Panasonic Color Television Ct 32fsx32 Operating Instructions

							®
®
Color Television
Operating Instructions
CT-32SL32
CT-32SX32CT-36SL32
CT-36SX32CT-F3442
CT-F3442L
CT-F3442X
TQB2AA0418 20516
PRINTED IN USA
Televisor a color
Instrucciones de Operación
TQB2AA0418 20516
IMPRESO EN EE.UU.
For assistance, please call: 1-800-211-PANA (7262) or
send e-mail to: [email protected] (USA only)
Para asistencia llame al teléfono: 1-800-211-PANA (7262)
o envíe un correo electrónico a la dirección: 
[email protected] (Solo en Estados Unidos)
CT-32SL32
CT-32SX32CT-36SL32
CT-36SX32CT-F3442
CT-F3442L
CT-F3442X 
						

							 WARNING: To reduce the risk of electric shock do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.
The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are
in the papers with the
appliance. The lightning flash with arrow
head within a triangle is
intended to tell the user that
parts inside the product are a
risk of electric shock to
persons.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
WA R N I N G:  TO REDUCE THE RISK OF  FIRE OR ELECTRIC SHOCK, DO 
NOT EXPOSE THIS  APPARATUS TO RAIN OR MOISTURE. 
ANY CHANGES OR MODIFICATIONS TO THIS TV 
RECEIVER NOT EXPRESSLY APPROVED BY
MATSUSHITA ELECTRIC CORPORATION OF AMERICA
COULD CAUSE HARMFUL INTERFERENCE, WHICH 
WOULD VOID THE USER’S AUTHORITY TO OPERATE
THIS EQUIPMENT.  FCC CAUTION:
THIS PRODUCT UTILIZES BOTH A CATHODE RAY TUBE (CRT) AND
OTHER COMPONENTS THAT CONTAIN LEAD. DISPOSAL OF THESE
MATERIALS MAY BE REGULATED IN YOUR COMMUNITY DUE TO
ENVIRONMENTAL CONSIDERATIONS. FOR DISPOSAL OR RECYCLING
INFORMATION PLEASE CONTACT YOUR LOCAL AUTHORITIES, OR THE
ELECTRONICS INDUSTRIES ALLIANCE:  ENVIRONMENTAL NOTICE:
Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under USP4638258 and 4482866.
BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
High Definition Sound
The double insulation symbol (a square within a square) is 
intended to alert qualified service personnel to use only iden-
tical replacement parts in this apparatus. 
						

							TABLE OF CONTENTS
1 l
Table of Contents
Congratulations ......................................................... 2
Customer Record ...................................................................... 2
Care and Cleaning..................................................................... 2
Specifications ............................................................................ 2
Installation.................................................................. 3
Television Location .................................................................... 3
Optional Cable Connections ...................................................... 3
AC Power Supply Cord.............................................................. 3
Cable / Antenna Connection...................................................... 3
Feature Chart ............................................................. 4
Auto Set Up Menu...................................................... 5
Optional Equipment Connections  ........................... 6
VCR Connection ........................................................................ 6
Front Control Panel ................................................................... 7
Cable Box Connection ............................................................... 8
VCR and Cable Box Connection ............................................... 8
Digital TV - Set-Top Box or DVD Player Connection................. 9
Program Out Connection (PROG OUT) .................................. 10
Amplifier Connection (TO AUDIO AMP) .................................. 10
PIP Function Buttons  ............................................. 11
Remote Control Operation ..................................... 13
Battery Installation ................................................................... 13
Mode Operational Key Chart  .................................................. 14
Programming the Remote ....................................................... 16
Programming With a Code ...................................................... 16
Programming Without a Code ................................................. 16
Component Codes................................................................... 17
Icon Menu Navigation ............................................. 19
Main Menu Icons ...................................................... 20
Icon Menus .............................................................................. 20
Icon Menu Operation ............................................... 21
Set Up...................................................................................... 21
Picture ..................................................................................... 23
Timer ....................................................................................... 24
Audio ....................................................................................... 25
Channels ................................................................................. 26
Lock ......................................................................................... 27
V-Chip Menu Operation........................................... 28
Troubleshooting Chart ............................................ 33
Limited Warranty ..................................................... 34
Customer Services Directory ................................. 36
Index ......................................................................... 37
Read these instructions completely before operating television.
Contents are subject to change without notice or obligation.
Copyright 2002 by Matsushita Electric Corporation of America. All rights reserved.
Unauthorized copying and distribution is a violation of law.  
						

