Panasonic Color Laser Multi-Function Printer Dp Mc210 Operating Instructions

							12. Paper Jams
101
12 Paper Jams Jams
12.1 Recording paper jam
Caution:
LDo not pull out the jammed paper forcibly before 
opening the left cover.
LDo not open the paper input tray as the jammed 
paper may be pulled and the jam may get worse.
12.1.1 When the recording paper has 
jammed inside of the unit
The display will show the following.
–“Paper Jammed”
“Open Left Cover”
“Hot Caution”
–“Paper Jammed”
b
“Open Left Cover Hot Caution”
1Push the left cover open lever (1) upward, then pull 
open the left cover (2).
Note:
LDo not touch the rollers (4).
Caution:
LDuring or immediately after printing, 
the fuser unit (3) gets hot. Wait until 
the fuser unit cools down before 
removing the jammed paper.
3
4
2
1 
						

							12. Paper Jams
102
2Remove the jammed paper.
Case 1:
When the recording paper has jammed near the 
rollers:
1.Remove the jammed paper (5) carefully by pulling it 
toward you.
2.Close the left cover.Case 2:
When the recording paper has jammed near the 
fuser unit:
1.Lift both green levers (6) until they stop.
2.Remove the jammed paper (7) carefully by pulling it 
toward you.
Example 1:
Example 2:
5
6
7
7 
						

							12. Paper Jams
103
3.Push back the green levers (8) to their original 
positions.
4.Close the left cover.Case 3:
When the recording paper has jammed inside of the 
optional automatic duplex unit:
1.Close the left cover.
2.Open the automatic duplex unit cover (9).
3. When the document has jammed near the roller:
Hold the automatic duplex unit cover and remove the 
jammed paper (j) carefully by pulling it upward.
8
9
j 
						

							12. Paper Jams
104
When the document has jammed near the 
recording paper exit of the automatic duplex unit:
Hold the automatic duplex unit cover and remove the 
jammed paper (k) carefully by pulling it toward you.
4.Close the automatic duplex unit cover.12.1.2 When the recording paper has 
jammed near the optional input tray
The display will show the following.
–“Paper Jammed”
“Open Tray #2”
“Left Cover”
–“Paper Jammed”
b
“Open Tray #2 Left Cover”
1Open the cover (1) at the left side of the optional 
input tray.
2Remove the jammed paper (2).
k
1
2 
						

							12. Paper Jams
105
3Close the cover at the left side of the optional input 
tray.12.1.3 When the recording paper is not fed 
into the unit properly
The display will show the following.
–“Check Pick Up Input Tray #1” (standard 
input tray)
–“Check Pick Up Input Tray #2” (optional input 
tray)
1Pull the paper input tray until it clicks into place, then 
pull it completely out, lifting the front part of the tray. 
Remove the recording paper and straighten.
2Re-load the recording paper.
Standard input tray:
Optional input tray:
3Insert the paper input tray to the unit, lifting the front 
part of the tray. Then push it completely into the unit.
Note:
LIf the error message is still displayed, check the 
recording paper specifications and re-install 
recording paper. See page 15 and page 84 for 
details. 
						

							12. Paper Jams
106
12.2 Document jams (Automatic 
document feeder)
Caution:
LDo not pull out the jammed document forcibly 
before lifting the ADF cover.
1Open the ADF cover (1) while holding the 
document cover (2).
2Remove the jammed document (3) carefully.
When the document has jammed near the 
document entrance:
When the document has jammed near the 
document exit:
3Close the ADF cover.
1
2
3
3 
						

							13. Cleaning
107
13 Clean in g Cleaning
13.1 Cleaning the white plates 
and glass
Clean the white plates and glass when a black line, a 
white line or a dirty pattern appears on:
– your recording paper,
– the original document,
– the scanned data, or
– the fax document received by the other party.
Caution:
LDo not use paper products, such as paper towels 
or tissues for cleaning.
1Open the document cover (1).
2Hold the document cover (2) while cleaning the 
white plates (3) and the scanner glass (4).
3Close the document cover (5).
1
2
4
3
5 
						

							13. Cleaning
108
13.2 Cleaning the document 
feeder rollers
Clean the rollers when the document frequently 
misfeeds.
Caution:
LDo not use paper products, such as paper towels 
or tissues for cleaning.
1Turn the power switch OFF.
2Open the ADF cover (1) while holding the 
document cover (2).
3Clean the document feeder rollers (3) with a cloth 
moistened with water, and let all parts dry 
thoroughly.
4Close the ADF cover.
5Turn the power switch ON.
1
2
3 
						

							13. Cleaning
109
13.3 Cleaning the paper chute
Clean the paper chute inside the unit when a line or a 
dirty pattern appears at the top or bottom of your 
recording paper.
1Turn the power switch OFF.
2Push the left cover open lever (1) upward, then pull 
open the left cover (2).
Note:
LDo not touch the rollers (4).
3Clean the paper chute (5) with a dry paper towel or 
tissue.
Note:
LDo not touch the black belt (6), or rub it strongly.
4Close the left cover.
5Turn the power switch ON. Caution:
LDuring or immediately after printing, 
the fuser unit (3) gets hot. Wait until 
the fuser unit cools down before 
cleaning the paper chute.
3
4
1
2
6
5 
						

							14. General Information
110
14 G en era l In for m at i on Printe d Repor ts
14.1 Reference lists and reports
You can print out the following lists and reports for your 
reference.
–“Setup List”
–“Tel No. List”
–“Journal Report”
–“Broadcast List”
–“Printer Test”
–“Color Test”
–“Caller ID List”
–“PCL Font List”
–“Address List”
–“FTP Server List”
1{Menu}
2Press {V} or {^} repeatedly to select “Print 
Report”.
3Press {} repeatedly to select the desired 
item.
4Press {Set} to start printing. i {Menu}
Color test
The unit will print a color test page consisting of black, 
cyan, magenta and yellow lines so you can specify which 
drum cartridge has the problem.
If vertical, white lines appear on the color test page, try 
the following to solve the problem.
Solution 1: Cleaning the drum cartridge
Important:
LThis solution uses at least 3 pages of recording 
paper. Make sure there is enough recording 
paper installed in the standard input tray 
beforehand.
1.{Menu} i {#}{4}{8}{0}
2.Select the color which has vertical, white lines in the 
color test page.
{1} “Black” (default)
{2} “Cyan”
{3} “Magenta”
{4} “Yellow”
3.{Set}LThe drum cartridge will be cleaned automatically 
by printing out 3 pages of the selected color.
LRepeat steps 1 to 3 for all lines with vertical, white 
lines.
LPrint the color test again. If the vertical, white 
lines remain, try the next solution.
Solution 2: Changing the drum cartridge
LIf the black test page has vertical, white lines, change 
the monochrome drum cartridge.
LIf the cyan, magenta or yellow test page has vertical, 
white lines, change the color drum cartridge.
LPrint the color test again. If the vertical, white lines 
remain, contact our service personnel.
{Menu}
{V}{^}{}{Set}