Panasonic Aj Rc10g Operating Instructions Manual

							E-30
ENGLISH
Menu item (Continued)
SKIN DTL (Continued)FUNC
LayerItemVariable 
rangeContents descriptionStorage
5ICENT0
 :
255To set the center 
position on the I-axis (to 
set the area where 
SKIN TONE is effective)
Yes
IWIDTH0
 :
255To set the width of the 
area where SKIN TONE 
on the I-axis with the 
center position at I 
CENT is effective
6
QWIDTH0
 :
255To set the width of the 
area where SKIN TONE 
on the Q-axis with the 
center position at I 
CENT is effective
Yes
QPHASE–128
    :
+127To set the phase of the 
area where SKIN TONE 
having a standard on 
the Q-axis is effective
7
SKIN-GETEXECThis will be used for 
obtaining the color 
phase as the target for 
SKIN TONE DTLNo
LayerItemVariable 
rangeContents descriptionStorage
1IRISLVL0
 :
100To set the target value 
of the auto iris
Yes
PEAK/AVE0
 :
100To determine the 
accounting ratio of the 
peak against the 
standard of the auto iris
2
IRIS-
WINDOWNORM1
NORM2
CENTERTo select the auto iris 
detection window
NORM1: Center of the 
screen
NORM2: Bottom side of 
the screen
CENTR: Spots at the 
center of the 
screenYes
3
IRISGAINCAM
LENSTo select whether the 
iris gain is adjusted on 
the camera recorder or 
the lens
Yes
GAINVAL1
 :
20To set the IRIS GAIN 
adjustment value on the 
camera recorder
4
USER-SWUSW-M
USW-1
USW-2To select the USER 
switch where functions 
will be changed
Yes
SELECTINH
S/GAIN
DS.GAIN
LINE MIX
S.IRIS
I.OVR
S.BLK
B.GAMMAAUDI O CH1
AUDI O CH2
REC SW
Y GET
RET SW
PRE REC
DRS
To select the function to 
be assigned to the 
USER button selected 
in the USER-SW item

When the unit is 
connected to the 
camera recorder, the 
“I.OVR” operation  is 
disabled.
AJ-RC10G.book  30 ページ  ２００６年７月２６日　水曜日　午前９時２５分 
						

							E-31
Menu item (Continued)
FUNC (Continued)SYSTEM
           is the factory setting
LayerItemVariable 
rangeContents descriptionStorage
5BLK-
GAMMA–3
–2
–1
OFF
1
2
3To set the gamma curve 
for dark portions
Yes
6
RC-DATA-
SAVEON
OFFTo select whether the 
value adjusted in the 
unit will be retained in 
the main unit of the 
camera recorder or not, 
when the unit is 
removed from the 
camera recorder
When this is set to OFF 
and the unit is removed, 
the settings for the 
camera recorder will 
return to the state 
before connecting the 
unit.Yes
LayerItemVariable 
rangeContents descriptionStorage
1CARD-
READ1
 :
8To select the file 
number to be read out
No
TITLE¢¢¢¢¢
¢¢¢To read out the title 
applied to the data of 
the file to be read out, 
and display it
2
CARD-
WRITE1
 :
8To select the file 
number to be written
No
TITLE¢¢¢¢¢
¢¢¢To enter the title applied 
to the data of the file to 
be written
3
CARD-
DELETE1
 :
8To select the file 
number to be deleted
No
TITLE¢¢¢¢¢
¢¢¢To read the title applied 
to the data of the file to 
be deleted, and display 
it
4
CARD-
CONFIGTo configure the card
No
5
BUZZERONOFFTo select whether the 
buzzer is turned on 
when the switch for the 
lamp to turn on is 
pressedNo
6
LCD 
CONTRAST0
 :
10
 :
15
To adjust the contrast of 
the LCD panel
No
7
SW BRIGHT0
 :
10
 :
15
To adjust the brightness 
of the lamp for the 
switchNo
8
RCU-
FAC T RYTo return the volume 
variable range of the 
unit to the factory 
settingsNo
9
VERSIONTo display the version of 
the software for the unitNo
AJ-RC10G.book  31 ページ  ２００６年７月２６日　水曜日　午前９時２５分 
						

