Palm Tungsten T2 Instructions Manual

Adding a location
347
To select the secondary locations:
1.Tap the pick list next to the secondary location.
2.Tap the location you want to use as the new secondary location. 
If an appropriate location does not appear in the list, see the next section, “Adding 
a location”.
Adding a location
If an appropriate location does not appear in the Location pick list, you can add a 
new location to the list. When you add a location, the default Time Zone and 
Daylight Saving settings are usually correct....

Chapter 20 Using World Clock
348
8.Ta p  O K .
9.Ta p  D o n e .
To set Daylight Saving options:
1.From the Edit Location dialog box, tap the This location observes Daylight 
Saving Time check box to select it.
2.Tap the Start box.
3.Tap the month when daylight saving begins.
4.Tap the Week pick list.
5.Select the week when daylight saving begins within the selected month.
6.Tap the Day pick list.
7.Select the day of the week when daylight saving begins within the selected 
week.
8.Ta p  O K .
9.Tap the...

Removing a location
349
5.Adjust the settings. See “Adding a location” earlier in this chapter for details.
6.Ta p  O K .
7.Ta p  D o n e .
Removing a location
If you no longer need a location that appears in the Location list, you can remove 
it. However, you cannot remove a location that is currently assigned to the primary 
location.
To remove a location:
1.Tap a Location pick list.
2.Select Edit List.
3.Select the location you want to remove.
4.Ta p  R e m o v e .
5.Tap OK to confirm the deletion....

Chapter 20 Using World Clock
350
4.When the alarm reminder message appears, do one of the following:
Tap OK to permanently dismiss the reminder and return to the current screen.
Tap Snooze to dismiss the reminder and return to the current screen. An 
attention indicator blinks in the upper-left corner of the screen to remind you of 
the pending alarm, and the reminder message appears again in five minutes. 
When the reminder message reappears, the current time appears in the 
Reminder bar and the alarm...

351
CHAPTER 21
Performing HotSync
®
 Operations
HotSync® technology enables you to synchronize data between one or more 
Palm OS
® handhelds and Palm™ Desktop software or another personal 
information manager (PIM) such as Microsoft Outlook. To synchronize data, you 
must connect your handheld and your computer either directly or indirectly. 
Direct methods include placing your handheld in the cradle/cable attached to 
your computer, using infrared communications, or using a Bluetooth™ 
connection....

Chapter 21 Performing HotSync® Operations
352
3.Click the General tab, and select one of the following options:
If you’re not sure which option to use, keep the default setting: Always 
available.
4.If you are using a serial cradle/cable, click the Local tab to display the settings 
for the connection between your computer and the handheld cradle/cable, and 
adjust the following options as needed. 
If you are using the USB cradle/cable, you do not need to use the settings on the 
Local tab for a direct...

Selecting HotSync setup options
353
5.Click the Modem tab to display the modem settings and adjust the options as 
needed. For more information, see “Conducting modem HotSync operations” 
later in this chapter.
6.If you are attached to a network, click the Network tab to display the network 
settings and adjust the options as needed. For more information, see 
“Conducting network HotSync operations” later in this chapter.
7.Click OK.
To set the HotSync options on a Mac computer:
1.Double-click the...

Chapter 21 Performing HotSync® Operations
354
3.If you are using the USB cradle/cable, you do not need to adjust the settings on 
the Connection Settings tab for a direct HotSync operation; they are set 
automatically when you perform the first HotSync operation. 
If you are using Mac OS 9.1 and the optional serial cradle/cable, click the 
Connection Settings tab and select the port where you attached the 
cradle/cable.
.
You can set both Modem and Printer port settings and prepare your computer 
to...

Customizing HotSync application settings
355
To customize HotSync application settings on a Windows computer:
1.Click the HotSync icon   in the Windows system tray (bottom-right corner of 
the taskbar).
You can also click the HotSync command on the Palm Desktop software 
menu bar.
2.From the HotSync Manager menu, select Custom.
3.Select the appropriate user name from the list.
4.Select an application in the Conduit list.
5.Click Change.
6.For each application, click the direction in which you want to...

Chapter 21 Performing HotSync® Operations
356
To customize HotSync application settings on a Mac computer:
1.Double-click the Palm Desktop icon in the Palm folder.
2.From the HotSync menu, select Conduit Settings.
3.From the User pop-up menu, select the appropriate user name.
4.Select an application in the Conduit list.
5.Click Conduit Settings.
6.For each application, click the direction in which you want to write data, or click 
Do Nothing to skip data transfer for an application.
Changing the HotSync...