Panasonic Color Cctv Camera Wv Cw864a Operating Instructions

-11-
Position Setting (P. 18)
Dwell Time Setting (P. 21)
Chroma Level Setting (P. 40)
Aperture Level Setting (P. 40)
Pedestal Level Setting (P. 40)
Resolution (P. 40)
Digital Noise Reduction 
(P. 41)
BW Mode (P. 41)
PIX OFF Setting (P. 42)
Super-D2 OFF (P. 35)
Preset ID Editing (P. 18)
Super-D2 ON (P. 35)
Manual Iris Adjustment (P. 35)
Shutter Speed (P. 36)
Gain Control (P. 36)
Electronic Sensitivity
Enhancement (P. 36)
White Balance (P. 38)
Motion Detector (P. 39)
Auto Focus (P. 40)
Unit Number (P. 43)...

-12- The keys (switches) to be used for setup are shown in the table below. The joystick on the connected controller may
also be used for setup. The table also shows the functions and the operations of the individual controllers. For details,
see the manual for the controller to be used. Switches and controls are abbreviated as SW and CTRL respectively in
the table.
Notes:
•A changed parameter is entered only when you move the cursor to another
item or open a new menu. If you close the setup menu without...

-13-
■Setup Menu Description
●Presetting
(1) Position (POSITION SET)
Aligns the camera position and focal point by pan-
ning, tilting, zooming and focusing.
See page 18 for the setting.
(2) Preset Identification (PRESET ID)
Assigns the name for preset IDs (identification of up
to 16 alphanumeric characters) and can be
switched on or off on the monitor screen.
See page 20 for the setting.
(3) Light Control (ALC/MANUAL)
Selects the ALC or MANUAL mode for adjusting the
lens iris.
See page 21 for the...

-14-
(2) Proportional Pan-Tilt Speed (PROPO. P/T)
If ON is selected, the pan-tilt speed changes auto-
matically corresponding to the zoom ratio. For
example, the pan-tilt speed slows down when the
camera zooms in. See page 28 for details.
(3) Area Title (AREA TITLE)
Up to 8 area titles can be assigned to specific
scenes on the DIRECTION (NESW) menu or by
alphanumeric (USER) assignment. The area title is
displayed under the camera ID on the monitor
screen when the camera turns to a position that has
been...

-15- Generally, when a light from the background is too
strong such as a spotlight, all objects except the
main object in the picture are displayed darker
because the lens iris is adjusted with respect to
strong brightness. This model ignores strong bright-
ness by masking the source of the strong bright-
ness, thereby the main object is displayed clearly.
Notes:
•The result of field setup of the mask area and level
adjustment is fed back (effected) to the lens iris con-
trol in the ALC mode.
•Select OFF...

-16-
(9) Auto Focus (AF MODE)
The camera adjusts the focus automatically by sens-
ing the center of the picture. S, M and L stand for
the size of the sensing area: Small, Middle and
Large.
See page 40 for details.
MANUAL S, M, L:Auto-focus is activated only when
the AF key on the controller is pressed.
AUTO S, M, L:Auto-focus is activated automatically
while a manual pan, tilt or zoom operation is per-
formed.
Note:If SENS UP is set to ON except x2 FIX or x2
AUTO, the AUTO (S/M/L) mode is disabled and...

SETTING PROCEDURES
The following setting procedures are described on the
assumption that this model is used in combination with
WJ-SX550C Matrix Switcher and WV-CU550C/CJ
System Controller. In case a controller other than WV-
CU550C is used, refer to the table on page 12.
■Menu Display
●Setup Menu Display
WV-CU550C/CJ
1. Select the number of the camera you want to set up
and a monitor to display SET UP MENU.
2. Display the D4 menu on the LCD by pressing the
appropriate direction buttons.
3. Press the F1...

-18-
■Preset Menu
●Preset Menu Display
1.Displaying the preset menu directly
(1) Move the cursor to PRESET 1 
Oand select the
position number with the joystick.
(2) Press the CAM (SET) key.
The preset setting menu appears on the monitor
screen.
2.Displaying the preset menu from the PRESET NUM-
BER SET menu
(1) Move the cursor to MAP 
Oand press the CAM
(SET) key.
The PRESET NUMBER SET menu appears on the
monitor screen.
(2) Move the cursor to the position number to be set
and press the CAM (SET) key.
The...

-19-
3. Pan Offset
If the camera is replaced with a new one, the pan
offset function is used to adjust its positions to be
the same as before except patrol setting.
The system controller can download or upload the
preset position data.
Caution:The preset data for other cameras (WV-
CW654 for example) is incompatible with WV-
CW864A’s. WV-CW864A’s preset data will be
destroyed if you upload the conventional data. If
this happened, reset the WV-CW864A to the
default settings. Download the factory settings...

-20-
●Preset Identification Setting (PRESET
ID)
1.Move the cursor to PRESET ID on the preset setting
menu and select ON or OFF with the joystick.
The factory default setting is OFF.
ON:Preset ID appears on the monitor screen.
OFF:Preset ID does not appear.
2.Press the CAM (SET) key to display the preset ID
setting menu.
To Enter a New Preset ID
(1) Move the cursor to the desired character using
the joystick, and press the CAM (SET) key.
(2) The selected character appears in the editing
area. (The pointer...