Panasonic Aj Rc10g Operating Instructions Manual

E-20
ENGLISH
Basic operation (Continued)

zIf a scene file is loaded while the volume 
operation mode is set to the absolute value 
mode, and then the VR ACTIVE button is 
operated, the set value will correspond to 
the volume angle and the loaded value will 
be lost.
If you want to operate the volume from the 
value loaded in the scene file, operate the 
unit while the VR ACTIVE button lamp is 
flashing or the operation modes of the 
volumes for WHITE and BLACK are set to 
the relative value mode before...

E-21
Saving/Loading of scene files onto the SD memory card
It is possible to store up to 8 sets of settings for 
the unit.
While data on the card are read or written, any 
operation of the unit panel is inhibited. Insert the 
SD memory card into the SD memory card slot 
on the unit and operate the unit menu.

zUse an SD memory card with a capacity of 8 
MB or more. The maximum capacity of an SD 
card that can be used on the unit is 2 GB.
zThe SD memory card must be formatted on 
the unit.
Handling...

E-22
ENGLISH
Saving/Loading of scene files onto the SD memory card (Continued)
To write data on the card
1Select “SYSTEM” using the SHUTTER/
SYSTEM button, and display the menu on 
the second layer using the 
4button.
2When the indication “CARD-WR” is 
displayed on the LCD panel together with the 
file number displayed under the indication, 
turn the Rotary Encoder 1 to select the file.

If the file already exists, the title is displayed 
under the TITLE indication. Be careful and 
do not overwrite the...

E-23
Menu operation
Operations using the LCD panel
The menu can be adjusted using the Rotary 
Encoders (1 to 3) after displaying the menu on 
the LCD panel.
1Press one of the following buttons: BLACK/
SHAD button, FLARE/MATRIX button, 
GAMMA/DTL button, WHITE/SKINDTL 
button, or KNEE/FUNC button to select an 
item on the menu.
2The indication will switch to the item under 
the panel # the item on the panel # the 
state before entering the menu mode # the 
item under the panel step by step every time 
the...

E-24
ENGLISH
Menu item
Menu
The menu items on the unit may vary with the 
camera recorder connected to the unit.
For the following menu items, the factory settings 
for the unit only are set separately from the 
camera recorder.
ŠBLACK-VR-CONTROL, BLACK-VR-
MODE, and BLACK-VR-RANGE in 
“BLACK”
ŠGAIN-VR-MODE and GAIN-VR-RANGE in 
“WHITE”
ŠBUZZER, LCD CONTRAST, and SW 
BRIGHT in “SYSTEM”
When the column of “Storage” in the menu table 
is answered with “Yes”, the settings for the 
relevant items can be...

E-25
Menu item (Continued)
FLARE

When the BLACK volume is assigned for flare 
adjustment, it must be set in BLACK-VR-CONTROL, 
BLACK-VR-MODE, and BLACK-VR-RANGE. When 
“FLR” is selected in the BLACK-VR-CONTROL item, the 
flare can be adjusted by using the BLACK volume. 
Switching between the absolute value mode and the 
relative value mode of the volume can be set in the 
BLACK-VR-MODE item, while switching of the variable 
range can be set in the BLACK-VR-RANGE item. When 
the absolute value is...

E-26
ENGLISH
Menu item (Continued)
WHITE (Continued)
LayerItemVariable 
rangeContents descriptionStorage
6COLR-
TEMP-PRE2300k
    :
8000kTo set the color 
temperature in the AWB 
PRENo
7
AW B- AMEMTo set the position of 
the WHITE BAL switch 
and the assignment of 
Ach
MEM: This assigns the 
memory value 
when the AWB is 
executed.Yes
TEMP-A2300k
    :
8000kTo set the position of 
the WHITE BAL switch 
and the color 
temperature in case of 
Ach
The step varies with the 
camera conditions.No
8
AW B- A -...

E-27
Menu item (Continued)
KNEE SHUTTER
LayerItemVariable 
rangeContents descriptionStorage
1M-KNEEON
OFFTo set the mode when 
the AUTO KNEE switch 
is off
ON: MANUAL KNEE 
OFF: KNEE OFFYes
2
MKNPNT70.0%
    :
107.0%To set the position of 
the MANUAL KNEE 
POINT by 0.5% stepYes
MKNSLP00
  :
99To set the tilt angle of 
the MANUAL KNEEYes
3
WCLIPON
OFFTo set ON/OFF of the 
WHITE CLIP function
Yes
WCLIPLVL90%
    :
109%To set the WHITE CLIP 
LEVEL
4
AKNP80%
    :
107%To set the position of 
the AUTO KNEE...

E-28
ENGLISH
Menu item (Continued)
SHAD

For the adjustment of the shading, the adjusted setting 
on the unit will be retained in the main unit of the camera 
recorder regardless of the ON/OFF setting on the RC-
DATA-SAVE item.
MATRIX
LayerItemVariable 
rangeContents descriptionStorage
1B-SHDON
OFFTo select the black 
shading ON/OFFYes
DETECTEXECTo activate the auto 
black shading 
adjustmentNo
2
W- SHDON
OFFTo select the white 
shading ON/OFFYes
3
HSAW
(W-R)–255
    :
+255To adjust the R-H-SAW 
white...

E-29
Menu item (Continued)
DTL SKIN DTL
LayerItemVariable 
rangeContents descriptionStorage
1MDTL–31
    :
+31To set the level of the 
master detail (H and V)
Yes
HDTL0
 :
63To set the H.DTL 
LEVEL
VDTL0
 :
31To set the V.DTL LEVEL
2
CORGOFF
0
 :
5To set detailed noise 
elimination level
Yes
FREQ0
 :
31To set the H.DTL FREQ
LDP0
:
5To set the LEVEL 
DEPEND
3
K-APOFF
0
 :
5To set the details of the 
high brightness part
Yes
+GAIN–31
   :
+31To change the level in 
the + direction of the 
H.DTL
–GAIN–31...