Panasonic Aj Yac150 Operating Instructions Manual
Have a look at the manual Panasonic Aj Yac150 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
2 The AJ-YAC150P is an SDTI interface board for the AJ-HD150. Consult your dealer before attempting to install it into the AJ-HD150. ODo not touch this product with wet hands. ODo not drop this product or subject it to strong impact. ODo not remodel this product. Doing so may cause malfunctioning. AJ-YAC150P main unit The AJ-YAC150P is an SDTI interface board for the AJ- HD150. By installing this board into the AJ-HD150, it is possible to input and output digital data using the SDTI format 21 (compression digital interface).21 SDTI (Serial Data Transport Interface) complies with the SMPTE305M standard. The data stream format complies with the SMPTE312M standard. Connection area Serial digital input connector (BNCt1) 1. Input: Dedicated SDTI input Serial digital output connector (BNCt1) 2. Output: Dedicated SDTI output Cautions Features HD SDI IN IN(OPTION) OUTHD SDTI OUT 1 OUT 2 OUT 3(SUPER)
3 Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installing the AJ-YAC150P board . . . . . . . . . . . . . . . . . . . 5 SDTI input operations . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 SDTI output operations . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Precautions for using SDTI. . . . . . . . . . . . . . . . . . . . . . . 15 Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Warning messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Contents
4 $Main unit Dimensions (WtHtD): 6˝t5-7/8˝t13/16˝ (152t148t20 mm) Weight: 0.5126 lb (233 g) $Video audio input connector Serial digital input connector: BNCt1 SDTI IN: Dedicated SDTI input connector Compliant with SMPTE305M/SMPTE321M standards. $Video audio output connector Serial digital output connector: BNCt1 SDTI OUT: Dedicated SDTI output connector Compliant with SMPTE305M/SMPTE321M standards. Specifications
5 This board must be installed in the AJ-HD150 in order for it to be used. Follow the procedure described below. Installing the AJ-YAC150P board 1.Disconnect the power cord from the main unit. Consult your dealer before attempting to install the digital video interface board. The software versions for the VTR unit need to be upgraded. Check to see if the proper versions are running. AV DV REC Ver.1.07 and up DV PB Ver.1.03 and up I/F Ver.1.04 and up FRONT Ver.1.02 and up SYSCON Ver.1.05 and up SERVO Ver.1.03 and up 2.Remove the two coin screws to remove the top panel from the main unit. Coin screws
6 Screws Installing the AJ-YAC150P board 4.Remove the nine screws to remove the rear panel. TExercise caution when handling the bundled wires from the main unit side. 3.Remove the two screws to remove the board clamp. Screws Board clamp
7 H2 Screws Connector clamp Installing the AJ-YAC150P board 5.Remove the two screws, then remove the connector clamp on the rear panel. 6.Pass the two coaxial cables through the holes in the side of the slot marked “H2” on the main unit side to the rear panel end.
8 Installing the AJ-YAC150P board Green Orange 7.Connect the coaxial cables to the BNC connectors specified on the rear panel. TTake care not to disconnect the cables which have already been attached. TPass the cables through the hole in the connector clamp, and connect them. TBundle the cables together using the binder which is packed with the board.
9 Installing the AJ-YAC150P board 9.Insert the SDTI board into the opening marked “H2” on the main unit side, and attach the rear panel using the nine screws. 8.Attach the connector clamp on the rear panel using the two screws. TTake care not to pinch the cables between the connectors and connector clamp. H2 Connector clamp Screws
10 10.Attach the board clamp using the two screws, and secure the top panel to the main unit using the two coin screws. Screws Coin screws Board clamp Installing the AJ-YAC150P board