Palm Tungsten T Instruction Manual

Setting the primary location
151
2.Tap the location you want to use as the primary location. 
The location you select is typically a large city in the same time zone as the one 
where you live. If an appropriate choice does not appear in the list, see “Adding 
a location” later in this chapter to create a new location.
3.Ta p  O K .
To set the date:
1.Tap Set Date & Time.
2.Tap the Set Date box.
3.Tap the arrows to select the current year.
4.Tap the current month.
5.Tap the current date.
6.Ta p  D o n e...

Chapter 15 Using World Clock
152
3.Tap the up or down arrows to change the hour.
4.Tap each number of the minute, and then tap the arrows to change the minutes.
5.Ta p  O K .
6.Ta p  D o n e .
Choosing a different primary location
If you travel to another location and you want alerts to appear based on local time, 
you need to change the primary location to update the system time. You may 
prefer, however, to use the secondary locations to view the local date and time, and 
to leave the primary location...

Adding a location
153
To select the secondary locations:
1.Tap the pick list next to the secondary location.
2.Tap the location you want to use as the new secondary location. 
If an appropriate location does not appear in the list, see “Adding a location” later 
in this chapter to create a new location.
Adding a location
If an appropriate location does not appear in the Location pick list, you can add a 
new location to the list. When you add a location, the default Time Zone and 
Daylight Saving...

Chapter 15 Using World Clock
154
8.Ta p  O K .
9.Ta p  D o n e .
To set Daylight Saving options:
1.From the Edit Location dialog box, tap the This location observes Daylight 
Saving Time check box to select it.
2.Tap the Start box.
3.Tap the month when daylight saving begins.
4.Tap the Week pick list.
5.Select the week when daylight saving begins within the selected month.
6.Tap the Day pick list.
7.Select the day of the week when daylight saving begins within the selected 
week.
8.Ta p  O K .
9.Tap the...

Removing a location
155
6.Ta p  O K .
7.Ta p  D o n e .
Removing a location
If you no longer need a location that appears on the Location list, you can remove 
it. However, you cannot remove a location that is currently assigned to the primary 
location.
To remove a location:
1.Tap a Location pick list.
2.Select Edit List.
3.Select the location you want to remove.
4.Ta p  R e m o v e .
5.Tap OK to confirm the deletion.
6.Ta p  D o n e .
Setting an alarm
In addition to setting and displaying the date and...

Chapter 15 Using World Clock
156
the pending alarm, and the reminder message appears again in five minutes. 
When the reminder message reappears, the current time appears in the 
Reminder bar and the alarm time appears on the screen.
5.Tap Go To to open World Clock.
Using World Clock menus
World Clock menus are shown here for your reference, and World Clock features 
that are not explained elsewhere in this book are described here.
See“Using menus” in Chapter 4 for information about choosing menu...

157
CHAPTER 16
Performing HotSync
®
 Operations
HotSync® technology enables you to synchronize data between one or more 
Palm OS
® handhelds and Palm™ Desktop software or another personal 
information manager (PIM) such as Microsoft Outlook. To synchronize data, you 
must connect your handheld and your computer either directly or indirectly. 
Direct methods include placing your handheld in the cradle/cable attached to 
your computer, using infrared communications, or using a Bluetooth connection....

Chapter 16 Performing HotSync® Operations
158
If you’re not sure which option to use, keep the default setting: Always 
available.
4.If you are using a serial cradle/cable, click the Local tab to display the settings 
for the connection between your computer and the handheld cradle/cable, and 
adjust the following options as needed. 
If you are using the USB cradle/cable, you do not need to use the settings on the 
Local tab for a direct HotSync operation. 
5.Click the Modem tab to display the modem...

Selecting HotSync setup options
159
To set the HotSync options on a Mac computer:
1.Double-click the HotSync Manager icon in the Palm folder.
2.Click the HotSync Controls tab, and select any of the following options.
3.If you are using the USB cradle/cable, you do not need to adjust the settings on 
the Connection Settings tab for a direct HotSync operation; they are set 
automatically when you perform the first HotSync operation. 
HotSync Enabled/
DisabledActivates the transport monitor and prepares...

Chapter 16 Performing HotSync® Operations
160
If you are using the optional serial cradle/cable, click the Connection Settings 
tab and select the port where you attached the cradle/cable.
.
You can set both Modem and Printer port settings and prepare your computer 
to synchronize with your handheld using the HotSync cradle/cable or a 
modem. However, choosing both setups prevents you from using either port for 
other operations such as printing, faxing, or AppleTalk networking. 
4.Close the HotSync...