Panasonic Cctv Cameras Wv Bp330 Operating Instructions

(Lens : option)
Before attempting to connect or operate this product,
please read these instructions completely.
CCTV Cameras
WV-BP330/WV-BP332/WV-BP334
FRANÇAIS
ENGLISH 

WARNING:TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The serial number of this product may be found on the top
of the unit.
You should note the serial number of this unit in the space
provided and retain this book as a permanent record of your
purchase to aid identification in the event of theft.
Model No.
Serial No.
Warning:This equipment generates and uses radio frequency energy
and if not installed and used properly, i.e., in strict accor-
dance with the...

CONTENTS
PREFACE ........................................................................................................................................................................ 2
FEATURES ...................................................................................................................................................................... 2
PRECAUTIONS...

-2-
1. The following functions are built-in.
(1) Auto Light Control (ALC)/Electronic Light
Control (ELC)
(2) Back Light Compensation (ON: Photometric
weight is given to the center of the
screen/OFF: Effective if the object is not in the
center of the screen)
(3) Various External Sync Functions, including
Gen-Lock
2. Signal-to-noise ratio of 50 dB
3. Minimum illumination of 0.08 lux (0.008 foot-can-
dle) with F1.4 lenses
4. Horizontal resolution of 570 lines
5. Shooting of shoot indoor scenes with fixed...

-3-
1. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws
or covers.
There are no user serviceable parts inside. Ask a
qualified service person for servicing.
2. Handle the camera with care.
Do not abuse the camera.  Avoid striking, shaking,
etc.  The camera could be damaged by improper
handling or storage.
3. Do not expose the camera to rain or moisture,
or try to operate it in wet areas.
Turn the power off immediately and ask a qualified
service person for...

-4-
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
WV-BP330BP330
VIDEO OUTGEN-LOCK
L
INT
AGC ON
ALC
BLC ON
VIDEO
G/L 75
VIDEO
LEVELV. PHASEH
Ω
LL
OFF
ELC
OFF
DC
Hi-Z
GND AC  24V  IN
12
VIDEO OUTGEN-LOCK
L
INT
AGC ON
ALC
BLC ON
VIDEO
G/L 75
VIDEO
LEVELV. PHASEH
Ω
LL
OFF
ELC
OFF
DC
Hi-Z
DC 12V  IN
VIDEO OUTGEN-LOCK
L
AGC ON
ALC
BLC ON
VIDEO
G/L 75
VIDEO
LEVELH
Ω
OFF
 ELC
OFF
DC
Hi-Z


 

-5-
qAuto Iris lens ConnectorThis connector is for connecting the auto iris lens
by a 4-pin male connector supplied as a standard
accessory (Part No. YFE4191J100).
wFlange-back Adjusting RingThis ring adjusts the back focal length or picture
focus. Rotate this ring clockwise for a C-mount
lens or counterclockwise for a CS-mount lens.
eLens (option)
rCamera Mounting Screw HoleThis hole for mounting the camera onto a mounting
bracket.
tPower Cord (only WV-BP330)Connect this power cord to an electrical...

-6-
!0Automatic Light Control / Electronic Light
Control Selector (ALC , ELC)
Lets you select the mode according to the lens
type that is used with this camera.
ALC:Select this mode when an auto iris lens (ALC
lens) is used with this camera.
ELC:Select this mode when a fixed iris lens or
manual iris lens is used with this camera.
!1Back Light Compensation Mode Selector (BLC
ON, OFF)
Lets you select the mode according to the position
of the object and light conditions on the screen.
BLC ON:More...

-7-
Cautions:
1. Connect to 12V DC (10.5V-16V) or 24V AC
(19.5V-28V) class 2 power supply only.
Make sure to connect the grounding lead
to the GND terminal when the power is
supplied from a 24V AC power source.
2. To prevent fire or electric shock hazard,
use a UL listed wire VW-1, style 1007 cable
for the Input Terminal.
!7Gen-lock Input Connector (GEN-LOCK) 
This connector is for connecting an external sys-
tem for synchronization. 

-8-
CONNECTIONS
A. WV-BP330 (120V AC 60Hz)
Connect the power cord to an electrical outlet of
120V AC 60Hz.
B. WV-BP332 (12V DC)
Connect the power cord to the DC 12V IN terminal
on the rear panel of the WV-BP332.
12 V DC
(10.5 V - 16 V)
Copper wire #24 #22 #20 #18size (AWG) (0.22mm2) (0.33mm2) (0.52mm2) (0.83mm2)
Resistance 0.078 0.050 0.030 0.018
Ω/m
Resistance 0.026 0.017 0.010 0.006
Ω/ft
Resistance of copper wire [at 20°C (68°F)]
•Calculation of maximum cable length between
camera and power supply :...