Panasonic Aj Yac150 Operating Instructions Manual
Have a look at the manual Panasonic Aj Yac150 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11 SDTI input operations SDTI input connector This connector is used exclusively for SDTI input signals. To select SDTI as the input Select SDTI as the menu item No.600 (VIDEO IN SEL) setting. To select the time code To select the time code of the SDTI input signal, set the TC INT/EXT switch to EXT, and select SLTC or SVITC as the menu item No.507 (EXT TC SEL) setting. OWhen SDTI has been selected as the input signal, the SDTI signal is selected for both the audio and video signals. ONo adjustments can be performed for the audio and video signals in the SDTI input signals. OOnly SDTI signals in the DVCPRO HD (100 Mbps) format selected by menu item No.020 (SYS FORMAT) can be recorded. However, no guarantees can be made either for the recordings made when playback signals at a speed other than the normal (x1) speed are input or for EE pictures. (The sound is muted.)
12 SDTI input operations Formats supporting signal reception (When the setting for SYS FORMAT at the receiving deck matches the format selected for the data to be transmitted) Sending Receiving AUDIO output signalsVIDEO output signalsSignals can be recorded DVCPRO HD x1 speed playback ONAUDIO CH SELECTSHIFT ADJTC SETSTART TC/CTLRESETTC INTTCTAPE UBSTAND BYEDIT PLAY REW STOPSERVOREC FFREC INHIBITPLAYEREXT EEMODEREMOTEPUSHREV FWDRECORDERLOCALCONTROLCH 11ASMBLPREVIEW REVIEWAUTO E DI TPREROLLTRIMAININSET OUTAOUTMULTICUEINSERTVIDEOCH1/5 CH2/8 CH3/7 CH4/8 CUE TCCH 4OFF POWERCH CONDITION ENTER ESCAPE SHIFTMETERFULL/FINEMONITOR SELECTLEVELHEADPHONESCH 1/5 CH 2/6 CH 3/7 CH 4/8 CUERECL RPBPULL FOR VARIABLEPULL OPENPULL OPENCH 5CH 82345678JOGSHTLSLOWEJECTM-cassette / ADAPTERCaution: Do not insert S-cassette without adapter ONAUDIO CH SELECTSHIFT ADJTC SETSTART TC/CTLRESETTC INTTCTAPE UBSTAND BYEDIT PLAY REW STOPSERVOREC FFREC INHIBITPLAYEREXT EEMODEREMOTEPUSHREV FWDRECORDERLOCALCONTROLCH 11ASMBLPREVIEW REVIEWAUTO E DI TPREROLLTRIMAININSET OUTAOUTMULTICUEINSERTVIDEOCH1/5 CH2/8 CH3/7 CH4/8 CUE TCCH 4OFF POWERCH CONDITION ENTER ESCAPE SHIFTMETERFULL/FINEMONITOR SELECTLEVELHEADPHONESCH 1/5 CH 2/6 CH 3/7 CH 4/8 CUERECL RPBPULL FOR VARIABLEPULL OPENPULL OPENCH 5CH 82345678JOGSHTLSLOWEJECTM-cassette / ADAPTERCaution: Do not insert S-cassette without adapterDVCPRO32 SDTI Monitor Speaker (AJ-HD150 with SDTI) (AJ-HD150 with SDTI)
13 SDTI output operations SDTI output connector This connector is used exclusively for SDTI output signals. OWhen playing back a tape in the DVCPRO (25 Mbps), DVCPRO50 (50 Mbps), DVCPRO P (50 Mbps) or DVCPRO HD (100 Mbps) format, the signals will be output in the same format as the one in which the recording was made on the tape. ODV compressed signals (see 21) will be output as the SDTI output signals when a DV or DVCAM format tape is played back. ONo adjustments can be performed for the audio and video signals in the SDTI output signals. ODuring SLOW/STILL playback, unprocessed audio and video signals will be output as the SDTI output signals. If these audio and video signals are monitored on another component, they may differ from the audio and video signals which are played back on the AJ-DH150. OSDTI signals are not output when the field frequency is 60 Hz. 21 These signals comply with the IEC6134-2 standard.
