Panasonic Color Television Ct 27d32 Operating Instructions

							OPTIONAL EQUIPMENT CONNECTIONS9 ?2 Tuner PIP Operation with a VCR - NO Cable Box
This television includes a two tuner Picture In Picture (PIP) feature. This allows viewing two (2) live broadcasts at the same
time without or with an external video source (VCR). 
Connect your television to a VCR, as shown.
Note:The Remote Control must be programmed with the supplied codes to operate the VCR. 
Procedure 
Press the PIP button on the Remote Control to display the PIP frame on screen. 
Note: The audio is from the Main Picture only.
To view an external video source in the PIP frame:
1.Press the TV/VIDEO button on the Remote Control to select the same video input to which your VCR is connected.
2.Verify the VCR is on.
3.Choose channels for the Main Picture by pressing the TV button on the Remote Control and using the numeric keypad or CH
up/down button.
4.Choose channels for the PIP frame by pressing the VCR button on the Remote Control and using the VCR/DBS CH up/down
buttons.
      COMPONENT
VIDEO INPUT
INPUT 1RAUDIOLP
B P
RY/VIDEOTO AUDIO
AMP
L
RRAUDIOLINPUT 2VIDEO S-VIDEOL
RVIDEO OUT
AUDIO OUTANT INANT INANT OUTCONNECTIONS ON BACK OF TV
VCR
Incoming
Cable
CABLES NOT SUPPLIED   SWAP and RECALL Buttons
The SWAP button switches the PIP and
Main Picture source. Press the RECALL
button for on screen PIP and Main Picture
source status. 
						

							10 ?PIP FUNCTION BUTTONSPIP Function Buttons
PIP (Picture-in-Picture) Button
Swap Button  
Size Button
PIP Channel ButtonsCH 2
PIP VIDEO 1
Main 
picture
with
Audio PIP FramePIP Video Source
or
PIP CH #Main Picture
Channel?Press  to display PIP frame.
?Press  while PIP frame is displayed to select desired input
mode.
?Press  again to cancel the PIP feature.
Note:Audio is from Main Picture onlyCH 2
PIP VIDEO 1VIDEO 1
CH 2INPUT:?Press  (when PIP frame is displayed) to interchange the main
picture with the picture in the PIP frame.small PIP frame?Press  (when PIP frame is displayed) to choose either the
large or small PIP frame.Main Picture
large PIP framePIP CH #Main Picture
PIP framePIP channel?Press the  while PIP frame is displayed to scan
through channels. 
						

							PIP FUNCTION BUTTONS11 ?PIP Function Buttons (contd.)
Move Button
Freeze Button
TV/VIDEO Button
 
Search Button 
 ?The PIP frame may be placed at any corner of the Main Picture by pressing the  button.
Each time the MOVE button is pressed, the PIP frame will move counterclockwise as illustrated.Main 
Picture
PIP 
Frame?Press  to stop action in the Main or PIP frame.
Note:
•Pressing FREEZE button when PIP frame is not displayed, will display a
snapshot image of the main picture in the PIP frame.
•Pressing FREEZE button when PIP frame is displayed, will freeze the
action in the PIP frame. Press the FREEZE button again to continue
action.PIP FramePIP CH #PIP VIDEO 1PIP VIDEO 2
PIP VIDEO 3?Press  while PIP frame is displayed to
select desired input mode. Search Frame?This feature lets you scan through all availablechannels.
?Press  to display search frames.
?Press  to stop search frame or press
 to delete search frame.  Main Picture 
						

							12 ?REMOTE CONTROL OPERATIONRemote Control Operation               
POWERPress to turn ON and OFF.POWERMUTE
 Press to mute sound. Press to display and
cancel CC (Closed Caption).SAP
 Press to acces second audio program.TV/VIDEO
 Press to select TV, Video mode.Press to select remote operation.  TV VCRDBS/CBL DVDACTIONPress to access menus.Press to select next or previous channel and 
navigate in menus.CH
CHPress to adjust TV sound and navigate in 
menus.VOL  VOLEXITDBS functions button.GUIDEDBS functions button.MOVE
REWSIZE
 PLAYPIP
FFSWAP
PAUSESEARCH
STOPRECFREEZE
TV/VCR PIP CH
VCR /DBS CHComponent function buttons
?Press numeric keypad to select any channel.7412580963R-TUNEPress to switch to previously viewed 
channel or video mode.EUR7613Z30Battery Installation
Use two AA batteries:
Remove battery cover by pushing in and up neararrow.
Install batteries matching (+) and (-) polarity signs.
Replace the battery cover.
Note:Incorrect installation can cause battery leakage and
corrosion that will damage the Remote ControlPrecautions
•Replace batteries in pairs.
•Do not mix battery types (zinc carbon
with alkaline).
•Do not recharge, heat, short-circuit,
disassemble, or burn batteries.PROGPress to enter minor number in a compound 
number.RECALLPress to display time, channel, sleep timer, 
and other options.MENU
 Press to access DBS or DVD menus. 
						

