Optoma X306st Projector User Manual
Here you can view all the pages of manual Optoma X306st Projector User Manual. The Optoma manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 61
61English Appendices Lamp Replacement Procedure: 1. Switch off the power to the projector by pressing the “” button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Unscrew the two screws on the cover. 1 5. Lift up and remove the cover. 2 6. Unscrew the two screws on the lamp module. 3 7. Lift up the lamp handle 4 and remove the lamp module slowly and carefully. 5 To replace the lamp module, reverse the previous steps. 8. Turn on the projector and reset the...
Page 62
62English Appendices For widescreen resolution (WXGA), the compatibility sup-port is dependent on Notebook/PC models. Please note that using resolutions other than native 1024 x 768 (XGA model), 1280 x 800 (WXGA model) may result in some loss of image clarity. (*1) 1920 x1200 @60Hz only sup-port RB (reduced blanking). (*2) 3D timing for True 3D projector. (*3) is not sup-ported HDMI input singal for Mac. (*4) is only for Type A model. 120Hz input signals may be dependent on graphics cards...
Page 63
63English Appendices 3D Input Video Compatibility SignalResolutionRefresh Rate (Hz)VideoAnalogHDMIMac SDTV (576i)768 x 57650O-O- SDTV (576p)768 x 57650O-O- SDTV (480i)640 x 48060O-O- SDTV (480p)640 x 48060O-O- Input Resolution HDMI 1.4a 3D Input Input Timing 1280 x 720p @ 50HzTop-and-Bottom 1280 x 720p @ 60HzTop-and-Bottom 1280 x 720p @ 50HzFrame packing 1280 x 720p @ 60HzFrame packing 1920 x 1080i @ 50 HzSide-by-Side (Half) 1920 x 1080i @ 60 HzSide-by-Side (Half) 1920 x 1080p @ 24 HzTop-and-Bottom...
Page 64
64English Appendices RS232 Pin Assignments RS232 Commands and Protocol Function List RS232 shell is grounded. Pin no.Spec. (from projector side) 1N/A 2RXD 3TXD 4N/A 5GND 6N/A 7N/A 8N/A 9N/A 1 2 3 4 5 6 7 8 9
Page 65
65English Appendices RS232 Protocol Function List Baud Rate : 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control : None UART16550 FIFO: Disable Projector Return (Pass): P Projector Return (Fail): F 1. There is a after all ASCII commands. 2. 0D is the HEX code for in ASCII code. XX=00-99, projector's ID, XX=00 is for all projectors Opt oma X3 05S T/W305S T/X306ST /W306ST RS 232 & Telnet Co mman...
Page 66
66English Appendices ----- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ----- -- -- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ----- ------ --- ------ --- ------ --- -- -- --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ----- -- -- ------ --- ------ --- ------ --- ------ --- ------ ---...
Page 67
67English Appendices ----- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ----- -- -- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ - -- --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ----- -- -- ------ --- ------ --- ------ --- ------ --- ------ ---...
Page 68
68English Appendices SEN Dfr o mp ro je cto rautomatic ally -- --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ----- -- -- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ - 232ASC IICod eH EXCo deFu ncti onProjecto rReturnD escr ipt io n-- --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------ --- ------...
Page 69
69English Appendices Please note that damage resulting from incorrect installation will void the warranty. Wall Mount Installation 1. To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specifications: Screw type: M4*3 Maximum screw length: 11mm Minimum screw length: 8mm Warning: 1. If you buy a ceiling mount from another company,...
Page 70
70English Appendices Optoma Global Offices For service or support please contact your local office. USA 3178 Laurelview Ct. 888-289-6786 Fremont, CA 94538, USA 510-897-8601 www.optomausa.com [email protected] Canada 3178 Laurelview Ct. 888-289-6786 Fremont, CA 94538, USA 510-897-8601 www.optomausa.com [email protected] Latin America 3178 Laurelview Ct. 888-289-6786 Fremont, CA 94538, USA 510-897-8601 www.optomausa.com [email protected] Europe 42 Caxton Way, The Watford Business Park...