Panasonic Color Television Ct 32fsx32 Operating Instructions

							OPTIONAL EQUIPMENT CONNECTIONS
9 l
Digital TV - Set-Top Box (DTV-STB) or DVD Player Connection
Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) to the back of your TV.
 
Notes:
rThere are three video inputs, Y, PB, and PR.  Separate component colour inputs provide luminance and color separation.  Use the L
(left) and R (right) audio inputs.
rSelect DTV-STB to 480i output mode. TV set can receive 480i signal only.
 TERMINALS ON BACK OF DTV-STB OR DVD PLAYER
DIGITAL  TV OUTPUT
PRPBYMAIN 
VIDEO
NTSC  OUTPUT
R-AUDIO-L
S-VIDEO
R-AUDIO-L
-VIDEO
 TERMINALS ON BACK OF TV CABLES NOT SUPPLIED
S-VIDEO
AUDIO VIDEO/Y
P
B
PR
PROG 
OUT
L COMPONENT
TO AUDIO AMP
   VIDEO INPUTS
RL
RL
R
INPUT 1 INPUT 2
VIDEO 
						

							10 l
OPTIONAL EQUIPMENT CONNECTIONS
Program Out Connection (PROG OUT) 
To use the television audio and video with optional equipment, connect the PROG OUT and TO AUDIO AMP connections on the back of
the television.
Notes:
• When a component input video signal is connected to Video 1 (Y, P
B,  PR ) terminals, and the TV main picture is Component, the Program
output video will be luminance signal (no color).
• When S-Video input signal is used for TV main picture, the Program output  video will be luminance signal (no color).
Procedure
1. Connect optional equipment to PROG OUT and TO AUDIO AMP terminals.
2. PROG OUT terminal display is the same as onscreen display.
3. See optional equipment manual for further instructions for recording and monitoring.
Amplifier Connection (To Audio Amp)
Connect to an external audio amplifier input for listening to a stereo system.
Note:TO AUDIO AMP terminals cannot be connected directly to external speakers.
Audio Adjustments
1. Select TV SPEAKERS ON from AUDIO menu. 
2. Set amplifier volume to minimum.
3. Adjust TV volume to desired level.
4. Adjust amplifier volume to match the TV.
5. Select TV SPEAKERS OFF&VAO from AUDIO menu. 
6. Volume, mute, bass, treble and balance are now controlled from the TV. 
Note:In OFF&FAO the volume is controlled by the external amplifier.      
CABLES NOT SUPPLIED CONNECTIONS ON BACK OF TV
VCR
OR MONITOR
S-VIDEO
AUDIO VIDEO/Y
P
B
PR
PROG 
OUT
L COMPONENT
TO AUDIO AMP  VIDEO INPUTS
RL
RL
R
INPUT 1 INPUT 2
VIDEO
CABLES NOT SUPPLIED  TERMINALS ON BACK OF TV
External Amplifier
S-VIDEO
AUDIO VIDEO/Y
P
B
PR
PROG 
OUT
L COMPONENT
TO AUDIO AMP
   VIDEO INPUTS
RL
RL
R
INPUT 1 INPUT 2
VIDEO 
						

							PIP FUNCTION BUTTONS
11 l
PIP Function Buttons
PIP (Picture-in-Picture) Button
Swap Button  
Size Button
PIP Channel Buttons
CH 2
 VIDEO 1
Main 
picture
with
Audio 
PIP Frame
PIP Video Source
or
PIP CH #Main Picture
ChannelrPress   to display PIP frame.
rPress   while PIP frame is displayed to select desired input
mode.
rPress   again to cancel the PIP feature.
Note:Audio is from Main Picture only
PIPFF
TV/VIDEO
PIPFF
CH 2
 VIDEO 1VIDEO 1CH 2
rPress   (when PIP frame is displayed) to interchange the main
picture with the picture in the PIP frame.
SWAPPAUSE
small PIP frame
rPress   (when PIP frame is displayed) to choose either the
large or small PIP frame.
SIZEPLAY
Main Picture
large PIP frame
CH #
Main PicturePIP framePIP channel
rPress the   while PIP frame is displayed to scan
through channels.qp
PIP CHVCR/DBS CH 
						

							12 l
PIP FUNCTION BUTTONS
PIP Function Buttons (contd.)
Move Button
Freeze Button
TV/VIDEO Button
 
