Panasonic Camera Recorder Ajhdx900 Operating Instructions
Have a look at the manual Panasonic Camera Recorder Ajhdx900 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 106
106
Chapter 7 Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
7-2-9 OPTION MODE
ItemVariable
range Remarks
P.OFF GPS DATA HOLDCLEARFor selecting whether or not to hold the
UMID GPS position information while the
power is off and record the information as
the data still held as the previous value until
another measurement can be taken after the
power is next turned on.
HOLD:
The data is held and recorded.
CLEAR: The data is...](http://img.usermanuals.tech/thumb/58/68176/w64_ajhdx900_en_om_d-105.png "Page 106
106
Chapter 7 Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
7-2-9 OPTION MODE
ItemVariable
range Remarks
P.OFF GPS DATA HOLDCLEARFor selecting whether or not to hold the
UMID GPS position information while the
power is off and record the information as
the data still held as the previous value until
another measurement can be taken after the
power is next turned on.
HOLD:
The data is held and recorded.
CLEAR: The data is...")
![Page 107
107
7
Chapter 7 Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
7-3 PAINT
7-3-1 RB GAIN CONTROL
ItemVariable
range Remarks
R GAIN AWB PRE
–200: +000: +200
For setting the Rch gain when the WHITE
BAL switch is in the PRST position.
O If the remote control unit is connected,
settings made from the menu are
disabled. (The set value is displayed.)
SCUFR
7-3-2 RGB BLACK CONTROL
Item Variable
range Remarks
MASTER PED
–200: +015:...](http://img.usermanuals.tech/thumb/58/68176/w64_ajhdx900_en_om_d-106.png "Page 107
107
7
Chapter 7 Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
7-3 PAINT
7-3-1 RB GAIN CONTROL
ItemVariable
range Remarks
R GAIN AWB PRE
–200: +000: +200
For setting the Rch gain when the WHITE
BAL switch is in the PRST position.
O If the remote control unit is connected,
settings made from the menu are
disabled. (The set value is displayed.)
SCUFR
7-3-2 RGB BLACK CONTROL
Item Variable
range Remarks
MASTER PED
–200: +015:...")
![Page 108
108
Chapter 7 Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
7-3-3 MATRIX
ItemVariable
range Remarks
\b
MATRIX TABLEA
BFor selecting the color correction table for
the linear matrix.
SCUFR
MATRIX R-G –63: +00: +63
For performing the linear matrix adjustment.
(red/green)
MATRIX R-B –63: +00: +63
For performing the linear matrix adjustment.
(red/blue)
MATRIX G-R –63: +00: +63
For performing the linear matrix adjustment....](http://img.usermanuals.tech/thumb/58/68176/w64_ajhdx900_en_om_d-107.png "Page 108
108
Chapter 7 Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
7-3-3 MATRIX
ItemVariable
range Remarks
\b
MATRIX TABLEA
BFor selecting the color correction table for
the linear matrix.
SCUFR
MATRIX R-G –63: +00: +63
For performing the linear matrix adjustment.
(red/green)
MATRIX R-B –63: +00: +63
For performing the linear matrix adjustment.
(red/blue)
MATRIX G-R –63: +00: +63
For performing the linear matrix adjustment....")
![Page 109
109
7
Chapter 7 Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
ItemVariable
range Remarks
B (PHASE)
–63: +00: +63
For performing the hue correction for blue.
B-Cy (PHASE) –63: +00: +63
For performing the hue correction between
blue and cyan.
Cy (PHASE) –63: +00: +63
For performing the hue correction for cyan.
Cy-G (PHASE) –63: +00: +63
For performing the hue correction between
cyan and green.
G (PHASE) –63: +00: +63
For...](http://img.usermanuals.tech/thumb/58/68176/w64_ajhdx900_en_om_d-108.png "Page 109
109
7
Chapter 7 Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
ItemVariable
range Remarks
B (PHASE)
–63: +00: +63
For performing the hue correction for blue.
B-Cy (PHASE) –63: +00: +63
For performing the hue correction between
blue and cyan.
Cy (PHASE) –63: +00: +63
For performing the hue correction for cyan.
Cy-G (PHASE) –63: +00: +63
For performing the hue correction between
cyan and green.
G (PHASE) –63: +00: +63
For...")
