Home > Panasonic > Camera > Panasonic Camera Recorder Ajhdx900 Operating Instructions

Panasonic Camera Recorder Ajhdx900 Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Camera Recorder Ajhdx900 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    Operating Instructions
    Camera-Recorder
    Before operating this product, please read the instructions carefully an\
    d save this manual for future use.
    
    P
    Model No.AJ- E
    
    VQT0X86
    F0706W0 -F
    @
    Printed in Japan
    ENGLISH
    
    +)%9@1@&	7259
    @&     1.  
    						
    							
    2
    indicates safety information.
    
    CAUTION
    RISK OF ELECTRIC SHOCKDO NOT OPEN
    
    CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 
    DO NOT REMOVE COVER (OR  BACK).
    NO USER SERVICEABLE PARTS INSIDE.
    REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.
    The lightning flash with arrowhead symbol,
    within an equilateral triangle, is intended to
    alert the user to the presence of uninsulated
    “dangerous voltage” within the product’s
    enclosure that may be of sufficient magnitude
    to constitute a risk of electric shock to persons.
    The exclamation point within an equilateral
    triangle is intended to alert the user to the
    presence of important operating and
    maintenance (service) instructions in the
    literature accompanying the appliance.
    
    CAUTION:
    TO REDUCE THE RISK OF FIRE OR SHOCK
    HAZARD AND ANNOYING INTERFERENCE,
    USE THE RECOMMENDED ACCESSORIES
    ONLY.
    Caution regarding laser beams
    The CCD may be damaged if it is subjected to light from a laser beam.
    When using the camera-recorder in locations where laser irradiation equi\
    pment is used, be careful not to allow
    the laser beam to shine directly on the lens.
    A rechargeable battery that is recyclable powers the product you have pu\
    rchased.
    FCC Note:
    This equipment has been tested and found to comply
    with the limits for a class A digital device, pursuant to
    Part 15 of the FCC Rules.  These limits are designed to
    provide reasonable protection against harmful
    interference when the equipment is operated in a
    commercial environment.  This equipment generates,
    uses, and can radiate radio frequency energy, and if not
    installed and used in accordance with the instruction
    manual, may cause harmful interference to radio
    communications.
    Operation of this equipment in a residential area is likely
    to cause harmful interference in which case the user will
    be required to correct the interference at his own
    expense.
    Warning:
    To assure continued FCC emission limit compliance,
    the user must use only shielded interface cables when
    connecting to external units.  Also, any unauthorized
    changes or modifications to this equipment could void
    the user’s authority to operate it.
    WARNING:
    O TO REDUCE THE RISK OF FIRE OR SHOCK
    HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO
    RAIN OR MOISTURE.
    O TO REDUCE THE RISK OF FIRE OR SHOCK
    HAZARD, KEEP THIS EQUIPMENT AWAY FROM
    ALL LIQUIDS.  USE AND STORE ONLY IN
    LOCATIONS WHICH ARE NOT EXPOSED TO THE
    RISK OF DRIPPING OR SPLASHING LIQUIDS,
    AND DO NOT PLACE ANY LIQUID CONTAINERS
    ON TOP OF THE EQUIPMENT.
    Read this first! (For AJ-HDX900P)
    
    This product contains a CR Coin Cell Lithium Battery which contains Perc\
    hlorate Material – special handling
    may apply.
    See www.dtsc.ca/gov/hazardouswaste.perchlorate.
    
    +)%9@1@&	7259
    @&     1.  
    						