							2 l
CONGRATULATIONS
Congratulations
Your new TV Monitor/Receiver features a solid state chassis that is designed to give you many years of enjoyment. It was
thoroughly tested and tuned at the factory for best performance.
Customer Record
The model and serial number of this product are located on the back of the television. You should note the model and serial
number in the space provided and retain as a permanent record of your purchase. This will aid in identification in the event
of theft or loss. Product registration for U.S. customers is available at www.prodreg.com/panasonic. 
Model
Number
Serial
Number
Care and Cleaning
Screen (Turn TV Off)
• Use a mild soap solution or window cleaner with a soft clean cloth. DO NOT USE ABRASIVE CLEANERS.
• Avoid excessive moisture and wipe dry.
Note:Do not spray any type of cleaning fluid directly on the screen.
Cabinet and Remote Control
rFor cabinets and remote control, use a soft cloth dampened with water or a mild detergent solution. Avoid excessive moisture and
wipe dry.
rDo not use benzene, thinner or other petroleum based products. 
Specifications
Specifications are subject to change without notice or obligation.
Power Source
CT-32SX32 (2.8A)
CT-32SX32U (2.8A)
CT-32SL32 (2.8A)
CT-32SL32U (2.8A)
CT-36SX32 (2.8A)
CT-36SX32U (2.8A)
CT-36SL32 (2.8A)
CT-36SL32U (2.8A)
120V AC, 60Hz
Channel Capability - 181VHF-12; UHF-56; Cable-113
 Video Input Jacks1Vp-p, 75 Ohm, Phono Jack Type
 Audio Input Jacks500mV RMS 47K Ohm
Video Output Jacks1Vp-p, 75 Ohm, Phono Jack Type
 Audio Output Jacks0-2.0V RMS 4.7K Ohm
Component input (Y / PB / PR)75 Ohms, Phono Jack Type
 S-Video Input JacksS-Video (Y-C) Connector 
						

							INSTALLATION
3 l
Installation
Television Location
Follow these recommendations before deciding the location of your television.
rAvoid excessive sunlight or bright lights, including reflections.
rKeep away from excessive heat or moisture. Inadequate ventilation may cause internal component failure.
rFluorescent lighting may reduce remote control transmitting range.
rKeep away from magnetic equipment, including motors, fans and external speakers.
CAUTION: Use this television receiver only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from
tip-over. In order to avoid injury to children, never place your television receiver on a piece of furniture that is capable of
being tilted by a child leaning on it, pulling on it, standing on it, or climbing on it.  
CT-32SX32, CT-32SX32U:
CAUTION:
 These television receivers for use only with PANASONIC TY-32SX31P stand. Use with other carts (or stands) is capa-
ble of resulting in instability causing possible injury.
CT-32SL32, CT-32SL32U:
CAUTION:
 These television receivers for use only with PANASONIC TY-32HL42P stand. Use with other carts (or stands) is capa-
ble of resulting in instability causing possible injury.
CT-36SX32, CT-36SX32U:
CAUTION:
 These television receivers for use only with PANASONIC TY-36SX31P stand. Use with other carts (or stands) is capa-
ble of resulting in instability causing possible injury.
CT-36SL32, CT-36SL32U:
CAUTION:
 This television receiver for use only with PANASONIC TY-36HL42P stand. Use with other carts (or stands) is capable
of resulting in instability causing possible injury.
Optional Cable Connections
Shielded audio and video cables should be used between components. For best results:
rUse 75-ohm coaxial shielded cables.
rUse appropriate input and output connectors that match your component connectors.
rAvoid long cables to minimize interference.
AC Power Supply Cord
CAUTION: TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC OUTLET
AND FULLY INSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. 
PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT OR PINCHED,
PARTICULARLY AT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS.
Cable / Antenna Connection
For proper reception, either a cable or antenna connection is required.
Cable Connection
Connect the cable supplied by your local cable company.
Note:A cable converter box may be required for proper reception.   Check with your local cable company for
compatibility requirements.
Antenna Connection
• For proper reception of VHF/UHF channels, an external antenna is required. For best reception, an
outdoor antenna is recommended.
• Connect home antenna to ANT on the back of television.
Note:Cable Mode is preset at the factory. Antenna users must change to TV mode in the Set Up Menu under
Prog Chan.
Polarized plug
75 Ohm VHF/UHF
on back of TV
Incoming Cable from
Cable Company
Incoming Cable from
Home Antenna 
						

