Panasonic Color Cctv Camera Wv Cs564 Operating Instructions

Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Model No.      WV-CS564
Color CCTV Camera
Operating Instructions 

2
The serial number of this product may be found on the
top of the unit.
You should note the serial number of this unit in the
space provided and retain this book as a permanent
record of your purchase to aid identification in the event
of theft.
Model No. 
Serial No. 
WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOIS
TURE.
The lightning flash with arrowhead sym-
bol, within an equilateral triangle, is
intended to alert the user to the pres-
ence of...

3
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
8) Do not use near any heat sources such as radiators, heat registers, stoves or other apparatus (includ-
ing amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized...

4
• High quality picture of 768 x 494 pixels
• Minimum illumination of 2 lx (at AGC High)
• Protocol adaptability to Panasonics protocol
• A run of manual operations is memorized in
the patrol learn mode for repetitive use in
future.
• 32 preset positions
FEATURES
Panasonic presents highly advanced CCTV tech-
nology that meets the demands of new and ever-
changing applications.
This high-performance color CCTV camera is uti-
lized as a video surveillance device.
PREFACE
The camera incorporates the...

5
Camera Cleaning
Even if this function is used, noise may be produced on the monitor screen, or the preset position may be
deviated in the cause of prolonged use.
In such cases, set the refresh mode on the special menu. (See page 39.)
To use this camera with the WJ-SX550B Matrix Switcher, set the auto cleaning function on each unit side,
then clean WV-CS564 one time a day.
Preset Data Uploading or Downloading
To download the preset data from the camera to the controller or upload the downloaded data...

6
4. Do not use strong or abrasive detergents
when cleaning the camera body.
Use a dry cloth to clean the camera when it
is dirty.
When the dirt is hard to remove, use a mild
detergent and wipe gently. Care should be
taken not to scratch the dome cover when
wiping it.
Afterwards, wipe off the remained part of the
detergent in it with a dry cloth.
5. Never face the camera towards the sun.
Whether the camera is in use or not, never
aim it at the sun or other extremely bright
objects. Otherwise, blooming or...

7
yCamera Mounting Base
uPanning Starting Point
iFall Prevention Wire
oDecoration Cover
!0Dome Cover qNot Used
wNot Used
eVideo Output Connector
rData Port
tPower Cable
CONSTRUCTION
w
e
r
t q
yu
o
i
!0 

9 8
SETUP
Setup
Menu
Home
Position
SelectionSelf
Return
SettingAuto Pan
Key
SettingLocal/
Remote
Selection
Shutter
Speed
SelectionWHITE
BAL
AWC     ATW
BLC
OFF
Light 
Control
ALC/MANUAL
BLC
ON
Manual
Level
Adjustment
(Contrast)Manual
Mask
Area
Selection
INT
Manual
SelectionVD2
Automatic
SelectionManual
Level
AdjustmentManual
Level
Adjustment
V-phase
Manual
Adjustment
LL
Manual
Selection
PRESET
Menu
Camera
Menu
CAMERA ID
Editing
CAMERA ID
Display 
Position
Auto Pan
Setting
MenuImage Hold
ON/OFFCleaning...

10
Open special F2 key
The keys (switches) to use for setup are shown in the table below. The joystick on the connected con-
troller may also be used for setup. The table also shows the functions versus the operations of the individ-
ual controllers. For details, see the manual for the controller to be used. The switches and controls are
abbreviated as SW and CTRL respectively in the table.
OPERATE LOGINALARMFUNCTIONSXIRISCLOSE OPEN
NEAR FAR
WIDE TELEFOCUS
ZOOM AUTO FOCUSIRIS RESET
HOME SET UPALM...

11
Setup Menu Description
Presetting
(1) Position (POSITION SET)
Aligns the camera position and focal point by panning, tilting, zooming and focusing.
See page 17 for the setting.
(2) Preset Identification (PRESET ID)
Assigns the name for preset IDs (identification of up to 16 alphanumeric characters) and can be
switched on or off on the monitor screen.
See page 19 for the setting.
(3) Light Control (ALC/MANUAL)
Selects the ALC or MANUAL mode for adjust the lens iris.
See page 20 for the setting.
(4)...