    							
    3
    indicates safety information.
    $DO NOT REMOVE PANEL COVERS BY
    UNSCREWING THEM.
    To reduce the risk of electric shock, do not remove the
    covers. No user serviceable parts inside.
    Refer servicing to qualified service personnel.
    WARNING:
    O
    TO REDUCE THE RISK OF FIRE OR SHOCK
    HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO
    RAIN OR MOISTURE.
    O TO REDUCE THE RISK OF FIRE OR SHOCK
    HAZARD, KEEP THIS EQUIPMENT AWAY FROM
    ALL LIQUIDS.  USE AND STORE ONLY IN
    LOCATIONS WHICH ARE NOT EXPOSED TO THE
    RISK OF DRIPPING OR SPLASHING LIQUIDS,
    AND DO NOT PLACE ANY LIQUID CONTAINERS
    ON TOP OF THE EQUIPMENT.
    CAUTION:
    TO REDUCE THE RISK OF FIRE OR SHOCK
    HAZARD AND ANNOYING INTERFERENCE,
    USE THE RECOMMENDED ACCESSORIES
    ONLY.
    Caution regarding laser beams
    The CCD may be damaged if it is subjected to light from a laser beam.
    When using the camera-recorder in locations where laser irradiation equi\
    pment is used, be careful not to allow
    the laser beam to shine directly on the lens.
    Read this first! (For AJ-HDX900E)
    
    +)%9@1@&	7259
    @&     1.  
    						
    							
    4
    OBatteries are used for the main power source and memory back-up in the p\
    roduct.
    At the end of their useful life, you should not throw them away.
    Instead, hand them in as small chemical waste.
    O Voor de primaire voeding en het reservegeheugen van het apparaat wordt g\
    ebruikgemaakt van een
    batterij.
    Wanneer de batterij is uitgeput, mag u deze niet gewoon weggooien, maar \
    dient u deze als klein
    chemisch afval weg te doen.
    
    Attention/Attentie
    Main Power Battery (Ni-Cd Battery)
    Batterij Voor Primaire Voeding (Nikkelcadmiumbatterij)
    To remove the battery/Verwijderen van de batterij
    Back-up Battery (Lithium Battery)
    Batterij Voor Reservegeheugen (Lithiumbatterij)
    
    Anton/Bauer Battery
    Anton/Bauer-Batterij
    Unlock
    Ontgrendelingshefboom
    OIf a battery made by any other manufacturer is to be used,
    check the Operating Instructions accompanying the
    battery.
    O In geval u een batterij van een anden fabrikant zou
    gebruiken, gelieve dan eerst zorgvuldig de
    gebruiksaanwijzing van deze batterij te lezen.
    OFor the removal of the battery for disposal at the end
    of its service life, please consult your dealer.
    O Raadpleeg uw leverancier over de verwijdering van de
    batterij op het moment dat u het apparaat bij einde
    levensduur afdankt.
    Read this first! (For AJ-HDX900E)
    
    +)%9@1@&	7259
    @&     1.  
    						