![Page 110
110
Chapter 7 Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
\b MATRIX TABLEOFF
A
BFor selecting the color correction table for
the linear matrix.
\b COLOR
CORRECT ONOFFFor switching ON/OFF of the 12-axis
independent color correction.
7-3-6 MID SETTING
Item
Variable
range Remarks
\b
MASTER GAIN –
3dB: 6dB: 30dB
For setting the master gain to –3, 0, 3, 6, 9,
12, 15, 18, 21, 24, 27 or 30 dB.
H.DTL LEVEL 00: 08: 63
For...](http://img.usermanuals.tech/thumb/58/68176/w64_ajhdx900_en_om_d-109.png "Page 110
110
Chapter 7 Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
\b MATRIX TABLEOFF
A
BFor selecting the color correction table for
the linear matrix.
\b COLOR
CORRECT ONOFFFor switching ON/OFF of the 12-axis
independent color correction.
7-3-6 MID SETTING
Item
Variable
range Remarks
\b
MASTER GAIN –
3dB: 6dB: 30dB
For setting the master gain to –3, 0, 3, 6, 9,
12, 15, 18, 21, 24, 27 or 30 dB.
H.DTL LEVEL 00: 08: 63
For...")
![Page 111
111
7
Chapter 7 Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
7-3-8 ADDITIONAL DTL
ItemVariable
range Remarks
KNEE APE LVL OFF
1
2: 5
For changing the detail level of the high
brightness portion.
DTL GAIN(+)–31: +00: +31
For changing the + direction level of the
detail.
DTL GAIN( –) –31: +00: +31
For changing the – (below) direction level of
the detail.
DTL CLIP00: 63
For setting the level for clipping the detail
signals....](http://img.usermanuals.tech/thumb/58/68176/w64_ajhdx900_en_om_d-110.png "Page 111
111
7
Chapter 7 Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
7-3-8 ADDITIONAL DTL
ItemVariable
range Remarks
KNEE APE LVL OFF
1
2: 5
For changing the detail level of the high
brightness portion.
DTL GAIN(+)–31: +00: +31
For changing the + direction level of the
detail.
DTL GAIN( –) –31: +00: +31
For changing the – (below) direction level of
the detail.
DTL CLIP00: 63
For setting the level for clipping the detail
signals....")
![Page 112
112
Chapter 7 Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
7-3-9 SKIN TONE DTL
ItemVariable
range RemarksItemVariable
range Remarks
\b
SKIN TONE DTLOFF
A
B
ABFor selecting the skin color table for enabling
the skin tone detail.
The skin color table is provided in the SKIN
TONE TABLE item.
By enabling the skin tone detail, it is possible
to shoot human skin more accurately.
\b SKIN TONE
ZEBRA VF ONOFFFor the setting to...](http://img.usermanuals.tech/thumb/58/68176/w64_ajhdx900_en_om_d-111.png "Page 112
112
Chapter 7 Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
7-3-9 SKIN TONE DTL
ItemVariable
range RemarksItemVariable
range Remarks
\b
SKIN TONE DTLOFF
A
B
ABFor selecting the skin color table for enabling
the skin tone detail.
The skin color table is provided in the SKIN
TONE TABLE item.
By enabling the skin tone detail, it is possible
to shoot human skin more accurately.
\b SKIN TONE
ZEBRA VF ONOFFFor the setting to...")
![Page 113
113
7
Chapter 7 Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
\b WHITE CLIPON
OFFFor selecting ON/OFF of the white clip
function.
When it is set to ON, the set value for the
WHITE CLIP LVL becomes effective.
WHITE CLIP LVL 90%: 109%
For performing the white clip level setting.
7-3-10 KNEE/LEVEL
Item Variable
range Remarks
MASTER PED
–200: +015: +200
For performing the MASTER PEDESTAL
setting.
\b MANUAL KNEEON
OFFFor setting...](http://img.usermanuals.tech/thumb/58/68176/w64_ajhdx900_en_om_d-112.png "Page 113
113
7
Chapter 7 Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
\b WHITE CLIPON
OFFFor selecting ON/OFF of the white clip
function.
When it is set to ON, the set value for the
WHITE CLIP LVL becomes effective.
WHITE CLIP LVL 90%: 109%
For performing the white clip level setting.
