Palm Tungsten T2 Instructions Manual

Setting Communication Preferences
397
6.Ta p  O K .
7.Tap Done to return to the Bluetooth Preferences screen.
8.Tap Done again.
Enabling/disabling the user cache
When you enable or disable the user cache you control whether or not your 
handheld retrieves the names of remote devices each time the discovery process 
takes place. By default, the user cache is enabled. This means that the names of 
devices found during one round of discovery are stored in your handheld’s user 
cache. The next time your...

Chapter 22 Setting Preferences for Your Handheld
398
NOTEPalm works with developers of third-party add-on applications to ensure the 
compatibility of these applications with your new Palm handheld. Some third-party 
applications, however, may not have been upgraded to be compatible with your new 
Palm handheld. If you suspect that a third-party application is adversely affecting the 
operation of your handheld, contact the developer of the application.
Connection Preferences
The Connection Preferences...

Setting Communication Preferences
399
Editing connections
The following example shows you how to edit the IR to GSM Phone connection to 
adjust the communication speed; you can similarly edit other connections or 
settings or create a custom connection. You can use the IR to GSM Phone 
connection to perform a remote IR HotSync operation. To accomplish the HotSync 
operation, your handheld sends data through its IR port to a modem within your 
mobile phone, which then dials a modem attached to or within...

Chapter 22 Setting Preferences for Your Handheld
400
4.Tap Details.
5.Tap the Speed pick list and select the appropriate speed.
6.Enter the initialization string supplied by the documentation for the modem in 
your mobile phone, if necessary.
7.Ta p  O K .
8.Tap OK again to save the configuration.
After you create the configuration, you need to set up the HotSync Manager of 
your Desktop application and the HotSync application of your handheld to 
perform a modem HotSync operation. 
Creating Bluetooth...

Setting Communication Preferences
401
TIPYou can also create a connection with a GSM phone using the Phone Link 
application. We recommend using Phone Link to create phone connections. See 
Chapter 14 for details. Use the steps described in these sections only if you are 
unable to create a connection with Phone Link.
To create a Bluetooth to LAN connection:
1.From the Communications Preferences list, select Connection.
2.Ta p  N e w.
3.Enter a name for the connection, such as BT to LAN.
4.Tap the...

Chapter 22 Setting Preferences for Your Handheld
402
8.When the Discovery Results screen appears, select the device to which you 
want to connect.
If the device to which you want to connect does not appear on the discovery 
results list, tap Find More.
9.Ta p  O K .
If prompted, create a trusted pair with the device. See “Adding trusted devices” 
earlier in this chapter for details.
Connecting to non-GSM phones
If you have a non-GSM phone enabled with Bluetooth technology, you can connect 
with the phone...

Setting Communication Preferences
403
5.Tap the Via pick list and select Bluetooth.
6.Prepare your phone to accept a Bluetooth connection.
NOTESee the documentation that was included with your phone for how to 
prepare your phone to accept a Bluetooth connection. The documentation 
might refer to a Bluetooth connection as a Bluetooth pairing or a Bluetooth link.
7.Ta p  t h e  D e v i c e  b o x .
The discovery process begins, and the discovery screen appears.
8.When the Discovery Results screen appears,...

Chapter 22 Setting Preferences for Your Handheld
404
You can also use your handheld’s Bluetooth technology and the software that is 
included in the handheld operating system to connect with a LAN access point.
To use the e-mail or web browser software included with your handheld, you must 
create a configuration in Connection Preferences and then create Network 
Preferences settings. See “Connection Preferences” earlier in this chapter for a 
complete explanation of how to define Connection...

Setting Communication Preferences
405
To select a network service profile:
1.From the Communications Preferences list, select Network.
2.Tap the Service pick list.
3.Select the network service profile you want to use.
4.Ta p  D o n e .
To duplicate an existing network service profile:
1.From the Communications Preferences list, select Network.
2.Tap the Service pick list.
3.Select the predefined network service profile you want to duplicate.
4.Tap the Menu icon  . 
5.Select Service, and then select...

Chapter 22 Setting Preferences for Your Handheld
406
3.Enter your user name.
NOTEMost dial-in servers do not accept spaces in the user name.
4.Ta p  D o n e .
Entering a password
The Password box identifies the password you use to log into your server or ISP. 
Your entry in this field determines whether your handheld prompts you to enter a 
password each time you log into your network.
■If you do not enter a password, your handheld displays the word “Prompt” in 
this field and asks you to enter a...