Panasonic Camera Recorder Ajhdx900 Operating Instructions

61
4
4-9-2 Selecting the F.AUDIO LEVEL controlfunction
This function enables the recording level to be adjusted
using the F.AUDIO LEVEL control.
To select this function, perform menu operations to open the
 screen from the VTR MENU page, and set
whether to enable or disable the F.AUDIO LEVEL controls
for the system selected as the input signals using the
FRONT VR CH1 and FRONT VR CH2 items.
Setting items and what is set
FRONT VR CH2 FRONT
W.L.
REAR
ALL
OFFFor selecting whether or not to enable the...

62
Functions which can be selected
INH:No functions are allocated.
S.GAIN: The S.GAIN function is allocated.
DS.GAIN: The DS.GAIN function is allocated.
LINE MIX: The LINE MIX GAIN (+6 dB) function is allocated.
S.IRIS: The SUPER IRIS function is allocated.  This is useful
when providing backlight compensation.
I.OVR: The IRIS override function is allocated.
This changes the target (reference) value in the auto iris
mode.
To change the target value, first establish this mode, and
then press the JOG dial...

63
4
4-9-4 Setting the color temperaturemanually
The white balance can be adjusted manually using the color
temperature settings.
The manual color temperature settings can be set
independently for PRST, A, and B with the WHITE BAL
switch.
The manual color temperatures can be set in the respective
positions of the WHITE BAL switch when color temperatures
are set in the COLOR TEMP PRE item, the AWB A TEMP
item, and the AWB B TEMP item.
Using the menu operation, open the  screen from the OPERATION page....

64
Chapter 4  Adjustments and settings for recording(continued)

LENS FILE
READ
LENS FILE
WRITE
WRITE USER
D ATAREAD USER
D ATA
LENS FILE CARD R/W
  WRITELENS FILE CARD R/W
  READ
READ FACTORY
D ATA
CARD READ/WRITE
  WRITECARD READ/WRITE
  READ
SCENE
WRITE
SCENE
READ

4-10 Set data handling
Set data file configuration
The unit employs 5 sets for the file data area.
FACTORY data:The area for storing factory settings
Data cannot be revised with menu operations.
USER data: The area for storing the data set...

65
4
4-10-2 Setup card operations
To format the setup card, save the setting data on the card
or read the saved data from the card, first perform a menu
operation to open the  screen from
the FILE page.
Formatting the setup card
#< CARD READ\bWRITE \fR.SELECT         :1\.READ
W.SELECT         :1\. WRITE
CARD CONFIG
TITLE READ
TITLE:
1: ********  5: **\.******
2: ********  6: **\.******
3: ********  7: **\.******
4: ********  8: **\.******

CONFIG? YES
#NO

CONFIG OK

1Perform the menu operations, and...

66
5Press the MENU button to exit the menu operations.
The setting menu is cleared, and the displays showing
the unit’s current statuses appear at the top and bottom
of the viewfinder screen.

Data titles cannot be recognized when the setup card
was inserted while the CARD READ/WRITE screen was
open.  Move the arrow (cursor) to the TITLE READ item,
and press the JOG dial button.
The data title is recognized, and the title is displayed.
If one of the following messages appears when the JOG dial button...

67
4
Loading the data saved on the card
1Perform the menu operations, and display the “CARD
READ/WRITE ” screen.
If the data is given a title when it is saved, the title will
also be displayed.
3Turn the JOG dial button to select any number from 1 to
8, and press the JOG dial button.
2Turn the JOG dial button to move the arrow (cursor) to
the R.SELECT item and press the JOG dial button.
Selecting the file No.
13Turn the JOG dial button to move the arrow (cursor) to
YES, and press the JOG dial button....

68
READ?YES
#NO

4Turn the JOG dial button to move the arrow (cursor) to
the READ item.
Loading the data of the selected file
< CARD READ/WRITE >\.
R.SELECT         :1
#READ
W.SELECT         :1 WRITE
CARD CONFIG
TITLE READ
TITLE:
1: ********  5: ********
2: ********  6: ********
\f: ********  7: ********
4: ********  8: ********

5When the JOG dial button is pressed, the following
message appears.
6Turn the JOG dial button to move the arrow (cursor) to
YES, and press the JOG dial button.
When the data...

69
4
3When the JOG dial button is pressed, the following
message appears.
4Turn the JOG dial button to move the arrow (cursor) to
YES, and press the JOG dial button.
The data written in the user data area of the unit’s
internal memory is now read, and the setting is
completed.
5Press the MENU button to exit the menu operations.
READ? YES
#NO

4-10-3 How to use the user data
The setting data can be written in the user data area of the
unit ’s internal memory and data written in the memory can be
read...

70
6When the JOG dial button is pressed, the following
message appears.
WRITE?YES
#NO

7Turn the JOG dial button to move the arrow (cursor) to
YES, and press the JOG dial button.
The setting data is now stored in the scene file area of
the unit ’s internal memory.
8Press the MENU button to exit the menu operations.
4Press the JOG dial button to enter the scene file.
5Turn the JOG dial button to move the arrow (cursor) to
the WRITE item.
< SCENE >
READ USER DATA
SCENE SEL         ;1READ
#WRITE
RESET...