							REMOTE CONTROL OPERATION13 ?Mode Operational Key Chart
This chart defines the  keys that are opereational in the selected component modes (TV, VCR, DBS, CABLE or DVD) after
programming (if needed).    KEY NAME TV  MODECABLE MODEDBS MODEPOWER   POWER POWER POWERSAPSAP ON/OFF-STB AUDIO TRACKMUTE    MUTETV MUTETV MUTETV/VIDEO INPUT SWITCHTV INPUT SWITCHTV INPUT SWITCHMENU --DBS MENUCHAN  UP CHANNEL UPCABLE CHANNEL UPDBS NAVIGATION UPCHAN  DOWN CHANNEL DOWNCABLE CHANNEL DOWNDBS NAVIGATION DOWNVOL RIGHT VOL +TV VOL +DBS NAVIGATION RIGHTVOL LEFT VOL -  TV VOL -DBS NAVIGATION LEFTACTION ACTION-DBS MENURECALL DISPLAYTV DISPLAYDBS PROG. INFOEXIT--DBS EXITGUIDE--DBS GUIDEPROG--DBS1 DIGIT 1DIGIT 1DIGIT 12 DIGIT 2DIGIT 2DIGIT 23 DIGIT 3DIGIT 3DIGIT 34 DIGIT 4DIGIT 4DIGIT 45 DIGIT 5DIGIT 5DIGIT 56 DIGIT 6DIGIT 6DIGIT 67 DIGIT 7DIGIT 7DIGIT 78 DIGIT 8DIGIT 8DIGIT 89 DIGIT 9DIGIT 9DIGIT 90 DIGIT 0DIGIT 0DIGIT 0R-TUNEPREVIOUS CHAN 
OR VIDEO MODECABLE PREVIOUS 
CHANNELPREVIOUS DBS CHANNELPROG--DBS PROGRAM MOVE
  TV PIP ON / OFF--SWAP
PAUSETV PIP SWAP--SEARCH
STOPTV PIP SEARCH--RECORDVCR RECORD--FREEZE/TV/VCRTV PIP FREEZE-- PIP CH
 VCR/DBS CH
      TV PIP CHANNEL DOWN-DBS CHANNEL DOWN  PIP CH
  VCR/DBS CH
      TV PIP CHANNEL UP-DBS CHANNEL UP 
						

							14 ?REMOTE CONTROL OPERATIONMode Operational Key Chart (contd.)
 KEY NAME 
VCR MODEDVD MODEPOWER POWER POWERSAP--MUTETV MUTETV MUTEMENU--TV/VIDEOTV INPUT SWITCHTV INPUT SWITCHCHAN  UP-NEXT CHAPTERCHAN  DOWN - PREVIOUS CHAPTERVOL RIGHT    TV VOLUME + NAVIGATION RIGHTVOL LEFTTV VOLUME - NAVIGATION LEFTACTION--RECALLONSCREEN VCR
DISPLAYDVD DISPLAYEXIT--GUIDE--PROG--1--2--3--4--5--6--7--8--9--0--R-TUNE--    MOVE
SWAP
PAUSEVCR PAUSEDVD STILLSEARCH
STOPVCR STOPDVD STOPRECORDVCR RECORD-FREEZE/TV/VCRTV/VCR SWITCHOPEN/CLOSEPIP CH
VCR/DBS CH
 VCR CHANNEL 
DOWNSLOW - PIP CH
 VCR/DBS CH
 VCR CHANNEL UPSLOW + 
						

							REMOTE CONTROL OPERATION15 ?Programming The Remote
The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component
function buttons for VCR, DVD, CABLE or DBS. Follow the procedures for programming your Remote Control with or
without a code for the component.
Determine the manufacturer of the component and look in the table for the code. 
Programming With a Code
Procedure
•Confirm that the external component is plugged in and operating.
•Turn the component off.
•Press  and  together, for at least 5 seconds.
•Press appropriate component button on the Remote Control VCR, DVD,  CABLE or DBS.
•Enter the 3-digit component code using the Remote Control numeric keypad (0 ~ 9 buttons).
•Press the Remote Control  to test the component. If the procedure was successful, the component will turnon.
Programming Without A Code
This procedure searches all codes and is called the “sequence method.”
•Confirm that the external component is plugged in and on.
•Turn the component off.
•Press  and  together, for at least 5 seconds.
•Press appropriate component button on the Remote Control.
•Press  to move forward to the next code. Press  to move backward.
•Press the Remote Control  to test the component. If the procedure was successful, the component will turn on.
Note:Repeat the above steps until the component code is found. It may take many attempts before the correct code
isfound.
•After the code is found, press  to store the code.   Default Modes For Remote ControlDeviceOperatesDefaultTVTV (Panasonic Only)Panasonic TV CodesVCRVCR (Preset)Panasonic VCR Codes DBSDBS (Preset)Panasonic DBS CodesCABLECABLE (Preset)Panasonic DBS CodesDVDDVD, CD (Preset) Panasonic DVD CodesHelpful Hints:  Unsuccessful Code
If the component does not operate with the Remote Control, repeat
the procedure using another code. (Some brands have multiple
codes).
If an incorrect code is entered, or if the procedure takes longer than
30 seconds, the programming will fail.ACTIONPOWERPOWER
ACTIONPOWERVOLVOLPOWER
ACTION 
						