7-3-10 KNEE/LEVEL
Item Variable
range Remarks
MASTER PED
–200: +015: +200
For performing the MASTER PEDESTAL
setting.
\b MANUAL KNEEON
OFFFor setting...")
![Page 114
114
Chapter 7 Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
ItemVariable
range Remarks
DETAILON
OFFFor switching ON/OFF of the detail signals.
HIGH COLOR ONOFFFor switching ON/OFF of the mode
enlarging the color dynamic range.
TEST SAW ONOFFFor switching ON/OFF of the test signals.
GAMMAON
OFFFor switching ON/OFF of the gamma
correction.
FLAREON
OFFFor switching ON/OFF of the flare
compensation.
H-F COMPE.ON
OFFFor switching...](http://img.usermanuals.tech/thumb/58/68176/w64_ajhdx900_en_om_d-113.png "Page 114
114
Chapter 7 Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
ItemVariable
range Remarks
DETAILON
OFFFor switching ON/OFF of the detail signals.
HIGH COLOR ONOFFFor switching ON/OFF of the mode
enlarging the color dynamic range.
TEST SAW ONOFFFor switching ON/OFF of the test signals.
GAMMAON
OFFFor switching ON/OFF of the gamma
correction.
FLAREON
OFFFor switching ON/OFF of the flare
compensation.
H-F COMPE.ON
OFFFor switching...")
![Page 115
115
7
Chapter 7 Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
RC MENU DISP.ON
OFFFor the setting to display the menu in the
viewfinder screen when the remote control
unit is connected to the unit.
7-4 VF
7-4-1 VF DISPLAY
ItemVariable
range Remarks
DISP CONDITIONNORMAL
HOLDNORMAL:
The statuses are displayed at all times.
HOLD: The statuses are displayed only when the
MODE CHECK switch is pressed.
DISP MODE 1 2
3
For setting...](http://img.usermanuals.tech/thumb/58/68176/w64_ajhdx900_en_om_d-114.png "Page 115
115
7
Chapter 7 Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
RC MENU DISP.ON
OFFFor the setting to display the menu in the
viewfinder screen when the remote control
unit is connected to the unit.
7-4 VF
7-4-1 VF DISPLAY
ItemVariable
range Remarks
DISP CONDITIONNORMAL
HOLDNORMAL:
The statuses are displayed at all times.
HOLD: The statuses are displayed only when the
MODE CHECK switch is pressed.
DISP MODE 1 2
3
For setting...")
![Page 116
116
Chapter 7 Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
7-4-2 VF MARKER
ItemVariable
range Remarks
TABLEA
BFor selecting the VF MARKER setting table.
This item is used to set the current values of
table A or B which have been selected using
the menu items listed below.
CENTER MARK OFF1
2
3
4For selecting the center marker.
OFF:
The center marker is not displayed.
1: + (large)
2: Center blank (large)
3: + (small)
4:...](http://img.usermanuals.tech/thumb/58/68176/w64_ajhdx900_en_om_d-115.png "Page 116
116
Chapter 7 Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
7-4-2 VF MARKER
ItemVariable
range Remarks
TABLEA
BFor selecting the VF MARKER setting table.
This item is used to set the current values of
table A or B which have been selected using
the menu items listed below.
CENTER MARK OFF1
2
3
4For selecting the center marker.
OFF:
The center marker is not displayed.
1: + (large)
2: Center blank (large)
3: + (small)
4:...")
111 7 Chapter 7 Menu description tables (continued) The underlining in the variable range column indicates the setting in th\ e preset mode. 7-3-8 ADDITIONAL DTL ItemVariable range Remarks KNEE APE LVL OFF 1 2: 5 For changing the detail level of the high brightness portion. DTL GAIN(+)–31: +00: +31 For changing the + direction level of the detail. DTL GAIN( –) –31: +00: +31 For changing the – (below) direction level of the detail. DTL CLIP00: 63 For setting the level for clipping the detail signals. DTL SOURCE (G+B)/2(R+G)/22G+R+B/4(3G+R)/4 R G For setting the proportion of the RGB signal components that provide the detail. SCUFR SCUFR SCUFR MASTER DTL –31: +00: +31 For revising the master detail level. SCUFR SCUFR SCUFR V DTL FREQ 360TV 450TV 540TV 630TV 720TV For selecting the vertical detail frequency. OIt is enabled when the recording format is set to 720P. SCUFR H.DTL LINE MIX 0H1H 2HFor setting the number of scanning lines to be added to the video signals in order to generate the horizontal detail signals. SCUFR +)%9@1@& 7259 @& 1.
