Panasonic Aj D900wa Operating Instructions Manual

– 101 –
Replacing the Backup Battery
The unit is shipped from the factory with a backup battery already mounted. When the battery
runs out, the TCG time code value indicates 00:00:00:00.
At this time, the time code value cannot be backed up.
In addition, the “BACK UP BATT EMPTY” display appears in the viewfinder for 3 seconds when
the POWER switch is set to ON to indicate that the battery must be replaced.
Consult your dealer when replacing the battery.
Backup battery 

– 102 –
MARKER Screen
This page sets the setting for the marker displays inside the viewfinder.
The underlined setting in the Variable range column indicates the preset mode.
-ROP-
¢
R : +000
+000
+006
00
0.45
+000
+000
+000 B:
MAS :
:
:
R:GG
AA
GAINGAIN
:
B
MM
TER PEDMASTER DT LMASTER
: PED LSTA
PED LSTA
PED LSTA
ItemVariable VF
Remarksrange display
CENTER MARK
ON USER Center mark display ON/OFF
OFF ENG
SAFETY ZONE OFF USER Safety zone switching/display OFF
1 – 6 ENG
Setting Menu Screens
ROP Screen
This...

– 103 –
VF DISPLAY Screen
This page sets the setting for the display information inside the viewfinder.
Menu screen display methods
USER menu:Setting the MENU
switch to SET displays the USER
menu.
ENG menu:Holding down the
SHIFT/ITEM and UP buttons
simultaneously and setting the
MENU switch to SET displays the
ENG menu.
The underlined setting in the Variable range column indicates the preset mode.
Menu screen display methods
USER menu:Setting the MENU switch to SET displays the USER menu.
ENG...

– 104 –
Setting Menu Screens
CAMERA ID Screen
This page performs the camera ID settings. Each time the UP button is pressed, the character display changes in the order of
space, English letters (A to Z), numbers (0 to 9) and symbols [space, {, |, ), (, ’, ‘, --, _, x, /, !]. Pressing the DOWN button
changes the character display in the reverse order.
SHUTTER SPEED Screen
This page performs the shutter speed settings. The ON/OFF status for each item is indicated by displaying an asterix (E) or
period (.
)...

– 105 –
SYNCHRO SCAN Screen
This page performs the synchro scan settings.
! LED Screen
This page sets the ON/OFF setting for the ! LED display inside the viewfinder. The ON/OFF status for each item is indicated
by displaying an asterix (E) or period (.
) in front of the item on the screen.
|Note{
The ! LED lights when both GAIN (0 dB) and GAIN (p3 dB) are ON unless the gain is set to
p3 dB or 0 dB.
The underlined setting in the Variable range column indicates the preset mode.
Menu screen display methods...

– 106 –
Setting Menu Screens
SET UP CARD 1/2, 2/2 Screen
These pages set the loading, saving and configuration operations for the setup cards. Align “¢” with the desired item and
press the UP or DOWN button to perform the corresponding processing.
FFor example, so as not to change the CAMERA ID when reading from, or writing to the SET UP CARD, the ID READ/WRITE
should be selected to OFF.
The underlined setting in the Variable range column indicates the preset mode.
Menu screen display methods
USER...

– 107 –
MAIN FUNCTION Screen
This page performs the adjustment function settings.
FThis is displayed when the Picture Link adaptor board (AJ-YAP900, optional accessory) has been installed.
BAT T/ TAPE ALARM Screen
The battery end and tape end audio warnings during shooting can be switched off if they become undesirable.
The underlined setting in the Variable range column indicates the preset mode.
Item
REC. SIGNAL
REC.MODE
PB MODE
RET SW
Variable
range
CAM
VIDEO
16E9/50M
4E3/50M
16E3/25M
4E3/25M
AUTO...

– 108 –
Setting Menu Screens
FUNCTION 1/5 Screen
This page performs the adjustment function 1 settings. The ON/OFF status for each item is indicated by displaying an asterix
(E) or period (.
) in front of the item on the screen.
FUNCTION 2/5 Screen
This page performs the adjustment function 2 settings.
E:ON
.
 : OFF
-F UNC T ION1/5-
¢
EDETA IL.
2D LPF
LEGAMMA
.
TEST SAWEFLARR
E
EH- F CO
COO
MPE . ESUPER
-F UNC T ION2/5-
SUPER V :
UD EC
¢
FILTER INH :OFF
OFF SHOCK
AAL ESS AWB:NORMAL FR
M1
T SAVE :
LR COO...

– 109 –
FUNCTION 3/5 Screen
This page performs the adjustment function 3 settings.
Item
HUMID OPE
26P CONTROL
REC START
TC MODE
UB MODE
PAUSE TIMER
BATTERY SEL
TCG VF DISP
TCG SET HOLD
Variablerange
ON
OFF
OFF
BOTH
ON
ALL
NORMAL
DF
NDF
USER
REAL
EXT
GSPF
10
20
30
NiCd-12
NiCd-13
NiCd-14
DIGITAL
ONOFF
ON
OFF
VFdisplay
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
Remarks
VTR operation selection when
condensation occurs.
ON:Operation continues normally.
OFF:All operations prohibited except
for POWER switch and EJECT...

– 110 –
Setting Menu Screens
FUNCTION 4/5 Screen
This page performs the adjustment function 4 settings.
Item
FRONT POWER
FRONT MIC
REAR MIC CH1
REAR MIC CH2
LINE CH1/CH2
REAR AUDIO
MIC LOWCUT
CH1
MIC LOWCUT
CH2
EMPHASIS
LIMITER
TEST TONE
Variable
range
ON
OFF
p40/
p50/
p60 dB
p40/
p50/
p60 dB
p40/
p50/
p60 dB
o4/0/
p6 dB
STEREO
MONO
ON
OFF
ON
OFF
ON
OFF
ON
OFF
NORMAL
ALL
VF
display
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
Remarks
ON:The phantom power is supplied
to the front microphone.
OFF:The...