Panasonic Camera Control Unit Ak Hcu200 Operating Instructions

Operating Instructions

Camera Control Unit
	Model	No.
	AK-HCU200P
	 Model	No.
	AK-HCU200PS
	 Model	No.
	AK-HCU200E
	 Model	No.
	AK-HCU200ES
VQT4T42A	(E)M1012TY0	-FJ
ENGLISH
	 How
	the 	Operating 	Instructions 	are 	configured
  :
	 	 	
The	 	describes 	the 	procedure 	for 	connection 	with 	the 	required 	equipment 	and 	for 	installation. 	
Before 	installing 	this 	unit, 	be 	sure 	to 	take 	the 	time 	to 	read 	through 	 	to 	ensure 	that 	the 	unit 	will 	
be 	installed 	correctly.
    (this...

2
Contents
Picture monitor (PM) displays  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3
Switching the display   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3
Transition of displays   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3
Description of information displayed   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  ....

3
Picture monitor (PM) displays
Switching the display
Display the camera statuses, warnings, and other information on the 
picture monitor using the operation panel of the ROP .
Press the CHARA button of the ROP to display the desired information .
The camera statuses, warnings, and other information are cleared when 
the CHARA button of the ROP is held down .
CHARA button
ROP: AK-HRP200
Transition of displays
When trouble is detected, warning information is automatically displayed on the picture monitor...

4
Description of information displayed
„
„ WARNINGThe warning information is displayed when trouble is detected in the 
unit, camera, or optical fiber multi cable .
The warning information items are displayed top aligned .
A displayed warning information item is cleared when the status 
becomes normal .
                  -   W A R N I N G   -
                C A M   R C V   L V L   N G                C C U   R C V   L V L   N G
Warning information items
Display item
Description
CAM RCV LVL NG...

5
z
z Status displays (page 1 of 4)From the status display screen, press the CHARA button of the ROP to 
display the first page of the status displays .
  1 / 4   - S T A T U S 1 -                                                           
  C A M   N O .                                           1
  M A S T E R   G A I N                               0 \f B  5 6 0 0 \b                                           O F F  G A M M A                                           O F F  \b N E E...

6
z
z Status displays (page 3 of 4)From the status displays (page 2 of 4) screen, press the CHARA button 
of the ROP to display the third page .
  3 / 4   - S T A T U S 3 -                                                           
  D O W N C O N V E R T   M O D E                       S C
  U P C O N V E R T   M O D E                           S C  R E T U R N \f                               H D   S D I \f  R E T U R N 2                               H D   S D I 2  R E T U R N 3...

7
z
z Operation displays (manual)The operation displays appear at the bottom of the screen for 4 seconds 
when any of the following operations have been performed with the 
operation panel of the ROP  .
 
z “MASTER GAIN” is changed
 
z “SHUTTER” is changed
 
z “LENS EXT” is changed
 
z “FILTER” is changed
 
z “SCENE FILE” is changed
 
z “REF LOAD” is changed
The display time can be changed from “MAINTENANCE” menu → “PM 
OPERATION STATUS” → “STATUS DISP TIME” .
 
                  F I L T E R   F I L 1...

8
*1: [AUTO NG1 detailed information]
The AUTO NG1 detailed information is displayed flashing on the screen .
Rch OUT RANGE
Gch OUT RANGE
Bch OUT RANGE
AWB LOW LIGHT
AWB HIGH LIGHT
*2: [AUTO SETUP operation information]
The AUTO SETUP operation information is displayed on the screen .
B .SHD OPERATION
FLARE OPERATION
ABB OPERATION
AWB OPERATION
*3: [AUTO NG2 detailed information]
The AUTO NG2 detailed information is displayed flashing on the screen .
ABB Gch OUT RANGE
ABB Bch OUT RANGE
ABB Rch OUT RANGE...

9
Menu operations
While viewing the menu screen of the picture monitor, operate the 
MENU button and SELECT dial on the front panel .
MENU buttonSELECT dial
Displaying and hiding the menus
1 . Hold down the MENU buttonThe menu screen appears and the MENU button lights .
“TOP MENU” appears first .  
z If the MENU button is held down when the menu is displayed, the 
menu closes and the MENU button turns off .
Hold down the MENU button Hold down the MENU button
      T O P   M E N U
  O P E R A T I O N...

10
Changing the setting value of a setting item
A number of items and the set values are displayed on the setting 
screen at the lowest level .
1 . Turn the SELECT dial to move the cursor to the menu 
item you want to set, and then press the SELECT dial .
The setting value of the selected menu item starts flashing and you 
can change it .
          S E T T I N G 1 
  C C U   M O D E                     1 0 8 0 / 5 9 . 9 \f i
  S D I   R E T U R N 1                                 H D  S D I   R E T U R N...