Panasonic Camera Recorder Ajhdx900 Operating Instructions

101
7
Chapter 7  Menu description tables

USER MENUUSER MENU SELECT SYSTEM SETTING
PAINT
OPERATION
  SYSTEM MODE
  OUTPUT SEL
  GENLOCK  RB GAIN CONTROL
  LOW SETTING
  MID SETTING
  CAMERA ID
  SHUTTER SPEED
  SHUTTER SELECT  USER SW  SW MODE  WHITE BALANCE MODE
  LENS IRIS
  CAMERA SETTING
  USER SW GAIN  MATRIX
  RGB BLACK CONTROL
  COLOR CORRECTION
  SYSTEM(USER)
  PAINT(USER)
  VF(USER)
  OPERATION(USER)
  FILE(USER)
  MAINTENANCE(USER)
  VTR(USER)
  SKIN TONE DTL
  KNEE/LEVEL
  HIGH SETTING...

102
The underlining in the variable range column indicates the setting in th\
e preset
mode.
Chapter 7  Menu description tables (continued)
7-2 SYSTEM SETTING
7-2-1 SYSTEM MODE
ItemVariable
range Remarks
SYSTEM MODE
For AJ-HDX900E
For AJ-HDX900P1080-50i
1080-59.94i720-50P
720-59.94P
For setting the system frequency and the
recording format of the unit.
When this item is switched, turn 
“OFF ” the
POWER switch on the unit and then turn it
“ ON ” again.
O When the remote control unit (AJ-RC10G)
is...

103
7
Chapter 7  Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
7-2-3 OUTPUT SEL

CU F

CU F

CU F

CU F

ItemVariable
range Remarks
OUTPUT ITEM TC
STATUS
MENUONLY
For setting the characters superimposed on
the output signals from the VIDEO OUT
connector.
TC:Time codes are superimposed (when the
menu is accessed, the menu screen is
superimposed.)
STATUS: The characters that are the same as the
characters superimposed in the...

104
Chapter 7  Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
USER BOX WIDTH 1: 13: 100
For setting the horizontal width of the user
box.
USER BOX
HEIGHT1: 13: 100
For setting the vertical height of the user
box.
USER BOX H POS
–50: +00: +50
For setting the horizontal position of the user
box center.
USER BOX V POS –50: +00: +50
For setting the vertical position of the user
box center.
Item
Variable
range Remarks
MONI OUT...

105
7
Chapter 7  Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
7-2-7 DOWNCON SETTING
H.DTL LEVEL 00: 08: 31
For setting the horizontal detail correction
level for the down converter output signals.
V.DTL LEVEL 00: 04: 31
For setting the vertical detail correction level
for the down converter output signals.
DTL CORING 0001: 15
For setting the noise elimination level of the
details.
H.DTL FREQ. 1: 3: 5
For selecting the...

106
Chapter 7  Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
7-2-9 OPTION MODE
ItemVariable
range Remarks
P.OFF GPS DATA HOLDCLEARFor selecting whether or not to hold the
UMID GPS position information while the
power is off and record the information as
the data still held as the previous value until
another measurement can be taken after the
power is next turned on.
HOLD:
The data is held and recorded.
CLEAR: The data is...

107
7
Chapter 7  Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
7-3 PAINT
7-3-1 RB GAIN CONTROL
ItemVariable
range Remarks
R GAIN AWB PRE
–200: +000: +200
For setting the Rch gain when the WHITE
BAL switch is in the PRST position.
O If the remote control unit is connected,
settings made from the menu are
disabled. (The set value is displayed.)

SCUFR

7-3-2 RGB BLACK CONTROL
Item Variable
range Remarks
MASTER PED
–200: +015:...

108
Chapter 7  Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
7-3-3 MATRIX
ItemVariable
range Remarks
\b 
MATRIX TABLEA
BFor selecting the color correction table for
the linear matrix.

SCUFR

MATRIX R-G –63: +00: +63
For performing the linear matrix adjustment.
(red/green)
MATRIX R-B –63: +00: +63
For performing the linear matrix adjustment.
(red/blue)
MATRIX G-R –63: +00: +63
For performing the linear matrix adjustment....

109
7
Chapter 7  Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
ItemVariable
range Remarks
B (PHASE)
–63: +00: +63
For performing the hue correction for blue.
B-Cy (PHASE) –63: +00: +63
For performing the hue correction between
blue and cyan.
Cy (PHASE) –63: +00: +63
For performing the hue correction for cyan.
Cy-G (PHASE) –63: +00: +63
For performing the hue correction between
cyan and green.
G (PHASE) –63: +00: +63
For...

110
Chapter 7  Menu description tables (continued)
The underlining in the variable range column indicates the setting in th\
e preset
mode.
\b MATRIX TABLEOFF
A
BFor selecting the color correction table for
the linear matrix.
\b COLOR
CORRECT ONOFFFor switching ON/OFF of the 12-axis
independent color correction.
7-3-6 MID SETTING
Item
Variable
range Remarks
\b 
MASTER GAIN –
3dB: 6dB: 30dB
For setting the master gain to  –3, 0, 3, 6, 9,
12, 15, 18, 21, 24, 27 or 30 dB.
H.DTL LEVEL 00: 08: 63
For...