Panasonic Camera Control Unit Ak Hcu200 Operating Instructions

21
z
z INCOM/MIC ScreenThis menu is used for the unit’s intercom settings .
Configure the camera’s intercom setting on the camera .
Moving the cursor to the “INCOM/MIC” menu title and then pressing the 
SELECT dial redisplays the OPERATION menu one level up .
          I N C O M / M I C 
  4 W / R T S   I N   L E V E L                       0 d B
  4 W / R T S   O U T   L E V E L                     0 d B  R T S   C \f N C E L                                 0 d B  G \f I N   P G M...

22
z
z START UP ScreenThis menu is used to set the control that is performed when the unit’ s 
power is turned on .
Moving the cursor to the “START UP” menu title and then pressing the 
SELECT dial redisplays the MAINTENANCE menu one level up .
          S T A R T   U P 
  C A M   P O W E R                             R E M O T E
  V F   P O W E R                               R E M O T E
       indicates the factory default setting .
Item Setting 
value Remarks
CAM POWER
OFF ON
REMOTE Set the control of...

23
z
z NETWORK ScreenThis menu is used for the network settings .
Moving the cursor to the “NETWORK” menu title and then pressing the 
SELECT dial redisplays the MAINTENANCE menu one level up .
          N E T W O R K 
  I P   A D D R E S S
                                    1 9 2 . 1 6 8 . \f . 2 \f  S U B N E T   M A S K                                  2 \b \b . 2 \b \b . 2 \b \b . \f  D E F A U L T   G A T E W A Y                                      1 9 2 . 1 6 8 . \f . 1  P O R T...

24
z
z PM VIEW SETTING ScreenThis menu is used to set ON or OFF for the items (IRIS, status display) 
to display on the picture monitor  .
Moving the cursor to the “PM VIEW SETTING” menu title and then 
pressing the SELECT dial redisplays the MAINTENANCE menu one 
level up .
          P M   V I E W   S E T T I N G 
  C A M E R A   N O .                                   O N
  C A M   M O D E                                       O N  S C E N E   F I L E   N O .                           O N  S \f U T T E...

25
z
z SYSTEM ScreenThis menu is used to initialize the menu settings .
Moving the cursor to the “SYSTEM” menu title and then pressing the 
SELECT dial redisplays the MAINTENANCE menu one level up .
          S Y S T E M 
  I N I T I A L I Z E                                 N O ?
Move the cursor to INITIALIZE, press the SELECT dial, turn the 
SELECT dial to select “YES?”, and press the SELECT dial to initialize 
the menu settings .
The following data is initialized . 
 
z Items in the OPERATION menu...

26
Web settings
You can connect the unit and a computer, and configure various settings 
from the Web browser screen .
Use a LAN cable (crossover cable) to directly connect the unit’s LAN 
connector for computer connections and the computer .
Set an IP address for the computer within the private address range 
while ensuring that it is different from the address of the unit . Set the 
subnet mask to the same address as the unit .
Network settings of the unit (default settings)z
z IP address: 192 .168 .0...

27
z
z Item setting operations (settings)The current settings are displayed on the setting screen .
When you change a setting and then select the “SET” button on the 
screen, the new value is reflected on the unit .
z
z When a setting has also been changed on the unit, the value that 
was set last takes priority  .
In a case like this, there may be a discrepancy in the values set .
z
z When a setting outside the setting range is selected using 
keyboard input and the “SET” button is selected, the input...

28
z
z SETTING2 Screen
       indicates the factory default setting .
Item Setting 
value Remarks
FS DELAY
NORMAL SHORT Select the delay mode for the HD return 
signals .
NORMAL:
   
Matches return signal input that does 
not match the sync phase to the 
phase of the camera by delaying it by 
1 frame .
SHORT:
    Sets the shortest delay  . (5 H)
    However, if the following conditions 
are not met, it is delayed by  
1 frame + 5H . 
z
z HD signal
z
z The SD-HD V item in the HD/SD 
PHASE screen is...

29
z
z HD/SD PHASE ScreenThis menu is used for the HD signal and SD signal phase adjustments .
       indicates the factory default setting .
Item Setting 
value Remarks
HD H PHASE
59 .94 Hz: –1099│0
│
1099 Adjust the horizontal sync phase of 
HDTV output in respect to the sync 
signals of the system .
50 Hz:
–1319│0
│
1319
SD H PHASE
59 .94 Hz: –857│0
│
857 Adjust the horizontal sync phase of 
SDTV output in respect to the sync 
signals of the system .
50 Hz:
–863│0
│
863
SD ->HD V 
PHASE
0H
ADVANCE
0H...

30
z
z BAR ID ScreenThis menu is used to set the BAR IDs displayed on the color bars .
       indicates the factory default setting .
Item Setting 
value Remarks
BAR ID SWITCH
ON
OFF Set the display of the BAR IDs 
displayed on the color bars when the 
color bars are displayed to ON or OFF
 .
BRIGHTNESS
0% │
100% Set the character color, in units of 10 %, 
of the BAR ID displayed on the color 
bar when the color bar is displayed .
0%: (black), 100%:
 (white)
ID1 POSITION
V (vertical): 00│
05
H...