112 Chapter 7 Menu description tables (continued) The underlining in the variable range column indicates the setting in th\ e preset mode. 7-3-9 SKIN TONE DTL ItemVariable range RemarksItemVariable range Remarks \b SKIN TONE DTLOFF A B ABFor selecting the skin color table for enabling the skin tone detail. The skin color table is provided in the SKIN TONE TABLE item. By enabling the skin tone detail, it is possible to shoot human skin more accurately. \b SKIN TONE ZEBRA VF ONOFFFor the setting to display the zebra pattern in the skin tone area displayed in the viewfinder screen. The zebra pattern is displayed when this item is turned “ON ” and the screen is opened. The zebra pattern is displayed on area A or B, which is selected in the SKIN TONE TABLE item. It is impossible to display both area A and B at the same time. SKIN DTL CORING 0: 5: 7 For setting the effect level of the skin tone detail. Y MAX 000: 190: 255 For setting the maximum value of brightness for enabling the skin tone. Y MIN 000: 010: 255 For setting the minimum value of brightness for enabling the skin tone. I CENTER 000: 035: 255 For setting the center position on the I axis (for setting an area that enables skin tone.) I WIDTH 000: 055: 255 For setting the area width for enabling the skin tone on the I-axis of which the center is the I CENTER. Q WIDTH 00: 10: 90 For setting the area width for enabling the skin tone on the Q-axis of which the center is the I CENTER Q PHASE –180: +00: +179 For setting phases of the area for enabling skin tone as setting the standard to the Q- axis. R-Y B-Y Q-WIDTHI-WIDTHQ-PHASE I-CENTER Y Y-MAX Y-MIN 0 =SKIN TONE AREA + direction – direction SCUFR SCUFR \b SKIN TONE ZEBRA VOUT ONOFFFor the setting to superimpose the zebra pattern in the skin tone area output from the VIDEO OUT connector. O When the VIDEO OUT switch is set to the SD SDI or VBS position, the zebra pattern will not be superimposed. SCUFR \b SKIN TONE ZEBRA MONI ONOFFFor the setting to superimpose the zebra pattern in the skin tone area output from the MON OUT connector. SCUFR SKIN TONE TABLEA BFor selecting the skin tone table for enabling the skin tone details. SCUFR SKIN TONE GETFor fetching the color information of A or B, which is selected in the SKIN TONE TABLE item, near the center marker. When this function is executed, data from I CENTER to Q PHASE are fetched automatically. The fetched data will be the table data of A or B, which is selected in the SKIN TONE TABLE item. It is impossible to obtain color information of both A and B at the same time. S UFR SCUFR SCUFR SCUFR SCUFR SCUFR SCUFR SCUFR Items with $in front of their names are set by the PAINT MENU SW ( $) R/W menu items on the screen. Items without $in front of their names are set by the PAINT MENU LEVEL R/W menu item. For details, refer to “7-6-2 CARD R/W SELECT. ” +)%9@1@& 7259 @& 1.
