Home
>
Panasonic
>
Network Hardware
>
Panasonic Central Processing Unit Wj Mpu955 Operating Instructions
Panasonic Central Processing Unit Wj Mpu955 Operating Instructions
Here you can view all the pages of manual Panasonic Central Processing Unit Wj Mpu955 Operating Instructions. The Panasonic manuals for Network Hardware are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
51
Camera Function Control
Camera Setup
The following function requires the use of cameras
equipped with this specific feature.
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Pressing the [STOP]button while holding down the
[SHIFT]button will open the Camera Setup Menu on
the active monitor.
The STOP indicator will light.
3. Select the desired item in the menu by moving the
Joystick Controller UPand DOWN, and then select the
desired parameter (or mode)...](http://img.usermanuals.tech/thumb/58/69467/w300_wj-mpu955_en_om_d-50.png "Page 51
51
Camera Function Control
Camera Setup
The following function requires the use of cameras
equipped with this specific feature.
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Pressing the [STOP]button while holding down the
[SHIFT]button will open the Camera Setup Menu on
the active monitor.
The STOP indicator will light.
3. Select the desired item in the menu by moving the
Joystick Controller UPand DOWN, and then select the
desired parameter (or mode)...")
51 Camera Function Control Camera Setup The following function requires the use of cameras equipped with this specific feature. 1. Select the desired monitor and camera. Refer to the Monitor Selection and Camera Selection. 2. Pressing the [STOP]button while holding down the [SHIFT]button will open the Camera Setup Menu on the active monitor. The STOP indicator will light. 3. Select the desired item in the menu by moving the Joystick Controller UPand DOWN, and then select the desired parameter (or mode)...
Page 52
![Page 52
52
Patrol Learn and Play
The following function requires the use of cameras
equipped with this specific feature.
A routine of manual operations can be stored for a specific
time and later reproduced repetitively.
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Press the [F2]button three times.
LEARN as shown in the figure will appear on the LED
display of the controller.
To save the patrol sequence, follow the procedure
shown below.
qPress the [2]button,...](http://img.usermanuals.tech/thumb/58/69467/w300_wj-mpu955_en_om_d-51.png "Page 52
52
Patrol Learn and Play
The following function requires the use of cameras
equipped with this specific feature.
A routine of manual operations can be stored for a specific
time and later reproduced repetitively.
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Press the [F2]button three times.
LEARN as shown in the figure will appear on the LED
display of the controller.
To save the patrol sequence, follow the procedure
shown below.
qPress the [2]button,...")
52 Patrol Learn and Play The following function requires the use of cameras equipped with this specific feature. A routine of manual operations can be stored for a specific time and later reproduced repetitively. 1. Select the desired monitor and camera. Refer to the Monitor Selection and Camera Selection. 2. Press the [F2]button three times. LEARN as shown in the figure will appear on the LED display of the controller. To save the patrol sequence, follow the procedure shown below. qPress the [2]button,...
Page 53
![Page 53
53
Running Sequence
Tour Sequence
The following functions are available only if a Tour
Sequence has been previously established through the
Administration Console. As described on the setup, any of
the tours can be assigned to any of the monitors.
1. Select the desired monitor.
Refer to the Monitor Selection.
2. Select the desired Tour Sequence Number by pressing
the numeric buttons.
3. Pressing the [TOUR SEQ]button will run the tour
sequence in forward direction on the active monitor.
The selected Tour...](http://img.usermanuals.tech/thumb/58/69467/w300_wj-mpu955_en_om_d-52.png "Page 53
53
Running Sequence
Tour Sequence
The following functions are available only if a Tour
Sequence has been previously established through the
Administration Console. As described on the setup, any of
the tours can be assigned to any of the monitors.
1. Select the desired monitor.
Refer to the Monitor Selection.
2. Select the desired Tour Sequence Number by pressing
the numeric buttons.
3. Pressing the [TOUR SEQ]button will run the tour
sequence in forward direction on the active monitor.
