Panasonic Aj Pcd20 Operating Instructions Manual

Memory Card Drive/Lecteur de carte mémoire
驱动器/ÝÞ攧”ÅÅå Ò
Operating Instructions/Mode d’emploi
操作手册/	{
†Ì	{
Before operating this product, please read the instructions carefully and save this manual for
future use.
Avant d’utiliser l’appareil, lire attentivement ce mode d’emploi, et le conserver a des fins de ref-
erence ulterieure.
在操作本机之前，请仔细阅读本说明书，并将说明书妥善保管，以备将来使用。
S
M	

E-1
Read this first!
For AJ-PCD20P and AJ-PCD20E
 indicates safety information.
CAUTION:
TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE,
USE THE RECOMMENDED ACCESSORIES ONLY.
CAUTION:
THE AC RECEPTACLE (MAINS SOCKET OUTLET) SHALL BE INSTALLED NEAR THE
EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.
TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT
THE POWER CORD PLUG FROM THE AC RECEPTACLE. 
WARNING:
zTO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS...

E-2
ENGLISH
Read this first! (continue)
For AJ-PCD20P
 indicates safety information.
CAUTION:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful...

E-3
Read this first! (continue)
For AJ-PCD20E
 indicates safety information.
Caution for AC Mains Lead
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This product is equipped with 2 types of AC mains cable.  One is for continental Europe, etc. and
the other one is only for U.K.
Appropriate mains cable must be used in each local area, since the other type of mains cable is
not suitable.
FOR CONTINENTAL EUROPE, ETC.
Not to be used in the U.K.
FOR U.K. ONLY
FOR U.K. ONLY
This appliance is...

E-4
ENGLISH
Table of Contents
Read this first!  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
Overview  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
Supplied Accessories (AJ-PCD20P/AJ-PCD20E) . . . . . . . . . . . . . . . . . .  5
Parts and their Functions . . . . . . . . . . . . . . . . . . ....

E-5
Overview
The AJ-PCD20 (hereinafter referred to as “P2 drive”) is a data transfer device that uses a USB 2.0 or
IEEE1394b interface and is designed only for P2 cards.
The P2 drive is capable of making high-speed transfers of clip data shot with a memory card camera
recorder for P2 cards to a personal computer (Windows/Apple Macintosh).
This device supports not only the transferring and copying of clips recorded on P2 cards, but also direct
editing.
Features
zThe P2 drive features five card slots.
zIt...

E-6
ENGLISH
Parts and their Functions
Front Panel
(1) Power Indicator
This indicator lights up in green when the P2
drive is running.
(2)Status Indicator
This indicator lights up in green during access
to a P2 card.

Do not remove the P2 card during access of
the card, otherwise files may be corrupted, or
the P2 card may fail.
(3)Card Slots
The P2 drive’s card slots are designed for P2
cards.
The P2 drive does not operate with cards
other than P2 cards.
(4)EJECT Button
To remove a P2 card, press this...

E-7
Inserting a P2 Card
When inserting a P2 card into the slot in the P2
drive, make sure you keep the card horizontal as
you ease it in.
Forcing the card in on an angle may cause a
problem.
Write-protection of P2 Card
A P2 card has a write-protect switch. Setting this
switch to “PROTECT” can prevent writing and
deleting of data.
Note: The write-protect switch is not effective
when the P2 card is inserted in the P2 drive.
Make sure you remove the P2 card from the P2
drive, set the switch, then re-insert...

E-8
ENGLISH
Installation (continue)
To Connect the P2 drive to a Personal Computer for External Use
1Attach the rubber feet to the dimples on the
base of the P2 drive.
2Start the personal computer.
3Plug the AC adapter supplied with the P2
drive into the DC IN 16V socket on the P2
drive.
The P2 drive will start.
4(To be connected by USB 2.0)
Plug a USB 2.0 cable B connector into the
USB connector on the P2 drive. then plug the
other end (A connector) of the USB 2.0 cable
into the USB 2.0 port on the...

E-9
Installation (continue)
5(To be connected by IEEE1394b)
Connect the P2 drive to the personal
computer with a IEEE1394b cable.

zNo IEEE1394b cable is supplied with the
P2 drive in the package. Use a
commercially available IEEE1394b cable.
zBefore proceeding to
connect the unit which uses
a 6-pin type IEEE 1394
connector, carefully check
the shape of the
IEEE1394b cable and the
connectors on IEEE1394b
cable. Connecting a connector upside
down may damage the parts inside the
unit and cause...