113 7 Chapter 7 Menu description tables (continued) The underlining in the variable range column indicates the setting in th\ e preset mode. \b WHITE CLIPON OFFFor selecting ON/OFF of the white clip function. When it is set to ON, the set value for the WHITE CLIP LVL becomes effective. WHITE CLIP LVL 90%: 109% For performing the white clip level setting. 7-3-10 KNEE/LEVEL Item Variable range Remarks MASTER PED –200: +015: +200 For performing the MASTER PEDESTAL setting. \b MANUAL KNEEON OFFFor setting the mode which is to be established when the AUTO KNEE switch is at OFF. The KNEE POINT/SLOPE setting value is active when ON is selected. KNEE POINT 70.0%: 93.0%: 107.0% For setting the knee point position in increments of 0.5% steps. KNEE SLOPE 00: 85: 99 For setting the inclination of the knee. A.KNEE POINT 80%: 93%: 107% For setting the auto knee point position in increments of 0.5% steps. When the OUTPUT/AUTO KNEE selection switch is set to CAM.AUTO KNEE ON, this function is enabled. A.KNEE LVL 100: 107: 109 For setting the auto knee level. A.KNEE RESPONSE 1: 4: 8 For setting the auto knee response rate. When a numerical value is larger, the response speed is slower. Items with $in front of their names are set by the PAINT MENU SW ( $) R/W menu items on the screen. Items without $in front of their names are set by the PAINT MENU LEVEL R/W menu item. For details, refer to “7-6-2 CARD R/W SELECT. ” SCUFR SCUFR SCUFR SCUFR SCUFR SCUFR SCUFR SCUFR SCUFR 7-3-11 GAMMA ItemVariable range Remarks MASTER GAMMA 0.30: 0.45: 0.75 For setting the master gamma in increments of 0.01 steps. R GAMMA –15: +00: +15 For performing the gamma setting for Rch. B GAMMA –15: +00: +15 For performing the gamma setting for Bch. GAMMA MODE SELHDSD FILM LIKE1 FILM LIKE2 FILM LIKE3For selecting the gamma mode. HD: Video gamma characteristics for HD (High Definition) SD: The gain in the dark section is higher than the HD gamma. FILM LIKE1: The cinema gamma characteristics for video applications are selected. FILM LIKE2: The cinema gamma characteristics for video applications are selected. In this setting gradations in highlit areas can be expressed better than when FILM LIKE1 is selected. FILM LIKE3: The cinema gamma characteristics for video applications are selected. In this setting gradations in highlit areas can be expressed better than when FILM LIKE2 is selected. S UFR SCUFR SCUFR SCUFR SD HD FILM LIKE1 FILM LIKE2 FILM LIKE3 Luminance Video level O When the GAMMA MODE SEL item is used for FILM LIKE3, the following settings are recommended. MANUAL KNEE : ON KNEE POINT : 85.0% KNEE SLOPE : 50 +)%9@1@& 7259 @& 1.
114 Chapter 7 Menu description tables (continued) The underlining in the variable range column indicates the setting in th\ e preset mode. ItemVariable range Remarks DETAILON OFFFor switching ON/OFF of the detail signals. HIGH COLOR ONOFFFor switching ON/OFF of the mode enlarging the color dynamic range. TEST SAW ONOFFFor switching ON/OFF of the test signals. GAMMAON OFFFor switching ON/OFF of the gamma correction. FLAREON OFFFor switching ON/OFF of the flare compensation. H-F COMPE.ON OFFFor switching ON/OFF of the aperture correction. 7-3-12 \b \b CAMERA SETTING All items in CAMERA SETTING are setting targets of the item PAINT MENU SW( $) R/W in the “7-6-2 CARD R/W SELECT ” screen. SCUFR SCUFR SCUFR SCUFR SCUFR SCUFR +)%9@1@& 7259 @& 1.
115 7 Chapter 7 Menu description tables (continued) The underlining in the variable range column indicates the setting in th\ e preset mode. RC MENU DISP.ON OFFFor the setting to display the menu in the viewfinder screen when the remote control unit is connected to the unit. 7-4 VF 7-4-1 VF DISPLAY ItemVariable range Remarks DISP CONDITIONNORMAL HOLDNORMAL: The statuses are displayed at all times. HOLD: The statuses are displayed only when the MODE CHECK switch is pressed. DISP MODE 1 2 3 For setting the display mode. This sets what is displayed in the viewfinder screen when the state of the unit is changed. For details, refer to “4-7-4 Display modes and setting changes/ adjustment result messages. ” VF OUTY NAM R G BFor selecting the video signals to display in the viewfinder screen. Y:Luminance signal NAM: The signal with the highest level among the R, G and B signals is output. R: R channel signal G: G channel signal B: B channel signal VF DTL 0: 5 For setting the detail level of the viewfinder screen. If it is set to “0 ”, it has the same detail as the main line system signals. If it is set to “5 ”, it has about double of details of the main line system signals. ZEBRA1 DETECT 0%: 70%: 109% For setting the ZEBRA1 detection level (IRE level). ZEBRA2 DETECT 0%: 85%: 109% For setting the ZEBRA2 detection level (IRE level). ZEBRA2 ONSPOT OFFFor selecting ON or OFF for ZEBRA2 or selecting SPOT. LOW LIGHT LVL OFF 10% 15% 20% 25% 30% 35%For setting how much lower the camera ’s input light quantity should be in order for “ LOW LIGHT ” to be displayed. MARKER/ CHAR LVL50% 60% 70% 80% 90% 100%For setting the brightness of markers and characters in the viewfinder screen. CUFR CUFR CUFR CUFR CUFR CUFR CUFR CUFR CUFR CUFR Zebra pattern display Video level SPOT OFF ON 109% 0% ZEBRA 2 DETECT ZEBRA 2 ZEBRA 1 DETECT +)%9@1@& 7259 @& 1.