    							
    5
    Contents
    Chapter 1 General  ..................................... 7
    1-1 Features of the camera unit  ......................... 7
    1-2 Features of the VTR unit  .............................. 8
    1-3 Features of the Input/Output unit  ................ 8
    1-4 Other featuresa  ............................................. 9
    1-5 Dimensions drawing  ..................................... 9
    1-6 System configuration  ................................. 10
    Chapter 2 Parts and their functions  ...... 11
    2-1 Power supply and accessory mountingsection ......................................................... 11
    2-2 Audio function section  ............................... 12
    2-3 Shooting and recording/playback function section ......................................................... 14
    2-4 Menu operation section .............................. 17
    2-5 Time code related section  .......................... 18
    2-6 Warning/status display section  ................. 19
    2-7 Display window and its displays  ............... 19
    2-8 Viewfinder section  ...................................... 21
    Chapter 3 Recording and playback  ....... 22
    3-1 Cassette tapes ............................................. 22
    3-2 Basic procedures  ........................................ 23
    3-3 Scene-to-scene continuity  ......................... 25
    3-4 To record video signals of a few seconds before starting recording 
    (PRE-RECORDING function) ....................... 26
    3-5 Recording in intervals  (INTERVAL REC function) ........................... 27
    3-6 To take the previous cut again  (RETAKE function) ...................................... 29
    3-7 To check the last few seconds of the recording (Rec-review function)  ................ 29
    3-8 Normal playback and playback at different speeds .......................................................... 29
    Chapter 4 Adjustments and settings for recording ................................ 30
    4-1 Multi Format  ................................................ 30
    4-1-1 Video system and Recording format  ............... 30
    4-1-2 Recording format on tapes and signal format at
    output connector  ............................................. 31
    4-2 Adjusting the white balance and black balance  .............................................. 32
    4-2-1 Adjusting the white balance  ............................ 32
    4-2-2 Adjusting the black balance  ............................ 34
    4-3 Setting the electronic shutter  .................... 35
    4-3-1 Shutter modes  ................................................. 35
    4-3-2 Setting the shutter mode and speed  ............... 36
    4-3-3 Setting the synchro scan mode  ....................... 36
    4-4 Selecting the audio input signals andadjusting their recording levels ................. 37
    4-4-1 Selecting the audio input signals ..................... 37
    4-4-2 Adjusting the audio signal recording levels  ..... 37
    4-4-3 CH3 and CH4 recording levels  ........................ 38
    4-5 Setting the time data ................................... 38
    4-5-1 Setting the user bits  ........................................ 38
    4-5-2 Setting the internal clock’s date and time  ........ 42
    4-5-3 Setting the time code  ...................................... 43
    4-5-4 Externally locking the time code  ...................... 43
    4-5-5 Setting the UMID information  .......................... 47
    4-6 Menu displays on the viewfinder screen ... 48
    4-6-1 Menu configuration  .......................................... 48
    4-6-2 Basic menu operations  .................................... 48
    4-6-3 Selecting the user menus  ................................ 49
    4-7 Viewfinder screen status displays  ............ 50
    4-7-1 Viewfinder lamp displays .................................. 50
    4-7-2 Viewfinder screen status display 
    configuration ..................................................... 50
    4-7-3 Selecting the viewfinder screen display  items ................................................................ 50
    4-7-4 Display modes and setting changes/adjustment result messages  .............................................. 56
    4-7-5 Setting the marker displays  ............................. 56
    4-7-6 Setting the camera ID  ..................................... 56
    4-7-7 Mode check screen displays  (MODE CHECK button function)  ..................... 57
    4-7-8 Marker check screen displays  (MARKER SELECT button function)  ............... 57
    4-8 Selection of video output signals .............. 58
    4-8-1 Settings of signals output from VIDEO OUTconnector ......................................................... 58
    4-8-2 Settings of signals output from MON OUT connector ........................................................ 60
    4-9 Menu-driven function setup  ....................... 61
    4-9-1 Setting the USER SW GAIN switching  ............ 61
    4-9-2 Selecting the F.AUDIO LEVEL control function  ................................................ 61
    4-9-3 Allocating functions to the USER MAIN, USER1 and USER2 buttons  ........................................ 62
    4-9-4 Setting the color temperature manually  .......... 63
    4-10 Set data handling  ........................................ 64
    4-10-1 Handling the setup card  .................................. 65
    4-10-2 Setup card operations  ..................................... 65
    4-10-3 How to use the user data  ................................ 69
    4-10-4 How to use the scene file data  ........................ 70
    4-10-5 Method for returning to user settings  .............. 73
    4-10-6 Method for returning to the factory settings  ..... 73
    4-10-7 Lens file  ........................................................... 74
    4-10-8 How to provide lens files  ................................. 74
    4-10-9
    To save the lens file into the built-in memory.... 75
    4-10-10
    To read the lens file from the built-in memory.... 77
    4-10-11 To write in and read out the lens file to/from the SD memory card  ............................................. 78
    Chapter 5 Preparation  ............................. 80
    5-1 Supplying the power ................................... 80
    5-1-1 Attaching the battery and setting the battery type  ..................................................... 80
    5-1-2 Use of the external DC power supply  .............. 82
    5-2 Attaching the lens and adjusting the flange back .............................................................. 83
    5-3 Adjusting the white shading of the lens ... 84
    
    +)%9@1@&	7259
    @&     1.  
    						
