Panasonic Central Processing Unit Wj Mpu955 Operating Instructions

41
Other Functions
Digital Output Function
The following function is available only if Digital Outputs has
been previously established through the Administration
Console.
1. Select a Digital Output number by pressing the numer-
ic keys.
2. Press the [DIGITAL OUT]key to produce a one shot
pulse for activating an assigned event.
Area Control Function
The following function is available only if the monitors are
previously assigned to the areas through the Administration
Console.
1. Select an Area number...

42 

43
OPERATING PROCEDURES
(with WV-CU360C) 

44
Before starting the following procedures, all system compo-
nents must be turned on.
The following procedures apply when the WV-CU360C
System Controller is connected to the system.
Log-in
1. Turn on the power switches of all system components.
2. Turn on the power of the WV-CU360C System
Controller by connecting the AC adapter to the AC out-
let.
The LINK indicator lights up and NO USER will appear
on the LED display of the system controller.
3. Select your registered operator ID number (up to 5...

45
IDs Display Function
This controller has the following functions.
Operator ID Display
Pressing the [GROUP PRESET]button while holding down
the [SHIFT]button will display the Operator ID on the LED
display.
Controller ID Display
Pressing the [PREV]button while holding down the [SHIFT]
button will display the Controller ID on the LED display.
Log-out
This function is used when an operator is leaving the con-
troller, or no longer requires access to the system.
1. Hold down the [LOGOUT]button and...

46
Monitor and Camera Selection
After log-in, the following operations are available for con-
trolling the system.
The operation begins with selecting a monitor; then select a
camera to be displayed on the active monitor screen.
Monitor Selection
1. Select the desired monitor number by pressing the
numeric buttons, then press the [MONITOR]button to
execute the selection.
The MONITOR indicator on the controller is turned on
and the selected monitor number is now displayed on
the LED display of the...

47
Priority Lock
This function is used to retain control of a monitor for an
operator, even after that operator has selected another
monitor.
Caution:This function will prevent operators with a lower
priority from gaining control of a monitor.
However, higher priority operators may still gain control
of that monitor.
Applying Priority Lock
1. Select the desired monitor to apply Priority Lock.
Refer to the Monitor Selection.
2. Pressing the [MONITOR]button while holding down
the [SHIFT]button will...

48
Controlling Camera Site Accessories
Controls for camera site accessories are located on the
right side of the front panel of the System Controller.
Included are Zoom Control, Focus Control, Iris Control,
Preset and Pan/Tilt Controls. Normally, combination cam-
eras equipped with the specific feature or a WV-RC100 or
WV-RC150 Receiver are required to utilize these functions.
Lens Control
Note:Confirm that the specified lens, with power
zoom/focus functions, is mounted on the camera. Also
confirm that...

49
Pan/Tilt Control 
(Program Preset Position)
The following function requires the use of cameras
equipped with this specific feature.
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Move the camera to the position to be preset by mov-
ing the Joystick Controller and pressing the lens control
buttons.
3. Select the desired preset position number by pressing
the numeric buttons.
4. Holding down the [PROGRAM PRESET]button, and
then press the [CAMERA...

Auxiliary Control
The following function is available only when the WV-RC100
or WV-RC150 Receivers are included in the system.
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Pressing the [2]button while holding down the [SHIFT]
button will turn on the user’s auxiliary switch 1 of the
Receiver.
Pressing the [1]button holding down the [SHIFT]but-
ton will turn off the user’s auxiliary switch 1 of the
Receiver.
3. Press the [5]button while holding down the...