The selected Tour...")
53 Running Sequence Tour Sequence The following functions are available only if a Tour Sequence has been previously established through the Administration Console. As described on the setup, any of the tours can be assigned to any of the monitors. 1. Select the desired monitor. Refer to the Monitor Selection. 2. Select the desired Tour Sequence Number by pressing the numeric buttons. 3. Pressing the [TOUR SEQ]button will run the tour sequence in forward direction on the active monitor. The selected Tour...
Page 54
![Page 54
54
On-Screen Display Control
The procedure described below lets you determine the dis-
play, such as camera title, clock and status, on and off on
the active monitor screen.
Note:The following functions are not available when the
on-screen displays are compounded from the
Character Board that is installed on the Camera Input
Board. Confirm the setting in the Administration
Console for details.
1. Select the desired monitor.
Refer to the Monitor Selection.
2. Pressing the [1]button while holding down the...](http://img.usermanuals.tech/thumb/58/69467/w300_wj-mpu955_en_om_d-53.png "Page 54
54
On-Screen Display Control
The procedure described below lets you determine the dis-
play, such as camera title, clock and status, on and off on
the active monitor screen.
Note:The following functions are not available when the
on-screen displays are compounded from the
Character Board that is installed on the Camera Input
Board. Confirm the setting in the Administration
Console for details.
1. Select the desired monitor.
Refer to the Monitor Selection.
2. Pressing the [1]button while holding down the...")
54 On-Screen Display Control The procedure described below lets you determine the dis- play, such as camera title, clock and status, on and off on the active monitor screen. Note:The following functions are not available when the on-screen displays are compounded from the Character Board that is installed on the Camera Input Board. Confirm the setting in the Administration Console for details. 1. Select the desired monitor. Refer to the Monitor Selection. 2. Pressing the [1]button while holding down the...
Page 55
![Page 55
55
5. Pressing the [5]button while holding down the [OSD]
button will toggle the monitor status display on the
active monitor on and off.
6. Pressing the [6]button while holding down the [OSD]
button will toggle the display except clock (time and
date) on the active monitor on and off.
07/07/1999 03:37:21 PM
M AREA1 ALM T R A
C CAMERA TITLE
AUX1 OFFALM S
CAM IDT&D
AUX1 ONVLD S
NEXTPREV
S-CTL ID
STOPPAUSE
CAM MENU ON CAM MENU OFFTOUR
SEQGROUP
SEQ
MONITOR
LOCK
OSD SERVICECAM FUNC...](http://img.usermanuals.tech/thumb/58/69467/w300_wj-mpu955_en_om_d-54.png "Page 55
55
5. Pressing the [5]button while holding down the [OSD]
button will toggle the monitor status display on the
active monitor on and off.
6. Pressing the [6]button while holding down the [OSD]
button will toggle the display except clock (time and
date) on the active monitor on and off.
07/07/1999 03:37:21 PM
M AREA1 ALM T R A
C CAMERA TITLE
AUX1 OFFALM S
CAM IDT&D
AUX1 ONVLD S
NEXTPREV
S-CTL ID
STOPPAUSE
CAM MENU ON CAM MENU OFFTOUR
SEQGROUP
SEQ
MONITOR
LOCK
OSD SERVICECAM FUNC...")
55 5. Pressing the [5]button while holding down the [OSD] button will toggle the monitor status display on the active monitor on and off. 6. Pressing the [6]button while holding down the [OSD] button will toggle the display except clock (time and date) on the active monitor on and off. 07/07/1999 03:37:21 PM M AREA1 ALM T R A C CAMERA TITLE AUX1 OFFALM S CAM IDT&D AUX1 ONVLD S NEXTPREV S-CTL ID STOPPAUSE CAM MENU ON CAM MENU OFFTOUR SEQGROUP SEQ MONITOR LOCK OSD SERVICECAM FUNC...