    							
    6
    OUniSlot is a trademark of Ikegami Tsusinki co., Ltd.
    O “DOLBY” and the double-D symbol  Îare trademarks
    of Dolby Laboratories Licensing Corporation.
    O Other names of companies and products are
    trademarks or registered trademarks of the respective
    companies.
    Contents (continued)
    5-4 Audio input signal preparations  ................ 86
    5-4-1 When using the front microphone  ................... 86
    5-4-2 When using a wireless receiver  ...................... 86
    5-4-3 When using an audio component .................... 87
    5-5 Mounting the unit on a tripod  .................... 87
    5-6 Attaching the shoulder belt  ....................... 88
    5-7 Adjusting the position of the 
    shoulder pad  ............................................... 88
    5-8 Attaching the rain cover  ............................. 88
    5-9 Attacching the FRONT AUDIO LEVEL  control knob  ................................................ 88
    5-10 Connection of the remote control unit  (AJ-RC10G) .................................................. 89
    5-11 Connection of the external switch  ............ 89
    Chapter 6 Maintenance and  inspections ............................. 90
    6-1 Inspections prior to shooting  .................... 90
    6-1-1 Preparation for inspections  ............................. 90
    6-1-2 Inspecting the camera unit  .............................. 90
    6-1-3 Inspecting the VTR unit  ................................... 91
    6-1-4 Self-diagnosis function  .................................... 92
    6-2 Maintenance ................................................ 93
    6-2-1 Condensation ................................................... 93
    6-2-2 Head cleaning .................................................. 93
    6-2-3 Cleaning inside the viewfinder  ........................ 93
    6-2-4 Phenomena inherent to CCD cameras  ........... 93
    6-2-5 Replacing the backup battery .......................... 93
    6-2-6 Connectors and signals  ................................... 94
    6-3 Warning system  .......................................... 98
    6-3-1 Warning description tables  .............................. 98
    6-3-2 Error codes  .................................................... 100
    6-3-3 Emergency eject  ........................................... 100
    Chapter 7 Menu description tables ...... 101
    7-1 Menu configfation  ..................................... 101
    7-2 SYSTEM SETTING ..................................... 102
    7-2-1 SYSTEM MODE  ............................................ 102
    7-2-2 REC FUNCTION  ........................................... 102
    7-2-3 OUTPUT SEL  ................................................ 103
    7-2-4 VIDEO OUT SETTING .................................. 103
    7-2-5 MONITOR OUT SETTING ............................ 104
    7-2-6 RC OUT SETTING ........................................ 104
    7-2-7 DOWNCON SETTING .................................. 105
    7-2-8 GENLOCK ..................................................... 105
    7-2-9 OPTION MODE  ............................................. 106
    7-3 PAINT ......................................................... 107
    7-3-1 RB GAIN CONTROL ..................................... 107
    7-3-2 RGB BLACK CONTROL ............................... 107
    7-3-3 MATRIX ......................................................... 108
    7-3-4 COLOR CORRECTION  ................................ 108
    7-3-5 LOW SETTING  ............................................. 109
    7-3-6 MID SETTING  ............................................... 110
    7-3-7 HIGH SETTING  ............................................. 110
    7-3-8 ADDTIONAL DTL  .......................................... 111
    7-3-9 SKIN TONE DTL  ........................................... 112
    7-3-10 KNEE/LEVEL ................................................ 113
    7-3-11 GAMMA ......................................................... 113
    7-3-12 CAMERA SETTING  ...................................... 114
    7-4 VF ............................................................... 115
    7-4-1 VF DISPLAYS  ............................................... 115
    7-4-2 VF MARKER  ................................................. 116
    7-4-3 VF USER BOX  .............................................. 116
    7-4-4 VF INDICATOR1  ........................................... 117
    7-4-5 VF INDICATOR2  ........................................... 117
    7-4-6 MODE CHECK IND  ....................................... 118
    7-4-7 !LED .............................................................. 118
    7-5 OPERATION ............................................... 119
    7-5-1 CAMERA ID  .................................................. 119
    7-5-2 SHUTTER SPEED  ........................................ 119
    7-5-3 SHUTTER SELECT  ...................................... 119
    7-5-4 USER SW  ..................................................... 120
    7-5-5 SW MODE  ..................................................... 121
    7-5-6 WHITE BALANCE MODE  ............................. 121
    7-5-7 USER SW GAIN  ............................................ 122
    7-5-8 LENS/IRIS ..................................................... 122
    7-6 FILE ............................................................ 123
    7-6-1 CARD READ/WRITE  .................................... 123
    7-6-2 CARD R/W SELECT  ..................................... 123
    7-6-3 LENS FILE  .................................................... 123
    7-6-4 LENS FILE CARD R/W ................................. 123
    7-6-5 SCENE .......................................................... 123
    7-6-6 INITIALIZE .................................................... 124
    7-7 MAINTENANCE ......................................... 124
    7-7-1 SYSTEM CHECK  .......................................... 124
    7-7-2 DIAGNOSTIC ................................................ 124
    7-7-3 LENS ADJ  ..................................................... 124
    7-7-4 BLACK SHADING  ......................................... 125
    7-7-5 WHITE SHADING  ......................................... 125
    7-7-6 LENS FILE ADJ ............................................ 125
    7-8 VTR MENU  ................................................. 126
    7-8-1 VTR FUNCTION  ........................................... 126
    7-8-2 BATTERY/TAPE ........................................... 126
    7-8-3 BATTERY SETTING1  ................................... 127
    7-8-4 BATTERY SETTING2  ................................... 128
    7-8-5 MIC/AUDIO1 ................................................. 129
    7-8-6 MIC/AUDIO2 ................................................. 129
    7-8-7 TC/UB ........................................................... 130
    7-8-8 UMID SET/INFO  ........................................... 131
    7-8-9 VTR DIAG  ..................................................... 131
    7-9 OPTION MENU............................................ 131
    7-9-1 OPTION ........................................................ 131
    Chapter 8 Specifications  ...................... 132
    