Search Button 
 
rThe PIP frame may be placed at any corner of the Main Picture by pressing the   button.
Each time the MOVE button is pressed, the PIP frame will move counterclockwise as illustrated.
MOVEREW
Main 
Picture
PIP 
FramerPress   to stop action in the Main or PIP frame.
Note:
• Pressing FREEZE button when PIP frame is not displayed, will display a
snapshot image of the main picture in the PIP frame.
• Pressing FREEZE button when PIP frame is displayed, will freeze the
action in the PIP frame. Press the FREEZE button again to continue
action.
FREEZETV/VCR
PIP Frame
CH #
 VIDEO 1  VIDEO 2
 VIDEO 3
rPress   while PIP frame is displayed to
select desired input mode. 
TV/VIDEOCOMPONENT
or
Search Frame
rThis feature lets you scan through all available
channels.
rPress   to display search frames.
rPress   to stop search frame or press   to
delete search frame.  
SEARCHSTOP
PIPFFSEARCHSTOP
Main Picture 
						

							REMOTE CONTROL OPERATION
13 l
Remote Control Operation
               POWER
Press to turn ON and OFF.
POWER
MUTE
 
Press to mute sound. Press to display and
cancel CC (Closed Caption)..
SAP
 
Press to acces second audio program.
TV/VIDEO
 
Press to select TV, Video or Component 
mode for Main Picture or PIP frame.
Press to select remote operation.
 
 TV 
VC
RDBS
/C
BL D
VD
ACTION
Press to access menus.
Press to select next or previous channel and 
navigate in menus.
CH
CH
Press to adjust TV sound and navigate in 
menus.
VOL  VOL
EXIT
DBS functions button.
GUIDE
DBS functions button.
MOVE
REWSIZE
 PLAYPIP
FF
SWAP
PAUSESEARCH
STOPREC
FREEZE
TV/VCR PIP CH
VCR /DBS CH
Component function buttons
u
Press numeric keypad to select any channel.
7
4
12
5
8
0
9
6
3
R-TUNE
Press to switch to previously viewed 
channel or video mode.
EUR7613Z30
Battery Installation
Use two AA batteries:
Remove battery cover by pushing in and up near arrow.
Install batteries matching (+) and (-) polarity signs.
Replace the battery cover.
Note:Incorrect installation can cause battery leakage and
corrosion that will damage the Remote Control
Precautions
• Replace batteries in pairs.
• Do not mix battery types (zinc carbon
with alkaline).
• Do not recharge, heat, short-circuit,
disassemble, or burn batteries.
PROG
Press to enter minor number in a compound 
number.
RECALL
Press to display time, channel, sleep timer, 
and other options.
MENU
 
Press to access DBS or DVD menus. 
						

							14 l
REMOTE CONTROL OPERATION
Mode Operational Key Chart
This chart defines the  keys that are opereational in the selected component modes (TV, VCR, DBS, CABLE or DVD) after
programming (if needed).  
  
KEY NAME TV  MODECABLE MODEDBS MODE
POWER   POWER POWER POWER
SAPSAP ON/OFF--
MUTE    MUTETV MUTETV MUTE
TV/VIDEO INPUT SWITCHTV INPUT SWITCHTV INPUT SWITCH
MENU --DBS MENU
CHAN  UP CHANNEL UPCABLE CHANNEL UPDBS NAVIGATION UP
CHAN  DOWN CHANNEL DOWNCABLE CHANNEL DOWNDBS NAVIGATION DOWN
VOL RIGHT VOL +TV VOL +DBS NAVIGATION RIGHT
VOL LEFT VOL -  TV VOL -DBS NAVIGATION LEFT
ACTION ACTION-DBS MENU
RECALL DISPLAYTV DISPLAYDBS PROG. INFO
EXIT--DBS EXIT
GUIDE--DBS GUIDE
PROG--DBS
1 DIGIT 1DIGIT 1DIGIT 1
2 DIGIT 2DIGIT 2DIGIT 2
3 DIGIT 3DIGIT 3DIGIT 3
4 DIGIT 4DIGIT 4DIGIT 4
5 DIGIT 5DIGIT 5DIGIT 5
6 DIGIT 6DIGIT 6DIGIT 6
7 DIGIT 7DIGIT 7DIGIT 7
8 DIGIT 8DIGIT 8DIGIT 8
9 DIGIT 9DIGIT 9DIGIT 9
0 DIGIT 0DIGIT 0DIGIT 0
R-TUNEPREVIOUS CHAN 
OR VIDEO MODECABLE PREVIOUS 
CHANNELPREVIOUS DBS CHANNEL
PROG--DBS PROGRAM
 MOVE
  TV PIP ON / OFF--
SWAP
PA U S ETV PIP SWAP--
SEARCH
STOPTV PIP SEARCH--
RECORDVCR RECORD--
FREEZE/TV/VCRTV PIP FREEZE--
 PIP CH
 VCR/DBS CH
       