116 Chapter 7 Menu description tables (continued) The underlining in the variable range column indicates the setting in th\ e preset mode. 7-4-2 VF MARKER ItemVariable range Remarks TABLEA BFor selecting the VF MARKER setting table. This item is used to set the current values of table A or B which have been selected using the menu items listed below. CENTER MARK OFF1 2 3 4For selecting the center marker. OFF: The center marker is not displayed. 1: + (large) 2: Center blank (large) 3: + (small) 4: Center blank (small) SAFETY MARK OFF 1 2 For selecting the type of safety marker frame. OFF:The safety marker frame is not displayed. 1: Box 2: Corner frames SAFETY AREA 80%: 90%: 100% For setting the size of the safety marker. It is possible to set the size by units of 1% with a fixed ratio between of width and height. FRAME SIG4:3 13:9 14:9 VISTAFor setting the frame marker. The VISTA setting is 16:8.65. FRAME MARK ON OFFFor selecting ON or OFF for the frame marker. FRAME LVL 0: 15 For setting the level outside the frame marker. 0:Equivalent to signal OFF (Blanking state) 15: Same brightness as center area CUFR CUFR CUFR CUFR CUFR CUFR CUFR USER BOX ON OFFFor setting whether the user box is displayed in the viewfinder or not. 7-4-3 VF USER BOX ItemVariable range Remarks USER BOX WIDTH 1: 13: 100 For setting the horizontal width of the user box. USER BOX HEIGHT1: 13: 100 For setting the vertical height of the user box. USER BOX H POS –50: +00: +50 For setting the horizontal position of the user box center. USER BOX V POS –50: +00: +50 For setting the vertical position of the user box center. CUFR CUFR CUFR CUFR CUFR O The user box can be displayed in any position as a box- type cursor. +)%9@1@& 7259 @& 1.
117 7 ItemVariable range Remarks EXTENDERON OFFFor selecting ON or OFF for the extender display. SHUTTERON OFFFor selecting ON or OFF for the shutter speed display. FILTERON OFFFor selecting ON or OFF for the filter No. display. WHITEON OFFFor selecting ON or OFF for the AWB PRE/A/B display. GAINON OFFFor selecting ON/OFF of the gain currently selected, S.GAIN, DS. GAIN and LINE MIX GAIN displays. IRIS OFF IRIS S+IRIS S OFF:Neither the super iris ON status nor the aperture value is displayed. IRIS: Only the aperture value is displayed. S+IRIS: Both the super iris ON status and aperture value are displayed. S: The super iris ON status is displayed. O The display of the aperture value and the display of the iris override are interlinked. When the iris override is changed, it is forcibly displayed for 3 seconds. CUFR CUFR CUFR CUFR CUFR CUFR ZOOM LVLON OFFFor selecting ON or OFF for the zoom position display. COLOR TEMPON OFFFor selecting ON or OFF for the color temperature display. DATE/TIME ONOFFFor selecting an option to display year/month/day and hour/minute/second simultaneously when the camera ID is displayed. ID POSITION UPPER RUPPER L LOWER R LOWER LFor setting the position to display the camera ID. UPPER R: Top right UPPER L: Top left LOWER R: Bottom right LOWER L: Bottom left CUFR CUFR CUFR CUFR SYSTEM MODEON OFFFor selecting ON or OFF for the system mode display. CUFR CAMERA MODEON OFFFor selecting ON or OFF for the camera mode display. CUFR CAMERA IDBAR OFFFor setting to record the camera ID. BAR:The camera ID is recorded when the color bar signals are recorded. OFF: It is not recorded. CUFR DRSON OFFFor selecting ON/OFF of the dynamic range stretcher mode display. CUFR Chapter 7 Menu description tables (continued) The underlining in the variable range column indicates the setting in th\ e preset mode. 7-4-4 VF INDICATOR1 7-4-5 VF INDICATOR2 Item Variable range Remarks TAPEON OFFFor selecting ON or OFF for the remaining tape amount display. BATTERYON OFFFor selecting ON or OFF for the battery voltage display. AUDIO LVLON OFFFor selecting ON or OFF for the audio level