							4 l
FEATURE CHART
Feature Chart 
 
MODELS
CT-32SX32
 
CT-32SL32
CT-36SX32
CT-36SL32
Features
MENU LANGUAGE  ENG/SPAN/FRrrrr
2 TUNER PIPrrrr
VIDEO PICTURE MEMORYrrrr
CHANNEL INFO BANNERrrrr
VIDEO INPUT SKIPrrrr
2RFrrrr
V-CHIP CAPABILITY rrrr
CLOSED CAPTIONINGrrrr
VIDEO NORMrrrr
AUDIO NORMrrrr
STEREOrrrr
BASS/TREBLE/BALANCErrrr
SURROUNDrrrr
AI SOUNDrrrr
BBErrrr
SUBWOOFERrr
A/V IN  (REAR/FRONT)3 
(2/1)3 
(2/1)3
(2/1)3 
(2/1)
A/V PROGRAM OUTrrrr
S-VIDEO INPUT  (REAR/FRONT)2 
(1/1)2 
(1/1)2
(1/1)2 
(1/1)
COMPONENT VIDEO INPUTrrrr
HEADPHONE JACKrrrr
IMPORTANT INFORMATION REGARDING THE USE OF VIDEO GAMES, COMPUTERS, OR
OTHER FIXED IMAGE DISPLAYS.
WARNING: The marking or retained image on the picture tube resulting from viewing fixed
image is not an operating defect and as such is not covered by Warranty. 
This television is designed to display constantly moving images on the screen. Continuous viewing
of stationary images such as letterbox pictures on standard screen TVs (with top/bottom bars), non-
expanded standard (4:3) pictures on wide screen TVs (with side bars shown on each side of an
image), stock market report bars (ticker running at the bottom of the screen), video game patterns,
fixed scoreboards, bright station logos, on-line (internet) or repetitive computer style patterns should
be limited.
The extended use of fixed image program material can cause a permanent picture tube damage,
shown as a “shadow image” viewable on normal programs. This type of irreversible picture tube
deterioration can be limited by performing the following steps:
• Do not display the fixed image for extended periods of  time.
• Turn the power off when not in use.
A/V JACKS
AUDIO
SPECIAL  FEATURES 
						

							AUTO SET UP MENU
5 l
Auto Set Up Menu
For your convenience, Auto Set up menu will be displayed on screen when the set is turned on for the first time. If needed, 
follow the menus and procedures for setting up the features. 
rIDIOMA/LANGUE - To change menu language to ENGLISH, SPANISH or FRENCH.  
rMODE - To select TV (antenna) or CABLE mode depending on the signal source.  
rAUTO PROGRAM - To automatically program all channels with a signal. 
r
GEOMAGNETIC CORRECTION - This feature is used to adjust discoloration of the picture due to  earth’s magnetic
field in the area.
 
