Panasonic 5.8 Ghz Digital Gigarange Owners Manual

Programming
21
Programmable settings
You can customise the unit by programming the following features using the handset.
To access the features, there are 2 methods:
– scrolling through the display menus (page 21)
– using the direct commands (page 23)
LMainly the direct command method is used in these operating instructions.
Programming by scrolling through the display menus
1
{MENU}
2Press {V} or {^} to select the desired main menu. i {Select}
3Press {V} or {^} to select the desired item in sub-menu 1....

Programming
22
*1 If you program these settings using one of the handsets, you do not need to 
program the same item using another handset. (KX-TG4382/KX-TG4392/
KX-TG4393/KX-TG4394)
*2 This feature allows the unit to automatically adjust the date and time setting when 
caller information is received. To use this feature, set the date and time first. Initial setting Set answering
(KX-TG4391/
 KX-TG4392/
 KX-TG4393/
 KX-TG4394)Ring count
*134
Recording time*135
Remote code*133
Voice Mail Store VM...

Programming
23
Programming using the direct commands
1
{MENU} i {#}
2Enter the desired feature code.
3Enter the desired setting code. i {Save}
LThis step may vary depending on the feature being programmed.
LTo exit the operation, press {OFF}.
Note:
LIn the following table, < > indicates the default settings.
FeatureFeature 
codeSetting codeSystem 
setting*1Page
Auto talk
*2{2}{0}{0}{1}: On {0}: –16
Customer 
support{6}{8}{0}––26
Date and time{1}{0}{1}–r15
Deregistration{1}{3}{1}––46
HS 
registration...

Programming
24
For the answering system (KX-TG4391/KX-TG4392/KX-TG4393/KX-TG4394)
*1 If “System setting” column is checked, you do not need to program the same item 
using another handset. (KX-TG4382/KX-TG4392/KX-TG4393/KX-TG4394)
*2 If you subscribe to Caller ID service and want to view the caller’s information after 
lifting up the handset to answer a call, turn off this feature.
*3 Turn this feature off if you prefer not to hear key tones while you are dialling or 
pressing any keys, including...

Programming
25
Special instructions 
for programmable 
settings
Night mode
Night mode allows you to select a span 
of time during which the handset will not 
ring for outside calls. This feature is 
useful for instances when you do not 
want to be disturbed, for example, while 
sleeping. Night mode can be set for each 
handset.
Important:
LSet the date and time beforehand 
(page 15).
LWe recommend turning the base unit 
ringer off (page 17) and call screening 
off (page 30) in addition to turning the...

Programming
26
Note:
LTo stop the alarm, press any dial key 
or place the handset on the base unit 
or charger.
LWhen the handset is in use, the alarm 
will not sound until the handset is in 
standby mode.
LIf you select “Once”, the setting 
changes to “Off” after the alarm 
sounds.
LWhen the ringer volume for outside 
calls is set to off (page 23), the alarm 
sound is heard at a low level.
Customer support
The handset can display the Internet 
address where you can download the 
operating instructions...

Caller ID Service
27
Using Caller ID service
Important:
LThis unit is Caller ID compatible. To 
use Caller ID features (such as 
displaying caller phone numbers), you 
must subscribe to Caller ID service. 
Contact your service 
provider/telephone company for 
details.
Caller ID features
When an outside call is being received, 
the phone number is displayed.
Caller information for the last 50 callers 
is logged in the caller list from the most 
recent call to the oldest.
LIf the unit cannot receive caller...

Caller ID Service
28
phonebook, the assigned ringer rings 
after the caller information is displayed.
If you select “No Ringer ID” (default), 
the handset uses the ringer tone you 
selected on page 23 when a call is 
received from that caller.
LThe ringer may be changed after the 
2nd ring.
1Find the desired item (page 19). i 
{Option}
2{V}/{^}: “Ringer ID” i {Select}
3{V}/{^}: Select the desired setting.
4{Save} i {OFF}
Note:
LWhen you assign the ringer ID to an 
entry in the phonebook using one...

Caller ID Service
29
Editing a caller’s phone 
number before calling back
You can edit a phone number in the 
caller list.
1{View CID}
2{V}/{^}: Select the desired entry. 
i {Select} i {Edit}
3Add or erase digits to the beginning 
of the number as necessary.
LTo add a digit, press the desired 
dial key.
LTo erase a digit, press {Clear} or 
{#}.
4{C}
Note:
LThe edited phone number is not saved 
in the caller list.
Erasing selected caller 
information
1
{View CID}
2{V}/{^}: Select the desired entry....

Answering System
30
Answering system
The answering system can answer and 
record calls for you when you are 
unavailable to answer the phone.
You can also set the unit to play a 
greeting message but not to record 
caller messages. Select “Greeting 
only” as the recording time setting 
(page 35).
Important:
LOnly 1 person can access the 
answering system (listen to 
messages, record a greeting 
message, etc.) at a time.
(KX-TG4392/KX-TG4393/
KX-TG4394)
LWhen callers leave messages, the 
unit records the...