TV PIP CHANNEL DOWN-DBS CHANNEL DOWN
  PIP CH
  VCR/DBS CH
       
TV PIP CHANNEL UP-DBS CHANNEL UP 
						

							REMOTE CONTROL OPERATION
15 l
Mode Operational Key Chart (contd.)
 
KEY NAME VCR MODEDVD MODE
POWER POWER POWER
SAP--
MUTETV MUTETV MUTE
MENU--
TV/VIDEOTV INPUT SWITCHTV INPUT SWITCH
CHAN  UP-NEXT CHAPTER
CHAN  DOWN - PREVIOUS CHAPTER
VOL RIGHT    TV VOLUME + NAVIGATION RIGHT
VOL LEFTTV VOLUME - NAVIGATION LEFT
ACTION--
RECALLONSCREEN VCR
DISPLAYDVD DISPLAY
EXIT--
GUIDE--
PROG--
1--
2--
3--
4--
5--
6--
7--
8--
9--
0--
R-TUNE--
    MOVE
>
SWAP
PAUSEVCR PAUSEDVD STILL
SEARCH
STOPVCR STOPDVD STOP
RECORDVCR RECORD-
FREEZE/TV/VCRTV/VCR SWITCHOPEN/CLOSE
PIP CH
VCR/DBS CH
 VCR CHANNEL 
DOWNSLOW -
 PIP CH
 VCR/DBS CH
 
VCR CHANNEL UPSLOW + 
						

							16 l
REMOTE CONTROL OPERATION
Programming The Remote
The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component
function buttons for VCR, DVD, CABLE or DBS. Follow the procedures for programming your Remote Control with or
without a code for the component.
Determine the manufacturer of the component and look in the table for the code. 
Programming With a Code
Procedure
• Confirm that the external component is plugged in and operating.
• Turn the component off.
• Press  and   together, for at least 5 seconds.
• Press appropriate component button on the Remote Control VCR, DVD,  CABLE or DBS.
• Enter the 3-digit component code using the Remote Control numeric keypad (0 ~ 9 buttons).
• Press the Remote Control   to test the component. If the procedure was successful, the component will turn on.
Programming Without A Code
This procedure searches all codes and is called the “sequence method.”
• Confirm that the external component is plugged in and on.
• Turn the component off.
• Press  and   together, for at least 5 seconds.
• Press appropriate component button on the Remote Control.
• Press VOL u to move forward to the next code. Press t VOL to move backward.
• Press the Remote Control   to test the component. If the procedure was successful, the component will turn on.
Note:Repeat the above steps until the component code is found. It may take many attempts before the correct code
is found.
• After the code is found, press   to store the code.
  Default Modes For Remote Control
DeviceOperatesDefault
TVTV (Panasonic Only)Panasonic TV Codes
VCRVCR (Preset)Panasonic VCR Codes 
DBSDBS (Preset)Panasonic DBS Codes
CABLECABLE (Preset)Panasonic DBS Codes
DVDDVD, CD (Preset) Panasonic DVD Codes
Helpful Hints:  Unsuccessful Code
If the component does not operate with the Remote Control, repeat
the procedure using another code. (Some brands have multiple
codes).
If an incorrect code is entered, or if the procedure takes longer than
30 seconds, the programming will fail.
ACTIONPOWER
POWER
ACTIONPOWER
POWER
ACTION 
						

							REMOTE CONTROL OPERATION
17 l
Component Codes
The Universal Remote Control is capable of operating many component brands after entering a code. Some components
may not operate because the codes are not available due to limited memory. The Universal Remote Control does not
control all features found in each model. 
 