meter display. TC TCG TCR TCG/TCR OFF For selecting the time code which is to be displayed. TCG:The time code generator value is displayed in the E-E mode. TCR: For displaying the time code reader value during playback TCG/TCR: In EE mode, the time code generator value is displayed from the connectors; in playback mode, the time code reader value is displayed. OFF: The time code is not displayed at any time. VTR WARNING ALWAYSNORMAL OFFFor selecting how VTR warnings are displayed. ALWAYS:It is displayed every time a warning has occurred. NORMAL:It is displayed for 3 seconds when a warning has occurred and also for 3 seconds after recording has started and after recording has finished. OFF: It is not displayed at any time. SAVE LED SAVE& TAPE SAVE For setting the operation of the SAVE lamp. SAVE&TAPE:The lamp lights up when the VTR SAVE/STBY switch has been set to the SAVE position. It is off during recording. As the tape is approaching the end, it starts flashing in tandem with the warning alarm. SAVE: The lamp lights up when the VTR SAVE/STBY switch has been set to the SAVE position. It is off during recording. CUFR CUFR CUFR CUFR CUFR CUFR COMPRESSION ONOFFFor selecting ON/OFF of the compression mode, which is to be displayed. ON: “COMP ” will be displayed when the COMPRESSION MODE item (the VTR FUNCTION screen on the VTR MENU page) is set to DARK. OFF: It is not displayed at any time. CUFR +)%9@1@& 7259 @& 1.
118 Chapter 7 Menu description tables (continued) The underlining in the variable range column indicates the setting in th\ e preset mode. 7-4-6 MODE CHECK IND 7-4-7 !LED STATUSON OFFFor the setting to display the status screen when the MODE CHECK button is pressed. ItemVariable range Remarks !LEDON OFFFor the setting to indicate causes for turning on the lamp on the viewfinder is displayed when the MODE CHECK button is pressed. The causes for turning on the lamp are displayed with . ! FUNCTIONON OFFFor the setting to display the FUNCTION screen when the MODE CHECK button is pressed. AUDIOON OFFFor the setting to display the AUDIO screen when the MODE CHECK button is pressed. P.ON INDON OFFFor the setting to display the status screen immediately after turning on the power of the unit. Even if it is set to “ON ” in this item, the status screen is not displayed immediately after turning on the power of the unit when the STATUS item is set to OFF. CUFR CUFR CUFR CUFR CUFR Item Variable range Remarks GAIN(0dB) ONOFFFor the setting to turn the lamp on the viewfinder on when the GAIN is set to a value other than 0dB. DS.GAIN ON OFFFor the setting to turn the lamp on the viewfinder on when the DS. GAIN (cumulative gain) is activated. WHITE PRESET ONOFFFor the setting to turn the lamp on the viewfinder on when the WHITE BAL switch is set to the PRESET position. CUFR GAIN(-3dB) ONOFFFor the setting to turn the lamp on the viewfinder on when the GAIN is set to a value other than –3dB or –6dB. CUFR CUFR LINE MIX ON OFFFor the setting to turn the lamp on the viewfinder on when the LINE MIX GAIN is activated. CUFR B.GAMMA ONOFFFor the setting to turn the lamp on the viewfinder on when the BLACK GAMMA is activated. CUFR SHUTTER ONOFFFor the setting to turn the lamp on the viewfinder on when the electronic shutter is activated. CUFR EXTENDER ONOFFFor the setting to turn the lamp on the viewfinder on when the lens extender is activated. CUFR CUFR FILTER ONOFFFor the setting to turn the lamp on the viewfinder on when the filter combination is anyone other than 3200K and CLEAR. CUFR MATRIX ONOFFFor the setting to turn the lamp on the viewfinder on when the color correction table for the linear matrix is selected. CUFR COLOR CORRECTIONON OFFFor the setting to turn the lamp on the viewfinder on when the 12-axis independent color correction is selected. CUFR +)%9@1@& 7259 @& 1.