							E-32
ENGLISH
Connection cable
A 10 m connection cable is attached to the unit. To extend the cable, use the optional dedicated cable.
If several 10 m cables are connected in tandem, the power supply may be unstable due to voltage 
drops etc.
In an emergency, apply a higher voltage within a range from 11 V to 17 V for the power supply of DC 12 
V to the camera recorder. If the input voltage to the unit is 8 V or less, operation becomes unstable.
Refer to the following. A twisted-pair cable must be used for the control line of the 10-pin cable. 
Attenuation of the coaxial cable must be set to around –6 dB at maximum in 10 MHz.
Confirmation of software version
The software version for this unit can be confirmed in “VERSION” under SYSTEM in the unit menu.
Confirm for questions.
1
2
3
4
5
6
7
8
9
101
2
3
4
5
6
7
8
9
10
Camera recorder side
HR10A-10P-10P (Hirose Electric)Controller side
HR10A-10P10S (Hirose Electric)
Twisted pair
Twisted pair CAM DATA (H)
CAM DATA (C)
CAM CONT (H)
CAM CONT (L)
ECU_ON
Video output
GND (Video)
Standby
+12 V (IN)
GND
Connector GNDCAM DATA (H)
CAM DATA (C)
CAM CONT (H)
CAM CONT (L)
ECU_ON
Video input
GND (Video)
Standby
+12 V (IN)
GND
Connector GND 1.5C - 2V
3 
h or less
3 
h or less
AJ-RC10G.book  32 ページ  ２００６年７月２６日　水曜日　午前９時２５分 
						

							E-33
Specifications
 indicates safety items.
External dimensions (W a H a D)
185 mm a 131 mm a 60 mm
(7-5/16 inches a 5-3/16 inches a 
2-5/8 inches)
Weight
1.3 kg (2.87 lb)
Operating temperature
0 °C to +40 °C (32 °F to 104 °F)
Storage temperature
–20 °C to +60 °C (–4 °F to 140 °F)
Maximum cable length
50 m
[Input/Output]
CAMERA
10-pin multi-connector a 1
MONITOR
BNC a 1, 1 VP-P (for menu setting)
Please note that specifications and appearance are 
subject to change, for improvement purpose, 
without notice.
Power supply: DC 12 V
Power consumption: 6 W
AJ-RC10G.book  33 ページ  ２００６年７月２６日　水曜日　午前９時２５分 
						

							E-34
ENGLISH
Information on Disposal for Users of Waste Electrical & Electronic Equipment (private
households)
This symbol on the products and/or accompanying documents means that used electrical
and electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to designated
collection points,where they will be accepted on a free of charge basis. Alternatively, in
some countries you may be able to return your products to your local retailer upon the
purchase of an equivalent new product.
Disposing of this product correctly will help to save valuable resources and prevent any
potential negative effects on human health and the environment which could otherwise
arise from inappropriate waste handling.  Please contact your local authority for further
details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with
national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for
further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct
method of disposal.
AJ-RC10G.book  34 ページ  ２００６年７月２６日　水曜日　午前９時２５分 
						

							PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY
UNIT COMPANY OF PANASONIC CORPORATION OF NORTH AMERICA
Executive Office:
One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000
EASTERN ZONE:
One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7196
Southeast Region: (201) 348-7162
WESTERN ZONE:
3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500
Government Marketing Department:
One Panasonic Way 2E-10, Secaucus, NJ 07094 (201) 348-7587
Broadcast PARTS INFORMATION & ORDERING:
9:00 a.m. – 5:00 p.m. (EST) (800) 334-4881/24 Hr. Fax (800) 334-4880
Emergency after hour parts orders (800) 334-4881
TECHNICAL SUPPORT:
Emergency 24 Hour Service (800) 222-0741
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-5010
Panasonic de Mexico S.A. de C.V.
Av angel Urraza Num. 1209 Col. de Valle 03100 Mexico, D.F. (52) 1 951 2127
Panasonic Puerto Rico Inc.
San Gabriel Industrial Park, 65th Infantry Ave., Km. 9.5, Carolina, Puerto Rico 00630 (787) 750-4300