rTILT CORRECTION - 
This feature is used to adjust the tilt of the picture due to earth’s magnetic field in the area.    rPress VOL u to select English, Spanish or French.
IDIOMA/LANGUE ENGLISH
CABLE MODE
AUTO PROGRAM
PRESS ACTION TO EXITu
u
uAUTO SET UP
FIRST PLEASE
CONNECT THE ANTENNA
GEOMAGNETIC CORRECTIONuTILT CORRECTIONu
rPress VOL u to select TV or CABLE.IDIOMA/LANGUE ENGLISH
CABLE MODE
AUTO PROGRAM
PRESS ACTION TO EXITu
u
uAUTO SET UP
FIRST PLEASE
CONNECT THE ANTENNA
GEOMAGNETIC CORRECTIONuTILT CORRECTIONu
rPress VOL u to start Auto Programming.IDIOMA/LANGUE ENGLISH
CABLE MODE
AUTO PROGRAM
PRESS ACTION TO EXITu
u
uAUTO SET UP
FIRST PLEASE
CONNECT THE ANTENNA
GEOMAGNETIC CORRECTIONuTILT CORRECTIONu
IDIOMA/LANGUE ENGLISH
CABLE MODE
AUTO PROGRAM
PRESS ACTION TO EXITu
u
uAUTO SET UP
FIRST PLEASE
CONNECT THE ANTENNA
GEOMAGNETIC CORRECTIONuTILT CORRECTIONu
rPress VOL u to display adjustment menu.
rPress tVOL or VOL u to adjust discoloration in
picture.
GEOMAGNETIC CORRECTION
- - - - - - - - -  - - - - - - - - -
0
tTO ADJUSTu
PRESS ACTION TO EXITl
IDIOMA/LANGUE ENGLISH
CABLE MODE
AUTO PROGRAM
PRESS ACTION TO EXITu
u
uAUTO SET UP
FIRST PLEASE
CONNECT THE ANTENNA
GEOMAGNETIC CORRECTIONuTILT CORRECTIONu
rPress VOL u to display adjustment menu.
rPress tVOL or VOL u to adjust picture tilt. 
            TILT CORRECTION
- - - - - - - - -  - - - - - - - - -
0
tTO ADJUSTu
PRESS ACTION TO EXITl 
						

							6 l
OPTIONAL EQUIPMENT CONNECTIONS
Optional Equipment Connections
VCR Connection
VCRs, video disc players, video game equipment, and DSS equipment can also be connected to the video inputs. See the
optional equipment manual for more information. 
Note:Input 1 is a dual-purpose input. It is primarily intended for connection with 480i devices such as a DVD player using the
Y P
B PR component video jacks and Audio L & R jacks. However, it can also be connected to conventional composite
video sources such as a VCR, using only the Y/Video jack and Audio L & R jacks. The on-screen label will display
Component or Video 1 depending on which source is connected.  
 
If INPUT 1 is used as component video input, connect the A/V Out from the VCR to INPUT 2 A/V jacks. Connect Video Out
and Audio out from VCR to INPUT 2 Video jack and Audio L& R jacks. INPUT 3 can also be used to connect a VCR and
other optional video equipments.
Note:The remote control must be programmed with supplied codes to operate the VCR. 
Viewing a television program
Procedure
1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to the television program you want to view.
Viewing a video
Procedure
rOption A
1. Select ANT1 in the SET UP menu under Prog Chan.
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.
3.  Begin the video.
rOption B
1. Select ANT2 in the SET UP menu under Prog Chan.
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Begin the video.
Recording a television program
Procedure
rOption A (Recording and viewing the same program)
1. Select ANT2 in the SET UP menu under Prog Chan.
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Using the VCR, tune to the television program you want to record.
4. Begin recording.
rOption B (Recording one program while viewing another program)
1. Select ANT1 in the SET UP menu under Prog Chan.
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.
3. Using the VCR, tune to the television program you want to record.
4. Begin recording.
5. Press the TV/VIDEO button on the remote control to switch back to TV mode.
6. Tune the television to the television program you want to view. 
VCR
CABLES NOT SUPPLIED
 TERMINALS ON BACK OF THE TV
S-VIDEO
AUDIO VIDEO/Y
P
B
PR
PROG 
OUT
L COMPONENT
ANT 1
ANT 2 SPLIT OUT
TO AUDIO AMP
   VIDEO INPUTS
L
R AUDIO OUTVIDEO OUT
ANT IN ANT OUT 
Incoming 
Cable
Use either the
S-Video or Video
connection.  
RL
RL
R
INPUT 1 INPUT 2
VIDEO 
						

							OPTIONAL EQUIPMENT CONNECTIONS
7 l
Front Control Panel (models CT-32SX32 and CT-36SX32)
Press   to select VIDEO 3 input mode. 
Note:The front control panel located behind the customer control door can be used to access menus and switch video mode when
the remote control is not available.
 