							16 ?REMOTE CONTROL OPERATIONComponent Codes
The Universal Remote Control is capable of operating many component brands after entering a code. Some components
may not operate because the codes are not available due to limited memory. The Universal Remote Control does not
control all features found in each model.  Write the code numbers from tables in this space. This will serve as a reference if you need
to program your Remote Control.
VCR DVD DBS CABLE BrandCodeAdmiral335Aiwa332Akai314, 315, 316, 329Audio Dynamic311, 339Bell & Howell305, 313Broksonic320, 326Canon323, 325CCE343Citizen306Craig305, 306, 329Curtis Mathes324, 345Daewoo301, 324, 343DBX310, 311, 339Dimensia345Emerson303, 319, 320, 325, 326, 343Fisher305, 307, 308, 309, 313Funai320, 326, 334GE324, 333, 345Goldstar306Gradiente334Hitachi300, 323, 345Instant Replay323, 324Jensen339JVC310, 311, 334,339Kenwood306, 310, 311, 339LXI300, 305, 306,307, 308, 309Magnavox323, 324, 331Marantz310, 311, 339Marta306Memorex309, 324MGA338, 340, 341, 347,348Minolta300, 345Mitsubishi338, 340, 341, 347, 348Multitech304, 347NEC310,311, 334, 339Olympic323, 324Optimus306, 321, 328, 335BrandCodeOrion320, 326Panasonic321,322, 323, 324J.C. Penney300,305, 310, 311, 324, 339, 345Pentax300,311, 345Philco320, 323, 324, 326, 331, 343Philips323, 324, 331Pioneer323Proscan300, 301, 302, 323, 324, 331, 333, 
345, 346Quasar321, 322, 323, 324Radio Shack305, 309, 324, 333, 336, 340RCA300, 301,302, 323, 324, 331, 333, 
345, 346Realistic305, 309, 324, 336, 340Samsung302, 304, 333Sansui320, 326, 339, 352Sanyo305, 309, 313Scott301, 302, 304, 309, 320, 326, 338, 
340, 347, 348Sears300, 305, 306, 307, 308Sharp335, 336Shintom317Signature 2000335Singer337Sony328, 329, 330Sylvania331, 324, 331Tashiro306Tatung310, 311, 339Teac310, 311, 339Technics321, 322, 323, 324Teknika324Toshiba301, 346Vector Research311Wards306, 309, 335, 336, 344Yamaha305, 310, 311, 339Zenith306,344Codes For VCR 
						

							REMOTE CONTROL OPERATION17 ?Component Codes (contd.)BrandCodeABC224Archer225, 232Cableview205, 232Citizen205, 222Curtis212, 213Diamond224, 225, 232Eagle229Eastern234GC Brand205,232Gemini222General
Instrument/
Jerrold211, 219, 220, 221, 222, 223, 224, 
225, 226, 227Hamlin212, 218, 240, 241, 242, 245Hitachi203, 224Macom203, 204, 205Magnavox233Memorex230Movietime205, 232Oak202, 237,239Panasonic209, 210, 214Philips206, 207, 228, 229, 230Pioneer201, 216Pulsar205, 232BrandCodeDenon100Ferguson101JVC109Mitsubishi105Nordmende101Panasonic100Philips103Pioneer102RCA101BrandCodePuser232RCA215Realistic232Regal212, 218, 240, 241, 242, 245Regency234Rembrandt205, 232, 237Samsung205Scientific Atlanta211, 212, 213Slmark201, 205Sprucer205, 210Stargate205, 232Teleview201, 205Texscan244Tocom235Toshiba204Unika225, 232Universal222, 232Videoway206Viewstar229, 230Zenith 200, 217Zenith / Drake 
Satellite200BrandCodeSaba101Samsung110Sharp108Sony104Technics100Thomson101Toshiba103Yamaha100Zenith107Codes for Cable Box
Codes for DVD
Codes for DBSBrandCodePanasonic104Philips101, 102Primestar108Proscan 106, 109, 110, 113RCA 106, 109, 110, 113Sony 107Star Choice103, 108Thoshiba 100Uniden 101, 102BrandCodeDish Network 
(Echostar)105, 115, 116Echo Star105Express VU105, 115G.E.106G.I. (General 
Instrument)108Gradiente114Hitachi103, 111, 112HNS (Hughes)103Magnavox101, 102 
						

							18 ?ICON MENU NAVIGATIONIcon Menu NavigationPressto display the Icons.Pressto select desired icon.Pressto display selected
Icon features. Pressto select feature.Pressto adjust or activate feature.BRIGHTNESS 32  -- -- -- I -- -- -- Press repeatedly to exit menus.NORMAL PICTUREEXITEXIT