14 ONAUDIO CH SELECTSHIFT ADJTC SETSTART TC/CTLRESETTC INTTCTAPE UBSTAND BYEDIT PLAY REW STOPSERVOREC FFREC INHIBITPLAYEREXT EEMODEREMOTEPUSHREV FWDRECORDERLOCALCONTROLCH 11ASMBLPREVIEW REVIEWAUTO EDI TPREROLLTRIMAININSET OUTAOUTMULTICUEINSERTVIDEOCH1/5 CH2/8 CH3/7 CH4/8 CUE TCCH 4OFF POWERCH CONDITION ENTER ESCAPE SHIFTMETERFULL/FINEMONITOR SELECTLEVELHEADPHONESCH 1/5 CH 2/6 CH 3/7 CH 4/8 CUERECL RPBPULL FOR VARIABLEPULL OPENPULL OPENCH 5CH 82345678JOGSHTLSLOWEJECTM-cassette / ADAPTERCaution: Do not insert S-cassette without adapter SDTI output operations Formats supporting signal transmission AJ-HD150 with SDTI SDTI x1 speed playback DVCPRO50 DVCPRODVCPRO50 DVCPRO P 21 DVCPRO DVCPRO DVCPRO32DVCPRO64DVCPRO96 ONAUDIO CH SELECTSHIFT ADJTC SETSTART TC/CTLRESETTC INTTCTAPE UBSTAND BYEDIT PLAY REW STOPSERVOREC FFREC INHIBITPLAYEREXT EEMODEREMOTEPUSHREV FWDRECORDERLOCALCONTROLCH 11ASMBLPREVIEW REVIEWAUTO EDITPREROLLTRIMAININSET OUTAOUTMULTICUEINSERTVIDEOCH1/5 CH2/8 CH3/7 CH4/8 CUE TCCH 4OFF POWERCH CONDITION ENTER ESCAPE SHIFTMETERFULL/FINEMONITOR SELECTLEVELHEADPHONESCH 1/5 CH 2/6 CH 3/7 CH 4/8 CUERECL RPBPULL FOR VARIABLEPULL OPENPULL OPENCH 5CH 82345678JOGSHTLSLOWEJECTM-cassette / ADAPTERCaution: Do not insert S-cassette without adapter AJ-D960 with SDTI ONAUDIO CH SELECTSHIFT ADJTC SETSTART TC/CTLRESETTC INTTCTAPE UBSTAND BYEDIT PLAY REW STOPSERVOREC FFREC INHIBITPLAYEREXT EEMODEREMOTEPUSHREV FWDRECORDERLOCALCONTROLCH 11ASMBLPREVIEW REVIEWAUTO E DI TPREROLLTRIMAININSET OUTAOUTMULTICUEINSERTVIDEOCH1/5 CH2/8 CH3/7 CH4/8 CUE TCCH 4OFF POWERCH CONDITION ENTER ESCAPE SHIFTMETERFULL/FINEMONITOR SELECTLEVELHEADPHONESCH 1/5 CH 2/6 CH 3/7 CH 4/8 CUERECL RPBPULL FOR VARIABLEPULL OPENPULL OPENCH 5CH 82345678JOGSHTLSLOWEJECTM-cassette / ADAPTERCaution: Do not insert S-cassette without adapter AJ-PD950 AJ-D950 with SDTI ONAUDIO CH SELECTSHIFT ADJTC SETSTART TC/CTLRESETTC INTTCTAPE UBSTAND BYEDIT PLAY REW STOPSERVOREC FFREC INHIBITPLAYEREXT EEMODEREMOTEPUSHREV FWDRECORDERLOCALCONTROLCH 11ASMBLPREVIEW REVIEWAUTO E DI TPREROLLTRIMAININSET OUTAOUTMULTICUEINSERTVIDEOCH1/5 CH2/8 CH3/7 CH4/8 CUE TCCH 4OFF POWERCH CONDITION ENTER ESCAPE SHIFTMETERFULL/FINEMONITOR SELECTLEVELHEADPHONESCH 1/5 CH 2/6 CH 3/7 CH 4/8 CUERECL RPBPULL FOR VARIABLEPULL OPENPULL OPENCH 5CH 82345678JOGSHTLSLOWEJECTM-cassette / ADAPTERCaution: Do not insert S-cassette without adapter AJ-D850 with SDTI ONAUDIO CH SELECTSHIFT ADJTC SETSTART TC/CTLRESETTC INTTCTAPE UBSTAND BYEDIT PLAY REW STOPSERVOREC FFREC INHIBITPLAYEREXT EEMODEREMOTEPUSHREV FWDRECORDERLOCALCONTROLCH 11ASMBLPREVIEW REVIEWAUTO E DI TPREROLLTRIMAININSET OUTAOUTMULTICUEINSERTVIDEOCH1/5 CH2/8 CH3/7 CH4/8 CUE TCCH 4OFF POWERCH CONDITION ENTER ESCAPE SHIFTMETERFULL/FINEMONITOR SELECTLEVELHEADPHONESCH 1/5 CH 2/6 CH 3/7 CH 4/8 CUERECL RPBPULL FOR VARIABLEPULL OPENPULL OPENCH 5CH 82345678JOGSHTLSLOWEJECTM-cassette / ADAPTERCaution: Do not insert S-cassette without adapter 21The DVCPRO P format is used only with the AJ-PD950. Sending (AJ-HD150 with SDTI) DVCPRO HD
15 Bear in mind the following precautions when using SDTI. OIt is possible to conduct recording operations for the SDTI input signals but only for transmission at the x1 speed and only in the DVCPRO HD (100 Mbps) format which has been selected as the menu item No.020 (SYS FORMAT) setting. OEditing operations involving the SDTI cannot be performed. OSDTI dubbing cannot be conducted for tapes recorded in the DV or DVCAM format. OCue signals cannot be transmitted using SDTI. To dub them, connect a separate cable for use with these signals. In this case, the selection established by the menu item No.730 (REC CUE) setting is rendered invalid, and the setting is fixed at the cue signal input. ONo guarantees are made for the video signal output when a tape on which SLOW playback signals have been input by SDTI and recorded is replayed in the SLOW mode. (The sound is muted.) Precautions for using SDTI
