Home > Panasonic > Computer Equipment > Panasonic Aj Yac150 Operating Instructions Manual

Panasonic Aj Yac150 Operating Instructions Manual

Here you can view all the pages of manual Panasonic Aj Yac150 Operating Instructions Manual. The Panasonic manuals for Computer Equipment are available online for free. You can easily download all the documents as PDF.

Page 11

11
SDTI input operations
SDTI input connector
This connector is used exclusively for SDTI input signals.
To select SDTI as the input
Select SDTI as the menu item No.600 (VIDEO IN SEL)
setting.
To select the time code
To select the time code of the SDTI input signal, set the
TC INT/EXT switch to EXT, and select SLTC or SVITC as
the menu item No.507 (EXT TC SEL) setting.

OWhen SDTI has been selected as the input signal, the
SDTI signal is selected for both the audio and video
signals.
ONo adjustments can...

Page 12

12
SDTI input operations
Formats supporting signal reception
(When the setting for SYS FORMAT at the receiving deck
matches the format selected for the data to be transmitted)
Sending
Receiving
AUDIO output
signalsVIDEO output
signalsSignals
can be
recorded
DVCPRO HD x1 speed
playback
ONAUDIO CH SELECTSHIFT ADJTC  SETSTART TC/CTLRESETTC INTTCTAPE
UBSTAND BYEDIT PLAY
REW STOPSERVOREC
FFREC INHIBITPLAYEREXT EEMODEREMOTEPUSHREV FWDRECORDERLOCALCONTROLCH 11ASMBLPREVIEW
REVIEWAUTO E DI TPREROLLTRIMAININSET...

Page 13

13
SDTI output operations
SDTI output connector
This connector is used exclusively for SDTI output signals.

OWhen playing back a tape in the DVCPRO (25 Mbps),
DVCPRO50 (50 Mbps), DVCPRO P (50 Mbps) or
DVCPRO HD (100 Mbps) format, the signals will be
output in the same format as the one in which the
recording was made on the tape.
ODV compressed signals (see 
21) will be output as the
SDTI output signals when a DV or DVCAM format tape is
played back.
ONo adjustments can be performed for the audio and...

Page 14

14
ONAUDIO CH SELECTSHIFT ADJTC  SETSTART TC/CTLRESETTC INTTCTAPE
UBSTAND BYEDIT PLAY
REW STOPSERVOREC
FFREC INHIBITPLAYEREXT EEMODEREMOTEPUSHREV FWDRECORDERLOCALCONTROLCH 11ASMBLPREVIEW
REVIEWAUTO EDI TPREROLLTRIMAININSET OUTAOUTMULTICUEINSERTVIDEOCH1/5 CH2/8 CH3/7 CH4/8 CUE TCCH 4OFF
POWERCH CONDITION ENTER ESCAPE SHIFTMETERFULL/FINEMONITOR SELECTLEVELHEADPHONESCH 1/5 CH 2/6 CH 3/7 CH 4/8 CUERECL
RPBPULL FOR VARIABLEPULL
OPENPULL
OPENCH 5CH 82345678JOGSHTLSLOWEJECTM-cassette / ADAPTERCaution: Do not...

Page 15

15
Bear in mind the following precautions when using SDTI.
OIt is possible to conduct recording operations for the SDTI
input signals but only for transmission at the x1 speed
and only in the DVCPRO HD (100 Mbps) format which
has been selected as the menu item No.020 (SYS
FORMAT) setting.
OEditing operations involving the SDTI cannot be
performed.
OSDTI dubbing cannot be conducted for tapes recorded in
the DV or DVCAM format.
OCue signals cannot be transmitted using SDTI.  To dub
them, connect a separate...

Page 16

16
Precautions for using SDTI
Source Recorder
SDTI signals
Cue signals (when cue
signals are to be dubbed)
SD_REFsignal
HD_REFsignal
Reference signal
generator
Connections using two AJ-HD150 units 

Page 17

17

OWhen SDTI has been selected as the setup menu item
No.600 (VIDEO IN SEL) setting, the selection established
by the menu item No.700 (AUDIO IN SEL) setting is
rendered invalid, and the audio setting is also fixed at the
SDTI input.
Item Setting
600 VIDEO
IN
SEL0000
0001
0002INT SG
SDISDTIFor selecting the (video) signal
which is to be input.
0: The internal signal selected by
VIDEO INT SG is generated.
1: The serial video signal which has
been input to the HD SDI IN
connector is selected.
2: The...

Page 18

18
This message appears when the
SDTI input signals are not in the
DVCPRO or DV format.
Warning messages
The following warning messages will be additionally
provided when the board has been installed in the VTR.
They are indicated on the mode display when “T&S&M” has
been selected as the setup menu item No.006 (DISPLAY
SEL) setting.
Monitor screen
display
(counter display) 
UNKNOWN 
SIGDescription Operation
Recording opera-
tions cannot be
performed.
Operation
continues.
(See 21)
Operation
continues....

Page 19


				            

Page 20

PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY
DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA
Executive Office:
3330 Cahuenga Blvd W., Los Angeles, CA 90068   (323) 436-3500
EASTERN ZONE: 
One Panasonic Way 4E-7, Secaucus, NJ 07094   (201) 348-7621
Southeast Region:
1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024   (770) 338-6835
Central Region:
1707 N Randall Road E1-C-1, Elgin, IL 60123   (847) 468-5200
WESTERN ZONE: 
3330 Cahuenga Blvd W., Los Angeles, CA 90068   (323) 436-3500...
Start reading Panasonic Aj Yac150 Operating Instructions Manual

Related Manuals for Panasonic Aj Yac150 Operating Instructions Manual

All Panasonic manuals