
1INPUT 
2INPUT 
3 COMPONENT ANT 1
ANT 2 SPLIT OUT
CENTER 12   50 WATTS (DIN) MAX.

12 CHANNEL 
INPUT
AUDIO
   VIDEO INPUTS 
						

							11
INSTALLATION
Dolby Center Channel Input Connection
Your PTV can be configured to use the PTV speakers as center channel speakers in 
Dolby* surround sound transmission.  Connect a Dolby surround amplifier to CENTER 
CHANNEL INPUT on the back of the PTV as shown.  DOLBY CENTER MODE & FIXED 
AUDIO OUT must be selected in the AUDIO Roller Guide
™** menu under SPEAKERS. 
COMPONENT VI DEO I NPUT
PRPBY
VI DEO RLAUDI O
RL
TO AUDI O AMP
ANT 2
SPLI T
OUT
ANT 1
CENTER CHANNEL I NPUT
12 Ohms 50W (DIN) MAX
2 1
INPUT 1 S- VI DEO VI DEO
PROG.
OUT R- AUDI O- L
INPUT 2
INPUT 3
PTV
  From Center     
Channel Output
TERMINALS ON BACK OF PTV
        Dolby Surround 
AMPLIFIER
CENTER CHANNEL INPUT
(1) Push and hold down button. 
(2) Insert bare wire into terminal 
      and release button.
VCR
Video Component
  PTV Speakers 
Center ChannelRight Front  
Speaker Left Front 
Speaker
      Left Rear 
Surround Speaker    Right Rear 
Surround Speaker
S-
VIDEO
VIDEO
AUDIO
L
R VIDEO
Y
P
B
PR
PROG 
OUTTO 
         AMPL
RINPUT 
1INPUT 
2INPUT 
3 COMPONENT ANT 1
ANT 2 SPLIT OUT
CENTER 12   50 WATTS (DIN) MAX.

12 CHANNEL 
INPUT
AUDIO
   VIDEO INPUTS
PTV
  From Center     
Channel Output
        Dolby Surround 
AMPLIFIER
CENTER CHANNEL INPUT
(1) Push and hold down button. 
(2) Insert bare wire into terminal 
      and release button.
VCR
CONNECTIONS ON BACK OF THE PTV
  PTV Speakers 
Center ChannelRight Front  
Speaker Left Front 
Speaker
      Left Rear 
Surround Speaker    Right Rear 
Surround Speaker
Video Component
*”Dolby” and “Pro-logic” are the trademarks of Dolby Laboratories Licensing Corporation.
**U.S. Patent Pending 
						

							12
SPLIT SCREEN OPERATION
SPLIT Screen Operation
This feature lets you watch two different channels side-by-side with or without an external video
source. The audio is from the Main picture only (left side). 
   
Basic SPLIT Screen Operation
Procedure
1. Press the SPLIT button on the remote control to display the SPLIT screen.
2. Choose channels for the SPLIT picture by pressing the remote control SPLIT CH 
up/down buttons.
3. Choose channels for the Main Picture by pressing the remote control CH up/down
buttons or by using the numeric keypad.
Note:Press the TV/VIDEO button to select desired input mode for the Split picture.
4. While in split screen mode, press the ASPECT button to select one of three modes:
• NORMAL - Normal Split mode shows two normal pictures side-by-side. 
• P OUT P (Picture-Outside-Picture) - Small picture Outside of main picture. 
• FULL - Main and split picture are stretched vertically.
Note:The procedure for selecting channels for Picture-Outside-Picture and FULL mode is the same as
in Normal mode. 
   
5. Press the SWAP button to switch the left picture with the right picture source. 
6. Press RECALL button for on-screen left-and-right picture source status.
7. Press the ASPECT button to return to normal picture.
       Main          SPLIT 
        Main         P OUT P 
Picture-Outside-Picture 
        Main FULL  SPLIT FULL        
Full 
 
Normal Split Mode 
        Main          SPLIT  
						

							13
SPLIT SCREEN OPERATION
SPLIT Screen Operation with a Cable Box
Procedure

To view premium (scrambled) cable channels through your cable box in the Main Picture:
Note:Use this procedure if you want to watch premium cable channels in the Main Picture while
viewing a television program or video in the SPLIT frame. 
1. Connect cable box to ANT2.
2. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
3. Tune television to Channel 3.
4. Press the SPLIT button on the remote control to display the SPLIT on-screen.
Note:The audio is from the Main Picture only (left side).
5. Verify the cable box is ON.
6. Choose channels for the Main Picture by tuning the cable box. 
7. Choose channels for the SPLIT frame by pressing the TV button on the remote control
and using the SPLIT CH up/down buttons.
Note:SWAP is not available when using the cable box to tune channels. If your cable box has a video
output, it can be connected to the television to allow you to use all SPLIT functions.  See the
equipment manual for more information. (Press the TV/VIDEO button to select the video input
connected to the cable box). 
						

