Palm Zire Handheld Instructions Manual

Network preferences and TCP/IP software
161
3.Tap the command you want from the Command list. If the command requires 
additional information, a field appears to the right of it for you to enter the 
information. The following commands are available:
4.Repeat steps 2 and 3 until the login script is complete.
5.Ta p  O K .
Deleting a service template
There is only one way to delete a service template: use the Delete command from 
the Service menu.
To delete a service template:
1.Tap the Service pick...

Chapter 15 Setting Preferences for Your Handheld
162
Network preferences menu commands
The Network Preferences screen includes menu commands to make it fast and 
easy to create and edit service templates. TCP/IP application menus are shown 
here for your reference. See“Using menus” in Chapter 4 for more information 
about choosing menu commands.
Service menu
Options menu
TCP/IP troubleshooting
If you are having a problem establishing a network connection using TCP/IP, try 
the suggestions listed....

Owner preferences
163
Adding a DNS number
If your ISP or dial-in server requires a DNS number and you did not enter that 
information in the Network Preferences screen, it will appear that you successfully 
logged into your network. When you try to use an application or look up 
information, however, the connection fails. If this occurs, try adding a DNS 
number. Ask your ISP or your System Administrator for the correct Primary and 
Secondary DNS IP numbers.
Owner preferences
The Owner Preferences screen...

Chapter 15 Setting Preferences for Your Handheld
164
ShortCuts preferences
The ShortCuts Preferences screen enables you to define abbreviations for entering 
text with Graffiti strokes. This section describes how to create, edit, and delete a 
ShortCut. See“Graffiti ShortCuts” in Chapter 3 for more information on the use of 
ShortCuts. 
Creating a ShortCut
You can create a ShortCut for any words, letters, or numbers. All ShortCuts you 
create appear on the list in the ShortCut Preferences screen. All the...

ShortCuts preferences
165
Editing a ShortCut
After you create a ShortCut, you can modify it at any time.
To edit a ShortCut:
1.Tap the ShortCut you want to edit.
2.Tap Edit.
3.Make the changes you want and tap OK.
Deleting a ShortCut
If you no longer need a ShortCut, you can delete it from the list of ShortCuts.
To delete a ShortCut:
1.Tap the ShortCut you want to delete.
2.Tap Delete.
3.Tap Yes. 

Chapter 15 Setting Preferences for Your Handheld
166 

167
APPENDIX A
Maintaining Your Handheld
This chapter provides information on the following:
nProper care of your handheld
nProlonging battery life
nResetting your handheld
Caring for your handheld
Your handheld is designed to be rugged and reliable and to provide years of 
trouble-free service. Please observe the following general tips when using your 
handheld:
nTake care not to scratch the screen of your handheld. Keep the screen clean. 
When working with your handheld, use the supplied stylus or...

Appendix A Maintaining Your Handheld
168
Battery considerations
Your handheld comes with a Lithium-ion battery which is recharged each time 
you connect the handheld to the power adapter. On some computers, your 
handheld may recharge at a slower rate when it is connected to your computer 
with its USB cable.
Please note the following considerations about the batteries in your handheld:
nUnder normal conditions, your handheld battery should remain charged by 
connecting it to the power adapter for just a...

Resetting your handheld
169
To perform a soft reset:
nUse the tip of an unfolded paper clip (or similar object without a sharp tip), to 
gently press the reset button inside the hole on the back panel of your handheld.
Performing a hard reset
With a hard reset, all records and entries stored in your handheld are erased. 
Never perform a hard reset unless a soft reset does not solve your problem. 
NOTEYou can restore any data previously synchronized with your computer during 
the next HotSync operation....

Appendix A Maintaining Your Handheld
170
To restore your data from a Windows computer after a hard reset:
1.Click the HotSync icon ™
 in the Windows system tray (bottom-right corner 
of the taskbar).
TIPYou can also click the HotSync command on the Palm Desktop software 
menu bar.
2.From the HotSync Manager menu, select Custom.
3.Select the appropriate username from the list.
4.Select an application in the Conduit list.
5.Click Change.
6.Select Desktop overwrites handheld.
NOTEChanging the HotSync...