    +)%9@1@&	7259
    @&     1.  
    						
    							
    7
    1
    Chapter 1  General
    1-1 Features of the camera unit
    The AJ-HDX900 is a video camera-recorder that integrates an HD camera pa\
    rt equipped with a progressive scan (full pixel
    reading) 3-CCD camera unit featuring a 2/3-inch on-chip lens with a VTR\
     that in turn supports the DVCPRO HD EX format.
    The progressive scan CCD produces high quality pictures with superior im\
    age expression.
    The unit is both compact and lightweight, with minimal power consumption\
    . Featuring high picture quality and sensitivity, the
    camera-recorder has excellent mobility and effectively withstands dust, \
    humidity, and moisture. With many other superior
    functions, the unit is the optimum camera-recorder for production.
    OMulti-format
    The unit supports the following video systems by driving
    the CCD progressively. (Refer to page 30)
    O Storage type high-sensitivity function (DS. GAIN)
    The unit uses the storage type gain increase function by
    driving the CCD progressively. With this function, it is
    possible to obtain brighter pictures without increasing
    noise under low light conditions.
    This is a function that makes it possible to achieve higher
    sensitivity of up to 20 dB above the regular gain increase.
    Furthermore, this function can also be used as picture
    effects.
    O 14-bit A/D conversion digital signal processing
    Analog video signals are processed into digital data by a
    14-bit A/D converter with sampling frequencies of 74 MHz.
    It is possible to reproduce images that are more finely
    detailed.
    O Film-like Gamma function
    The unit employs three types of film-like gamma to easily
    obtain film tones accumulated through Varicam (AJ-
    HDC27 series), so that a wide range of image impressions
    can be reproduced for production. (Refer to page 113)
    O Y-get function
    By allocating functions to USER button, it is possible to
    measure the subject’s video level easily. The lens
    aperture can be adjusted precisely for appropriate
    pictures. (Refer to page 62) O
    Lens file function
    The unit has 8 lens files.
    By using an SD memory card, 64 lens files can be stored.
    (Refer to page 74)
    O Data management function
    Within the unit, one user data file and four sets of scene
    file data can be saved.
    By using an SD memory card as the setup cart, up to
    eight sets of setup data can be stored. (Refer to page 64)
    O Color bar
    The unit employs the SMPTE color bar, ARIB color bar,
    Split color bar for SNG (Satellite News Gathering) as well
    as the conventional color bar, which is useful for adjusting
    the color monitor. (Refer to page 121)
    O DRS (Dynamic Range Stretcher) function
    The dynamic range can be streched by compressing the
    video signal level of a part with high brightness where
    white-color-skipping phenomena occur during ordinary
    shooting. (Refer to page 62)
    Video system Recording format
    1080-59.94i
    1080-59.94i
    1080-29.97P
    1080-23.98P 1080-59.94i
    (2-3 Pull-down)
    1080-23.98PA 1080-59.94i(2-3-3-2 Pull-down)
    1080-50i1080-50i
    1080-25P
    720-59.94P
    720-59.94P
    720-29.97P
    720-23.98P
    720-50P720-50P
    720-25P
    
