Panasonic 5.8 Ghz Digital Gigarange Owners Manual
Here you can view all the pages of manual Panasonic 5.8 Ghz Digital Gigarange Owners Manual. The Panasonic manuals for Cordless Telephone are available online for free. You can easily download all the documents as PDF.
Page 41
Useful Information 41 Error messages If the unit detects a problem, one of the following messages is shown on the display. *1 KX-TG4382/KX-TG4392/KX-TG4393/KX-TG4394 *2 KX-TG4391/KX-TG4392/KX-TG4393/KX-TG4394 Display messageCause/solution Busy or System is busy. Please try again later.LThe called handset*1 or base unit*2 is in use. LOther units are in use and the system is busy. Try again later. *1 LThe handset you are using is too far from the base unit. Move closer and try again. LThe handset’s...
Page 42
Useful Information 42 Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the base unit’s AC adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset, and then insert the batteries into the handset again. General use *1 KX-TG4391/KX-TG4392/KX-TG4393/KX-TG4394 Programmable settings ProblemCause/solution The unit does not work.LMake sure the batteries are installed correctly (page 13). LFully charge the batteries...
Page 43
Useful Information 43 Battery recharge Making/answering calls, intercom *1 KX-TG4391/KX-TG4392/KX-TG4393/KX-TG4394 ProblemCause/solution The handset beeps and/or 7 flashes.LBattery charge is low. Fully charge the batteries (page 14). I fully charged the batteries, but 7 still flashes or 8 is displayed.LClean the charge contacts and charge again (page 14). LIt is time to replace the batteries (page 13). I fully charged the batteries, but the operating time seems to be shorter.LClean the battery...
Page 44
Useful Information 44 Caller ID Answering system (KX-TG4391/KX-TG4392/KX-TG4393/KX-TG4394) ProblemCause/solution Caller information is not displayed.LYou need to subscribe to Caller ID service. Contact your service provider/telephone company for details. LIf your unit is connected to any additional telephone equipment such as a Caller ID box or cordless telephone line socket, plug the unit directly into the wall socket. LIf you use a DSL/ADSL service, we recommend connecting a filter (contact your...
Page 45
Useful Information 45 I cannot operate the answering system.LSomeone is using the unit. Wait for the other user to finish. LA caller is leaving a message. Wait for the caller to finish. LThe handset is too far from the base unit. Move closer. I cannot operate the answering system remotely.LYou are entering the wrong remote access code. If you forgot the remote access code, store a new remote access code (page 33). LPress each key firmly. LThe answering system is turned off. Turn it on (page 34)....
Page 46
Useful Information
46
Registration
ProblemCause/solution
The handset registration may
have been cancelled or the
communication between the
base unit and the handset is
unstable.LRe-register the handset.
1Handset: {MENU} i {#}{1}{3}{0}
2Base unit:
KX-TG4381/KX-TG4382
Press and hold {LOCATOR} for 4
seconds. (No registration tone)
KX-TG4391/KX-TG4392/KX-TG4393/
KX-TG4394
Press and hold {LOCATOR} for 4
seconds until the registration tone
sounds.
– If all registered handsets start ringing,
press the...
Page 47
Useful Information 47 Liquid damage Caution: LTo avoid permanent damage, do not use a microwave oven to speed up the drying process. ProblemCause/solution Liquid or other form of moisture has entered the handset/base unit.LDisconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge...
Page 48
Useful Information 48 Instructions to customer Installation Attached to this apparatus is an approval label. This label is evidence that it is a “Permitted Attachment” which has been authorised to be connected to your telephone service. Conditions relating to connection and operation of this Permitted Attachment are contained in Telecommunications General By-Law 220 (5). You are authorised to install this Permitted Attachment yourself by plugging it into the line socket of any regular telephone. You...
Page 49
Useful Information 49 If you are satisfied with the operation of your telephone service after plugging in your Permitted Attachment, your installation is completed. You will be unable to connect this Permitted Attachment if your telephone service consists only of a wall phone or an old style telephone which is not connected by means of a modern plug and socket. In such cases a new socket will need to be installed. Should the Permitted Attachment not operate when plugged into a socket, it is either...
Page 50
Useful Information 50 Specifications General Base unit Handset Charger (KX-TG4382/KX-TG4392/KX-TG4393/KX-TG4394) Note: LDesign and specifications are subject to change without notice. LThe illustrations in these instructions may vary slightly from the actual product. Operating environment5 °C – 40 °C Frequency5.76 GHz – 5.84 GHz DimensionsApprox. height 63 mm × width 140 mm × depth 119 mm Mass (Weight)KX-TG4381/KX-TG4382 Approx. 170 g KX-TG4391/KX-TG4392/KX-TG4393/KX-TG4394 Approx. 220 g Power...