119 7 Chapter 7 Menu description tables (continued) The underlining in the variable range column indicates the setting in th\ e preset mode. 7-5-2 SHUTTER SPEED ItemVariable range Remarks SYNCHRO SCANON OFFFor selecting SYNCHRO SCAN as the shutter speed to be used. POSITION1ON OFFFor selecting POSITION1 as the shutter speed to be used. POSITION2ON OFFFor selecting POSITION2 as the shutter speed to be used. POSITION3ON OFFFor selecting POSITION3 as the shutter speed to be used. POSITION4ON OFFFor selecting POSITION4 as the shutter speed to be used. POSITION5ON OFFFor selecting POSITION5 as the shutter speed to be used. POSITION6ON OFFFor selecting POSITION6 as the shutter speed to be used. 7-5 OPERATION 7-5-1 CAMERA ID ItemVariable range Remarks ID1: **********CAMERA ID setting 1 ID2: **********CAMERA ID setting 2 ID3: **********CAMERA ID setting 3 If READ FACTORY DATA is selected, this setting will be cleared. CUFR CU F CU F CU F CUFR CUFR CUFR CUFR CUFR CUFR 7-5-3 SHUTTER SELECT ItemVariable range Remarks POSITION1 SEL For 59.94 Hz For 50 Hz 1/100 1/120 1/250 1/500 1/1000 1/2000 HALF 1/60 1/120 1/250 1/500 1/1000 1/2000 HALF For setting the shutter speed for POSITION 1. CUFR POSITION2 SEL For 59.94 Hz For 50 Hz 1/100 1/120 1/250 1/500 1/1000 1/2000 HALF 1/60 1/120 1/250 1/500 1/1000 1/2000 HALF For setting the shutter speed for POSITION 2. CUFR POSITION3 SEL For 59.94 Hz For 50 Hz 1/100 1/120 1/250 1/500 1/1000 1/2000 HALF 1/60 1/120 1/250 1/500 1/1000 1/2000 HALF For setting the shutter speed for POSITION 3. CUFR +)%9@1@& 7259 @& 1.
120 Chapter 7 Menu description tables (continued) The underlining in the variable range column indicates the setting in th\ e preset mode. ItemVariable range Remarks POSITION4 SEL For 59.94 Hz For 50 Hz 1/100 1/120 1/250 1/500 1/1000 1/2000 HALF 1/60 1/120 1/250 1/500 1/1000 1/2000 HALF For setting the shutter speed for POSITION 4. CUFR POSITION5 SEL For 59.94 Hz For 50 Hz 1/100 1/120 1/250 1/500 1/1000 1/2000 HALF 1/60 1/120 1/250 1/500 1/1000 1/2000 HALF For setting the shutter speed for POSITION 5. CUFR POSITION6 SEL For 59.94 Hz For 50 Hz 1/100 1/120 1/250 1/500 1/1000 1/2000 HALF 1/60 1/120 1/250 1/500 1/1000 1/2000 HALF For setting the shutter speed for POSITION 6. CUFR 7-5-4 USER SW Item Variable range Remarks USER MAIN SW INH S.GAIN DS.GAIN LINE MIX S.IRIS I.OVR S.BLK B.GAMMA AUDIO CH1 AUDIO CH2 REC SW Y GET RET SW PRE REC DRS For setting the function to be allocated to the USER MAIN button. For details, refer to “4-9-3 Allocating function to the USER MAIN, USER1 and USER2 buttons. CUFR USER 1 SW INH S.GAIN DS.GAIN LINE MIX S.IRIS I.OVR S.BLK B.GAMMA AUDIO CH1 AUDIO CH2 REC SW Y GET RET SW PRE REC DRS For setting the function to be allocated to the USER1 button. For details, refer to “4-9-3 Allocating function to the USER MAIN, USER1 and USER2 buttons. CUFR USER 2 SW INH S.GAIN DS.GAIN LINE MIX S.IRIS I.OVR S.BLK B.GAMMA AUDIO CH1 AUDIO CH2 REC SW Y GET RET SW PRE REC DRS For setting the function to be allocated to the USER2 button. For details, refer to “4-9-3 Allocating function to the USER MAIN, USER1 and USER2 buttons. CUFR +)%9@1@& 7259 @& 1.