    +)%9@1@&	7259
    @&     1.  
    						
    							
    8
    1-2 Features of the VTR unit 1-3 Features of the Input/Output unit
    Chapter 1  General (continued)
    ODVCPRO HD EX format system
    The VTR unit employs the DVCPRO HD EX recording
    format.
    Using the latest compression technology, it achieves two
    times the economy of the conventional DVCPRO HD
    format.
    O PRE RECORDING function provided as a standard
    configuration
    The VTR unit employs the PRE RECORDING function as
    the standard configuration.
    Pictures and voices of up to 7 seconds prior to pressing
    the VTR REC button can be recorded. (Refer to page 26)
    O Interval REC function and ONE-SHOT Recording
    function provided as a standard configuration
    The VTR unit employs the Interval REC function and the
    ONE-SHOT Recording function as the standard
    configuration.
    With memory control, this unit makes it possible to record
    in intervals with a minimum recording time in increments
    of one frame.
    This is particularly useful for shooting science and nature
    programs.
    Furthermore, when the unit is used for one-shot recording,
    frame-by-frame shooting is easily accomplished.
    (Refer to page 27)
    O Valid frame information
    The VTR unit supports multiple formats.
    For low frame rates, valid frame information is recorded in
    the user bits etc.
    When HD SDI signals are output, valid frame information
    is also output. (Refer to page 39)
    O Input signals from four separate audio channels
    The unit enables audio input signals from four channels to
    be selected separately. Further, the level of the signal in
    each channel can be monitored on the LCD display
    window. (Refer to page 12)
    O Built-in DOLBY NR
    The CUE audio recording circuitry contains a DOLBY B
    noise reduction circuit.
    O Unislot wireless receiver
    The unit’s construction supports a slot-in wireless
    receiver, which is available as an optional accessory.
    (Refer to page 86) O
    DVCPRO (IEEE1394) output provided as a standard
    configuration
    By connecting the non-linear editor to the DVCPRO
    output connector, it is possible to shoot and edit at the
    same time to improve mobility.
    However, control signals and video/audio signals from
    devices connected to the DVCPRO connector cannot be
    received. (Refer to page 16)
    O Two-system output of HD SDI signals provided
    HD SDI outputs are provided independently for Video
    output and Monitor output.
    Since it is possible to turn ON/OFF characters and
    markers independently for the respective outputs, it can
    be used fro video monitoring by video creators or
    recording on hard disks.
    On the HD SDI output, the embedded audio and the time
    code overlap. (Refer to page 31)
    O Down converter output provided as a standard
    configuration
    The video output can be switched between HD SDI
    signals and down converter output signals (analog
    composite signals).
    It is optimum for confirming shot images on the SD
    monitor. (Refer to page 31)
    O SD SDI output provided as a standard configuration
    The video output can be switched between HD SDI
    signals and down converter output signals (serial digital
    component signals).
    It is optimum for confirming shot images on the SD
    monitor.
    On the SD SDI output, the embedded audio overlap.
    (Refer to page 31)
    O Remote control connector
    By connecting the remote control unit (AJ-RC10G), which
    is available as an optional accessory, the unit can be
    controlled remotely. (Refer to page 89)
    O Confirmation of return video signals
    It is possible to confirm the return video signals (analog
    HD-Y signals) supplied to the GENLOCK IN connector of
    this unit in the viewfinder to confirm programs.
    (Only video signals from the same video system can be
    confirmed.)
    (Refer to page 121)
    O DC OUT connector
    The DC OUT connector of the unit produces 1.5 A of
    electrical current.
    By connecting an external switch to this connector, it is
    possible to control REC start/stop.
    Since a tally lamp can be used by connecting the LED to
    this connector, it is useful for shooting video when fixing
    the camera on a crane. (Refer to page 89)
    