16 Precautions for using SDTI Source Recorder SDTI signals Cue signals (when cue signals are to be dubbed) SD_REFsignal HD_REFsignal Reference signal generator Connections using two AJ-HD150 units
17 OWhen SDTI has been selected as the setup menu item No.600 (VIDEO IN SEL) setting, the selection established by the menu item No.700 (AUDIO IN SEL) setting is rendered invalid, and the audio setting is also fixed at the SDTI input. Item Setting 600 VIDEO IN SEL0000 0001 0002INT SG SDISDTIFor selecting the (video) signal which is to be input. 0: The internal signal selected by VIDEO INT SG is generated. 1: The serial video signal which has been input to the HD SDI IN connector is selected. 2: The serial compressed signal which has been input to the SDTI IN connector is selected. No.Super- imposed displayNo.Super- imposed displayDescription of setting The underlining above indicates the factory settings. USER menu Setup menu When the board is installed in the VTR, the setup menu shown below can be used.
18 This message appears when the SDTI input signals are not in the DVCPRO or DV format. Warning messages The following warning messages will be additionally provided when the board has been installed in the VTR. They are indicated on the mode display when “T&S&M” has been selected as the setup menu item No.006 (DISPLAY SEL) setting. Monitor screen display (counter display) UNKNOWN SIGDescription Operation Recording opera- tions cannot be performed. Operation continues. (See 21) Operation continues. (See 22) Operation continues. (See 23) This message appears when the compressed video signals in the SDTI input signals are irregular signals. This message appears when the audio signals in the SDTI input signals are irregular signals. This message appears when the time code signal in the SDTI input signals is an irregular signal. INVALID VIDEO SIG INVALID AUDIO SIG INVALID TC SIG Recording opera- tions cannot be performed.This message appears when the format of the SDTI input signals does not match the SYS format. NO MATCH SIG Recording opera- tions cannot be performed.This message appears when the SDTI input signals are not x1 speed transfer signals in the DVCPRO HD (100 Mbps) format. NOT1t t 100M SIG 21This warning appears only when a recording operation is in progress. When it appears, nothing will be recorded on the tape and only the erasure operation will be performed. 22This warning appears only when a recording operation is in progress. When it appears, the audio signals will be muted and recorded. 23This warning appears only when a full EE operation with the REC button pressed is in progress.
PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Southeast Region: 1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024 (770) 338-6835 Central Region: 1707 N Randall Road E1-C-1, Elgin, IL 60123 (847) 468-5200 WESTERN ZONE: 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500 Government Marketing Department: 52 West Gude Drive, Rockville, MD 20850 (301) 738-3840 Broadcast PARTS INFORMATION & ORDERING: 9:00 a.m. – 5:00 p.m. (EST) (800) 334-4881/24 Hr. Fax (800) 334-4880 Emergency after hour parts orders (800) 334-4881 TECHNICAL SUPPORT: Emergency 24 Hour Service (800) 222-0741 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-5010 Panasonic de Mexico S.A. de C.V. Av angel Urraza Num. 1209 Col. de Valle 03100 Mexico, D.F. (52) 1 951 2127 Panasonic Sales Company Division of Matsushita Electric of Puerto Rico Inc. San Gabriel Industrial Park, 65th Infantry Ave., Km. 9.5, Carolina, Puerto Rico 00630 (787) 750-4300