A second VCR, Camcorder, a video disc player, video game equipment or DSS equipment can also be connected to the
video inputs. See the optional equipment manual for details.
Procedure
1. Connect equipment to front Audio/Video input jacks.
2. Press TV/VIDEO button to select VIDEO 3 input mode.
3. Operate optional equipment as instructed in equipment manual.
Front control Panel (models CT-32SL32 and CT-36SL32)
Follow the procedure above to connect the optional equipment to front Audio/Video input jacks.
TV/VIDEO
ACTION TV/VIDEOq CHANNEL p t VOLUME u
POW ER
HPJS-VIDEOVIDEO L-AUDIO-RINPUT  3
ON/OFF INDICATOR
POWER ON/OFFNote:The ON/OFF indicator LED (red) will be lit when set is on. 
Note:The S-VIDEO connection provides higher quality picture. It
overrides VIDEO 3 connections. Use INPUT 3, AUDIO L
and R with S-VIDEO connection.
CAMCORDER
INPUT 3
p
CH
S-VIDEO VIDEO L-AUDIO-R HPJ
ACTIONTV/VIDEO POW ER VOL u t
 VOL
q
CH
Note:The ON/OFF indicator LED (red) will be lit when set is on. 
CAMCORDERPOWER ON/OFFON/OFF INDICATORINFRARED SENSOR
Note:The S-VIDEO connection provides higher quality picture. It overrides VIDEO 3 connections. Use INPUT 3, AUDIO L and R 
with S-VIDEO connection. 
						

							8 l
OPTIONAL EQUIPMENT CONNECTIONS
Cable Box Connection 
Follow this diagram when connecting your television to a cable box only.
Note:The remote control must be programmed with supplied codes to operate the cable box.
Viewing a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channel 3.
3. Using the cable box, tune to the premium cable channel you want to view.
Note:To use special features such as Channel Caption, ANT1 must be selected in the SET UP menu under Prog Chan.
VCR and Cable Box Connection  
Follow this diagram when connecting your television to both a VCR and a cable box.
Note:The remote control must be programmed with supplied codes to operate the VCR and cable box. 
Viewing a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channel 3.
3. Using the cable box, tune to the premium cable channel you want to view. 
Recording a premium (scrambled) cable channel 
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan.
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.
3. Turn the VCR ON.
4. Tune the VCR to Channel 3 or 4, depending on the switch setting on the back of VCR.
5. Using your cable box, tune to the premium cable channel you want to record.
6. Begin recording.
Note:To view a different channel while recording:
• Select ANT1 in the SET UP menu under Prog Chan.
• Press the TV/VIDEO button on the remote control to TV mode.
• Tune the television to a different program (except another premium cable channel).
 TERMINALS ON BACK OF THE TV
S-VIDEO
AUDIO VIDEO/Y
P
B
PR
PROG 
OUT
L COMPONENT
ANT 1
ANT 2 SPLIT OUT
TO AUDIO AMP
   VIDEO INPUTS
RL
RL
R
INPUT 1 INPUT 2
VIDEOCABLE BOX
INCOMING 
CABLE
CABLES NOT SUPPLIED
ANT OUTANT IN
 TERMINALS ON BACK OF THE TV CABLES NOT SUPPLIED
Incoming 
Cable
CABLE BOX
ANT INANT OUT
VCR
L
R AUDIO OUTVIDEO OUT
ANT OUT ANT IN 
S-VIDEO
AUDIO VIDEO/Y
P
B
PR
PROG 
OUT
L COMPONENT
ANT 1
ANT 2 SPLIT OUT
TO AUDIO AMP  VIDEO INPUTS
RL
RL
R
INPUT 1 INPUT 2
VIDEO