							14
DIGITAL TV - SET-TOP BOX (DTV-STB) OR DVD CONNECTION
Digital TV - Set-Top Box (DTV-STB) or DVD Connection
This television is capable of displaying 1080i and 480p DTV signals when connected
to a DTV Tuner set-top-box (STB). In order to view DTV programming, the STB must
be connected to the component video inputs (Y, P
B, PR) of the television. A DTV
signal must be available in your area. Select the output of the STB to either 1080i or
480p.
This television also utilizes a progressive scan doubler, which de-interlaces the NTSC
signal and progressively scans the image providing a clear, crisp picture without
visible scan lines.
Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) or DVD
to the back of your PTV.
Note:There are 2 sets of three video inputs, Y, PB, and PR.  Separate component color
inputs provide luminance and color separation.  Use the L (left) and R (right) audio
inputs.
S-
VIDEO
VIDEO
AUDIO
L
R VIDEO
Y
P
B
PR
PROG 
OUTTO 
         AMPL
RINPUT 
1INPUT 
2INPUT 
3 COMPONENT ANT 1
ANT 2 SPLIT OUT
CENTER 12   50 WATTS (DIN) MAX.

12 CHANNEL 
INPUT
AUDIO
   VIDEO INPUTS
DIGITAL  TV OUTPUT
PRPBYMAIN 
VIDEO
NTSC  OUTPUT
R-AUDIO-L
S-VIDEOL-AUDIO-R
-VIDEO
COMPONENT INPUT TERMINALS ON BACK OF THE PTV TERMINALS ON BACK OF DTV-STB OR DVD PLAYER
CABLES NOT SUPPLIED 
						

							15
ROLLER GUIDE MENU NAVIGATION
Roller Guide Menu Navigation
Procedure
1. Press the ACTION button  on the Remote Control to display the Roller Guide Menu.  
2. Press the CH up/down to rotate the Roller Guide to the desired feature.
3. Press the ACTION button to display main menus and submenus.  
4. Press the CH up/down buttons to highlight desired main menu feature. 
5. Press the VOL right button to enter submenus.
6. Press the CH up/down buttons to highlight desired submenu feature.
7. Press the VOL right/left button to select or adjust feature.
8. Press the ACTION button twice to return to the Roller Guide Menu. 
9. To exit the Roller Guide Menu, press the  VOL left button.
                  
Remote Control Guide
The Remote Control Quick Reference Guide is located within the package provided
with this PTV.
Front Control Buttons
ROLLER GUIDE MENU SELECTIONS
Remote ACTION / Navigation Button


 
VOL VOLCH
CH ACTION
POWERVOLUMECHANNELACTION TV/VIDEO
ON/OFF INDICATOR 
						

							16
ROLLER GUIDE FEATURE CHART
Roller Guide Feature Chart
MENUDESCRIPTION
SET UP
LANGUAGES
Select English, Spanish, or French menu.
PROG. CHAN
(Program Channels)
MODE - Select Cable or TV. See Installation
section in manual.

ANTENNA  -  Select ANT 1 or ANT 2.

AUTO PROGRAM - Automatically program
channels having a signal into memory. 

MANUAL PROGRAM - Manually add or delete
channels from memory. 
(Closed Captioning)
CC ON MUTE -  Activate C1-C4 for Closed
Captioning display when the remote MUTE button
is pressed. 

CC MODE - Select T1-T4 or C1-C4 for Closed
Captioning, program guides and other information.
OTHER ADJ.
AUTO POWER ON - Select SET to power up the
TV at the same time as the Cable Box or other
components or select OFF.

CONVERGENCE 1 - Adjustment may be required
when the PTV is moved because of the effects of
the Earth’s magnetic field on the projection tubes.

CONVERGENCE 2 - Adjustment may be required
after setting Convergence 1. 
 AUDIO
AUDIO ADJ.
 (Adjustments)
MODE - Select STEREO, SAP (Second Audio
Program) or MONO. (Use MONO when stereo
signal is weak.)
Note:STEREO, SAP or MONO can also be
selected by pressing the SAP button on the
Remote Control.

BASS - Increase or decrease the bass response.

TREBLE - Increase or decrease the treble
response.

BALANCE - Emphasize the left/right speaker
volume.

NORMAL - Reset BASS, TREBLE and BALANCE
to factory default.
CC 
						

							17
ROLLER GUIDE FEATURE CHART
OTHER ADJ. 
(Adjustments)

AI SOUND -  Automatically adjust volume to
maintain a comfortable listening level.  (AI
sound is not available in VIDEO mode).

BBE - Sound technology enhances speech
intelligibility and restores the dynamic range
of musical passages to provide outstanding
natural sound.
Note:BBE can also be switched ON/OFF by
pressing the BBE button on the Remote
Control.
 SURROUND
MODE - Enhances audio response when
listening to stereo.
 SPEAKERS

ON - PTV speakers operate normally.

OFF & VARIABLE AUDIO OUT - 
PTV speakers off - audio adjustable by PTV.

OFF & FIXED AUDIO OUT - 
PTV speakers off — audio adjustable only by
the external amplifier.

