Panasonic Aj Rc10g Operating Instructions Manual

Remote Control Unit/Fernsteuereinheit/
Module de télécommande/
Unità per il comando a distanza/Unidad de control remote/
摄像机遥控器 

E-1
Read this first!
For General
 indicates safety information.
CAUTION:
TO REDUCE THE RISK OF FIRE OR
SHOCK HAZARD AND ANNOYING
INTERFERENCE, USE THE
RECOMMENDED ACCESSORIES ONLY.
WARNING:
zTO REDUCE THE RISK OF FIRE OR
SHOCK HAZARD, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
MOISTURE.
zTO REDUCE THE RISK OF FIRE OR
SHOCK HAZARD, KEEP THIS
EQUIPMENT AWAY FROM ALL
LIQUIDS. USE AND STORE ONLY IN
LOCATIONS WHICH ARE NOT
EXPOSED TO THE RISK OF DRIPPING
OR SPLASHING LIQUIDS, AND DO
NOT PLACE ANY LIQUID...

E-2
ENGLISH
Read this first! (Continued)
For USA
 indicates safety information.
FCC Note:
This equipment has been tested and found
to comply with the limits for a class A digital
device, pursuant to Part 15 of the FCC
Rules.  These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment.  This
equipment generates, uses, and can radiate
radio frequency energy, and if not installed
and used in accordance with the...

E-3
Table of Contents
Read this first! ................................ 1
General ............................................ 4
Features .......................................... 4
Accessories .................................... 4
Connection...................................... 5
System configuration..................... 5
Parts and functions ........................ 6
Front panel ........................................ 6
Rear panel ....................................... 15
Basic operations...

E-4
ENGLISH
General
The AJ-RC10G (hereinafter called “the unit”) is a remote control unit connected to the camera recorder.
The unit controls the camera recorder from the controller and is capable of changing numerical values 
in the menu. Coverage can be extended by 50m by using the dedicated cable.
Features
zFor some frequently functions on the camera unit, dedicated switches are provided for direct 
operation.
zBy switching to the recorder mode, the camera recorder can be controlled directly through...

E-5
Connection
1
While the power supply of the camera 
recorder is turned off, connect the RCU 10-
pin connector of the camera recorder to the 
unit with the connection cable.
If settings are made from the camera menu, 
set the frequency to the frame frequency of 
the camera recorder and connect an NTSC 
or PAL monitor.
2After turning on the camera recorder power, 
turn the unit power on.

zThe frame frequency of the camera recorder 
must be switched before connecting the unit to 
the camera recorder.
At...

E-6
ENGLISH
Parts and functions
Front panel
Panel part
!1POWER button
ON/OFF switch of the main power supply of 
the main unit
!2PANEL ACTIVE button
For controlling which panel operations are 
available
When the lamp is on:
The panel operations are available. 
When the power is on, the unit is on.
When the lamp is off:
Only the POWER button and the PANEL 
ACTIVE button are available; all other 
button operations are disabled.
Turning on the self-lighting buttons and the 
LED display, which indicate the...

E-7
Parts and functions (Continued)
Camera recorder/Scene file operation
!1RECORDER ENABLE button
For switching between the recorder mode 
and the scene file mode
When the lamp is on:
Recorder mode
Buttons from !3 to !8 are operated as 
control buttons for the recording.
When the lamp is off:
Scene file mode
Buttons from !3 to !8 are operated as the 
buttons for reading and storing scene 
files. When the power is turned on, the 
unit is in this state.
!2REC.INH/LOAD button
In recorder mode:
When the lamp...

E-8
ENGLISH
Parts and functions (Continued)
!7CHECK/5-button
In recorder mode:
This is the recording confirmation button. If 
the button is pressed when recording is 
paused, the recording can be checked.
The lamp flashes when the tape is rewound 
and is turned on when the tape is replayed.
In scene file mode:
5 is selected as the number for the scene 
file to be saved or loaded.
!8REC S/S / SAVE button
In recorder mode:
This is the start/stop button for recording.
This button is operated in the same way...

E-9
Parts and functions (Continued)
Basic camera operations
!1USER MAIN button
This button has the same function as the 
USER MAIN switch on the camera recorder. 
The lamp is on only when the button is 
pressed.

Functions assigned to the USER MAIN 
button are selected in the menu of the 
camera recorder or the unit.
!2USER1 button
This button has the same function as the 
USER1 switch on the camera recorder. The 
lamp is on only when the button is pressed.

Functions assigned to the USER1 button 
are...