    +)%9@1@&	7259
    @&     1.  
    						
    							
    9
    1
    1-4 Other features
    Chapter 1  General (continued)
    OSingle action shoulder pad slide function
    It is now possible to adjust the position where the unit is
    optimally balanced for operation using a single-touch
    action. This means that the operator can easily optimize
    the unit’s balance when the lens, battery, and other
    peripheral camera devices have been installed on the
    unit. (Refer to page 88)
    O Viewfinder connection
    From the viewfinder connector of the unit, 1080-59.94i or
    1080-50i signals are output.
    Furthermore, signals are output for switching the
    frequencies of the connected viewfinder.
    Confirm images in multi formats by connecting the
    viewfinder (AJ-HVF21G), which is available as an optional
    accessory. (Refer to page 50)
    O User button
    On the side panel of the unit, three user buttons are
    available.
    For the respective buttons, it is possible to allocate
    functions that are used frequently. (Refer to page 62)
    1-5 Dimensions drawing
    Unit: mm (inch)
    
    129 (5-1/8)
    329 (13)
    62 (2-1/2)
    102 (4-
    1/16)
    204 (8-
    1/16)
    271 (10-
    11/16)
    
    +)%9@1@&	7259
    @&     1.  
    						
    							
    10
    Rain cover:
    SHAN-RC700
    Soft carrying case:
    AJ-SC900
    (not available in some
    area.)
    Hard carrying case:
    AJ-HT901GTripod adapter:
    SHAN-TM700
    V-mount type battery plate
    NP-1 type battery holder
    PROPAC14, TRIMPAC14,
    HYTRON50/100/120, 
    DIONIC90/100/160
    ENDURA7/10, BP-GL65/95
    NP-L7
    Battery
    Microphone kit:
    AJ-MC900GUniSlot wireless
    microphone receiver:
    Sennheiser EK3041
    Microphone holder:
    AJ-MH800G
    Lens
    (Bayonet type):
    Fujinon, Canon
    External DC
    power supply
    M Cassette tapes:
    AJ-HP23EMG
    AJ-HP33EMG
    Cleaning tape:
    AJ-CL12MP
    Remote control unit:
    AJ-RC10G
    2-inch electronic HD
    viewfinder:
    AJ-HVF21G
    (Mic holder provided)
    GPS unit:
    AJ-GPS900G
    (This unit is not
    available in European
    region.)
    Camera-Recorder:
    AJ-HDX900
    
    1-6 System configuration
    SD memory card
    Chapter 1  General (continued)
    
    All of the devices and accessories other than the unit, which
    are shown in this system configuration, are optionally
    available. To use these devices and accessories, refer to the
    respective operation manuals.
    
    +)%9@1@&	7259
    @&     1.  
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Camera Recorder Ajhdx900 Operating Instructions