DOLBY CENTER MODE & FIXED AUDIO
OUT - PTV speakers provide center speakers
for Dolby sound transmission available on
video or laser disc. (See Installation section in
manual.)
TIMER
CLOCK SET

Set the time and the day of the week.  (Time
will display onscreen after turning on the
television, pressing the RECALL button or
changing channels).
SLEEP
Set timer to turn off PTV in 30, 60 or
90 minutes.  Select NO to turn timer off.
TIMER 1
TIMER 2
Set one or both timers to automatically turn
television on and off at selected times, on
selected channels, and on selected days.
(Clock must be set to use Timer features).
PICTURE
VIDEO ADJ1
(Adjustments)
COLOR - Adjust desired color intensity.

TINT - Adjust natural flesh tones.

BRIGHTNESS - Adjust dark areas for crisp detail.

PICTURE - Adjust white areas of picture.

SHARPNESS - Adjust clarity of outline detail.

NORMAL- Reset all picture adjustments to factory
default settings.
Roller Guide Feature Chart (Cont.)
MENUDESCRIPTION 
						

							18
ROLLER GUIDE FEATURE CHART
VIDEO ADJ2
(Adjustments)
COLOR TEMP NORMAL - Adjust white balance to
COOL (blue), WARM (red) or NORMAL.

NATURAL COLOR - Expands the color
reproduction range resulting in vivid pictures with
natural color gradation and highly delicate hues.

VIDEO NR - Reduces noise in the channel,
commonly called snow.  Remains off when
receiving strong signal.

3D Y/C FILTER - Minimize noise and cross color in
the picture.
OTHER ADJ
(Adjustments)
SCAN MODE - Select TV and clarity. Select GAME
(line doubling) to optimize picture when playing
complex, fast action video games. 

COLOR MATRIX - Select HD or SD to
automatically adjust color parameters for HD (high
definition and SD (standard definition)
transmissions.

V - POSITION -  Press the ASPECT button on the
remote control to select Zoom mode, then adjust
the vertical position by pressing the VOL left or
right button.
Note:Refer to your Remote Guide under Special
Remote button for information on ASPECT
button.
CHANNELS
FAVO R I TE S
CHANNEL SCAN - Select FAV (16 favorites) or
ALL channels to scan channels using the up/down
CH buttons.
CAPTION
PRESET CAPTION - Enter channel numbers for
preset captions.

MANUAL CAPTION - Enter channel numbers and
captions manually.

INPUT LABEL - Label video connections for
onscreen display of optional equipment.
Note:This receiver has a video input skip feature,
which will allow the user to skip Input modes
when pressing TV/VIDEO button.  
LOCK
MODE
Lock All, Channels or Game with a secret code.
Note:For more information about Block Programs,
see the V-CHIP Parental Lock manual
provided with the TV package.
HOW LONG?
Select the period of time (12, 24, 48 hours or
ALWAYS) for your option to be locked.
Roller Guide Feature Chart (Cont.)
MENUDESCRIPTION 
						

							19
SPECIAL FEATURES
Special Features
SET UP
Prog Chan (Program Channels)
In SET UP menu under PROG CHAN select:

MODE to select TV (antenna) or CABLE mode depending on the signal source.

ANTENNA to select either ANT1 or ANT2. 

AUTO PROGRAM to automatically program all channels with a signal.

MANUAL PROGRAM to manually add or delete channels.    
  (Closed Captioning)
This television contains a built-in decoder that displays   (Closed Captioned) text across the
screen (white or colored letters on black background).  It allows the viewer to read the dialogue of a
television program or other information. The program viewed must include Close Captioning for the
feature to work.    
 Mode

In SET UP Menu, select   (Closed Caption).

Select  MODE.

Select OFF, C1, C2, T1, T2, C3, C4, T3 or T4:
• OFF - When Closed Caption is not desired.
• C1 - For video related information to be displayed, up to 4 lines onscreen at a time. (It
does not block relevant parts of the picture).  Text may be in any language.
• C2 to C4 - For other modes of video related information.
• T1 - For program guide and other information to be displayed, when available.
(Blocks a large portion of the picture on the television screen).
• T2 to T4 - For other modes of information.  (Blocks a large portion of the picture on the
television screen).

Press ACTION to return to submenu options, and exit menus.
 On Mute
Activates the onscreen Closed Caption feature when the MUTE button on the remote control is
pressed.              
Note:This feature only functions when the Closed Caption Mode is OFF. The program being
viewed must be broadcast with Closed Captioning. (Refer to your local TV guide). 

In SET UP Menu, select   (Closed Caption).

Select NO, C1, C2, C3, or C4.

Recommended set up for Closed Caption when using the MUTE button:
• ON MUTE: C1
• MODE: OFF

Press ACTION to return to submenu options,  and exit menus.
MODE             CABLE
ANTENNA ANT1
AUTO PROGRAM
MANUAL PROGRAM
   
IDIOMA/     
LANGUE    
PROG CHAN
CC
OTHER ADJ.
CC
CC
CC
CC
CC
CC
CC
CC
CC