Optoma X306st Projector User Manual

41English
User Controls
SETUP | Security
 Security
 On: Choose “On” to use security verification when the turning 
on the projector.
 Off: Choose “Off” to be able to switch on the projector without 
password verification.
 Security Timer
Use this function to set the how long (Month/Day/Hour) the 
projector can be used. Once this time has elapsed you will be  
requested to enter your password again.
 Change Password
 First time:
1.  Press “  ” to set the password.
2. The password has to be 4 digits....

42English
User Controls
 If the incorrect password is entered 3 times, the projector will 
automatically shut down.
 If you have forgotten your password, please contact your local 
office for support.
  

43English
User Controls
SETUP |  
Audio Settings
 Internal Speaker (*)
Choose the “On” or “Off” to turn on or off the internal speaker.
 Mute
 Choose the “On” to turn mute on. 
 Choose the “Off” to turn mute off. 
 Audio Input (*)
The default audio settings are on the back panel of the projector . 
Use this option to reassign any of the Audio Inputs (1 or 2) to the 
current image source. Each Audio input can be assigned to more 
than one video source.
  Default.
  Audio 1: VGA 1 and VGA 2.
  Audio...

44English
User Controls
SETUP | Advanced
 Logo
Press  to capture an image of the picture currently displayed on 
screen. If changes are made they will take effect the next time the 
projector is powered on.
 Default: The default startup screen.
 Neutral: Logo is not displayed on startup screen.
 Closed Captioning
Use this function to set the desired startup screen. If changes are 
made they will take effect the next time the projector is powered 
on.
 Off: select “Off” to turn off the closed...

45English
User Controls
SETUP | LAN
 LAN State
Display the network connection status.
 DHCP
Use this function to select your desired startup screen. If you 
change the setting from one to another, when you exit the OSD 
menu, the new setting will take effect on next open.
 On: Assign an IP address to the projector from an external 
DHCP server automatically.
 Off: Assign an IP address manually.
 IP Address
Display an IP address.
 Subnet Mask
Display subnet mask number.
 Gateway
Display the default...

46English
User Controls
1. Turn on DHCP to allow a DHCP 
server to automatically assign an IP, or 
manually enter the required network 
information.
2. Then choose apply and press “
” button to complete the configuration 
process.
3. Open your web browser and type in IP 
Address from the OSD LAN screen then 
the web page will display as below:
How to use web browser to control your projector
	When you use the projector IP ad-dress, you cannot link to your service server.
4. B a s e d   o n   n e t w o r...

47English
User Controls
When making a direct connection from your computer to the projector
Step 1: Find an IP Address (192.168.0.100) from LAN function of projector.
Step 2: Select apply and press “Enter” button to submit function or press “menu” key to 
exit.
Step 3: To open Network Connections, 
click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections. Click the connection you want to configure, and then, under Network Tasks  , click Change settings...

48English
User Controls
Crestron RoomView™ provides a central monitoring station for 250+ 
control systems on a single Ethernet network (more are possible, 
the number depends on the combination of IP ID and IP address). 
Crestron RoomView monitors each projector, including projector’s 
online status, system power, lamp life, network setting and hardware 
faults, plus any custom attribute as defined by the Administrator. 
The Administrator can add, delete, or edit room information, contact 
information...

49English
User Controls
3. Edit Attribute
4. Edit Event 
 
For more information, please visit
http://www.crestron.com & www.crestron.com/getroomview. 

50English
User Controls
 Input Source
Use this option to enable / disable input sources. Press  to enter 
the sub menu and select which sources you require. Press “Enter” 
to finalize the selection. The projector will not search for inputs that 
are not selected.
 Source Lock
 On: The projector will only search current input connection.
 Off: The projector will search for other signals if the current input signal is lost. 
  High Altitude
When “On” is selected, the fans will spin faster. This feature...