Page 56
![Page 56
56
Alarm Control
When cameras and monitor are armed for alarm response
with an alarm inputs, the camera pictures associated with
that alarm input is displayed on the monitor when the alarm
is received.
When an alarm is received, the ALARM indicator lights. The
indicator remains lit until all alarms are cleared by pressing
the RESET button.
Alarm Arming Control
1. Select an alarm number by pressing the numeric but-
tons, followed by the [ALARM]button.
2. Pressing the [ALARM]button repeatedly will arm or...](http://img.usermanuals.tech/thumb/58/69467/w300_wj-mpu955_en_om_d-55.png "Page 56
56
Alarm Control
When cameras and monitor are armed for alarm response
with an alarm inputs, the camera pictures associated with
that alarm input is displayed on the monitor when the alarm
is received.
When an alarm is received, the ALARM indicator lights. The
indicator remains lit until all alarms are cleared by pressing
the RESET button.
Alarm Arming Control
1. Select an alarm number by pressing the numeric but-
tons, followed by the [ALARM]button.
2. Pressing the [ALARM]button repeatedly will arm or...")
56 Alarm Control When cameras and monitor are armed for alarm response with an alarm inputs, the camera pictures associated with that alarm input is displayed on the monitor when the alarm is received. When an alarm is received, the ALARM indicator lights. The indicator remains lit until all alarms are cleared by pressing the RESET button. Alarm Arming Control 1. Select an alarm number by pressing the numeric but- tons, followed by the [ALARM]button. 2. Pressing the [ALARM]button repeatedly will arm or...
Page 57
57 TROUBLESHOOTING
Page 58
The power cord insulation is damaged. 58 Troubleshooting Before asking for technical support, please check the following symptoms and their possible causes and solutions. If the solu- tions below do not solve the problem, or the symptom is not listed below, contact your installer or sales representative. Power Related Failure CPU-Related Problems SymptomPossible cause / Possible solutionReference page The power cord, connector, or power plug are hot-damaged. The power cord gets warm or hot if bent or...
Page 59
![Page 59
59
System Controller-Related Problems
CU850 controller fails to start.
LCD shows: Connecting to
Main CPU…
SymptomPossible cause / Possible solutionReference page
reference [1]
9
Check the network connection between the CPU unit and
CU850 controller. Check the controller database from the
administration tool and make sure it has the correct boot file
name. Check the controller database and make sure it has
the correct controller Ethernet address.
CU360C controller fails to dis-
play No User while power...](http://img.usermanuals.tech/thumb/58/69467/w300_wj-mpu955_en_om_d-58.png "Page 59
59
System Controller-Related Problems
CU850 controller fails to start.
LCD shows: Connecting to
Main CPU…
SymptomPossible cause / Possible solutionReference page
reference [1]
9
Check the network connection between the CPU unit and
CU850 controller. Check the controller database from the
administration tool and make sure it has the correct boot file
name. Check the controller database and make sure it has
the correct controller Ethernet address.
CU360C controller fails to dis-
play No User while power...")
59 System Controller-Related Problems CU850 controller fails to start. LCD shows: Connecting to Main CPU… SymptomPossible cause / Possible solutionReference page reference [1] 9 Check the network connection between the CPU unit and CU850 controller. Check the controller database from the administration tool and make sure it has the correct boot file name. Check the controller database and make sure it has the correct controller Ethernet address. CU360C controller fails to dis- play No User while power...
Page 60
60 Specifications Power Supply: 120 V AC 60 Hz Power Consumption: 98 W Controllable Encoders: 256 Encoders Controllable Decoders: 64 Decoders System Controller Ports: Ethernet: 10Base-T/100Base-TX, 8-conductor modular jack (x1); maximum 64 controllers (*) RS-485: 6-conductor modular jack (x12); maximum 12 controllers (*) Ethernet Ports: 10Base-T/100Base-TX 8-conductor modular jack for Encoder and Decoder control(1 port); other (1 port) RS-232C Port: 9-pin D-sub connector (x3) Ambient Operating...