Write the code numbers from tables in this space. This will serve as a reference if you need
to program your Remote Control.
VCR
 DVD DBS CABLE 
BrandCode
Admiral335
Aiwa332
Akai314, 315, 316, 329
Audio Dynamic311, 339
Bell & Howell305, 313
Broksonic320, 326
Canon323, 325
CCE343
Citizen306
Craig305, 306, 329
Curtis Mathes324, 345
Daewoo301, 324, 343
DBX310, 311, 339
Dimensia345
Emerson303, 319, 320, 325, 326, 343
Fisher305, 307, 308, 309, 313
Funai320, 326, 334
GE324, 333, 345
Goldstar306
Gradiente334
Hitachi300, 323, 345
Instant Replay323, 324
Jensen339
JVC310, 311, 334,339
Kenwood306, 310, 311, 339
LXI300, 305, 306,307, 308, 309
Magnavox323, 324, 331
Marantz310, 311, 339
Marta306
Memorex309, 324
MGA338, 340, 341, 347,348
Minolta300, 345
Mitsubishi338, 340, 341, 347, 348
Multitech304, 347
NEC310,311, 334, 339
Olympic323, 324
Optimus306, 321, 328, 335
BrandCode
Orion320, 326
Panasonic321,322, 323, 324
J.C. Penney300,305, 310, 311, 324, 339, 345
Pentax300,311, 345
Philco320, 323, 324, 326, 331, 343
Philips323, 324, 331
Pioneer323
Proscan300, 301, 302, 323, 324, 331, 333, 
345, 346
Quasar321, 322, 323, 324
Radio Shack305, 309, 324, 333, 336, 340
RCA300, 301,302, 323, 324, 331, 333, 
345, 346
Realistic305, 309, 324, 336, 340
Samsung302, 304, 333
Sansui320, 326, 339, 352
Sanyo305, 309, 313
Scott301, 302, 304, 309, 320, 326, 338, 
340, 347, 348
Sears300, 305, 306, 307, 308
Sharp335, 336
Shintom317
Signature 2000335
Singer337
Sony328, 329, 330
Sylvania331, 324, 331
Ta s h i r o306
Ta t u n g310, 311, 339
Te a c310, 311, 339
Te c h n i c s321, 322, 323, 324
Te k n i k a324
To s h i b a301, 346
Vector Research311
Wards306, 309, 335, 336, 344
Yamaha305, 310, 311, 339
Zenith306,344
Codes For VCR 
						

							18 l
REMOTE CONTROL OPERATION
Component Codes (contd.)
BrandCode
ABC224
Archer225, 232
Cableview205, 232
Citizen205, 222
Curtis212, 213
Diamond224, 225, 232
Eagle229
Eastern234
GC Brand205,232
Gemini222
General
Instrument/
Jerrold211, 219, 220, 221, 222, 223, 224, 
225, 226, 227
Hamlin212, 218, 240, 241, 242, 245
Hitachi203, 224
Macom203, 204, 205
Magnavox233
Memorex230
Movietime205, 232
Oak202, 237,239
Panasonic209, 210, 214
Philips206, 207, 228, 229, 230
Pioneer201, 216
Pulsar205, 232
BrandCode
Denon100
Ferguson101
JVC109
Mitsubishi105
Nordmende101
Panasonic100
Philips103
Pioneer102
RCA101
BrandCode
Puser232
RCA215
Realistic232
Regal212, 218, 240, 241, 242, 245
Regency234
Rembrandt205, 232, 237
Samsung205
Scientific Atlanta211, 212, 213
Slmark201, 205
Sprucer205, 210
Stargate205, 232
Te l e v i e w201, 205
Texscan244
Tocom235
Toshiba204
Unika225, 232
Universal222, 232
Videoway206
Viewstar229, 230
Zenith 200, 217
Zenith / Drake 
Satellite200
BrandCode
Saba101
Samsung11 0
Sharp108
Sony104
Technics100
Thomson101
Toshiba103
Yamaha100
Zenith107
Codes for Cable Box
Codes for DVD
Codes for DBS
BrandCode
Panasonic104
Philips101, 102
Primestar108
Proscan 106, 109, 110, 113
RCA 106, 109, 110, 113
Sony 107
Star Choic e103, 108
To s h i b a  100
Uniden 101, 102
BrandCode
Dish Network 
(Echostar)105, 115, 116
Echo Star105
Express VU105, 115
G. E .106
G.I. (General 
Instrument)108
Gradiente11 4
Hitachi1 0 3 ,  111 ,  11 2
HNS (Hughes)103
Magnavox101, 102