Optoma X306st Projector User Manual

21English
User Controls
Control Panel
Control Panel & Remote Control
/
/
Using the Control Panel
POWERRefer to the “Power On/Off the Projector” section on 
pages 16-17.
RE-SYNCAutomatically synchronize the projector to the input 
source.
Enter / Help  / 
Confirm your item selection.
  Help Menu (only available when OSD menu is not 
shown).
SOURCEPress “SOURCE” to select an input signal.
MenuPress “Menu” to launch the on-screen display 
(OSD) menu. To exit OSD, Press “Menu” again.
Four Directional 
Select...

22English
User Controls
Remote Control
Using the Remote Control
Power  
Refer to the “Power On/Off the Projector” 
section on pages 16-17.
L ButtonMouse left click.
R ButtonMouse right click.
Page +Use this button to page up.
Page -Use this button to page down.
EnterConfirm your item selection.
SourcePress “Source” to select an input signal.
Re-Sync Automatically synchronizes the projector to 
the input source.
Four Directional 
Select KeysUse     to select items or make 
adjustments to your selection....

23English
User Controls
Using the Remote Control
FreezePress “Freeze” to pause the screen image. 
Press this button again to unlock.
AV muteMomentarily turns off/on the audio and 
video.
S-Video Press “S-Video” to choose S-Video source.
VGAPress “VGA” to choose VGA sources.
VideoPress “Video” to choose Composite video 
source.
SwitchUSB mouse switch.
Mode
Select the display mode from Presentation,
Bright, Movie, sRGB, Blackboard, Class-
room, User and 3D.
ZoomZoom in on an image.
Press    buttons to...

24English
User Controls
 Using the HELP button
The HELP function ensures easy setup and operation. 
 Press the “?” button on the control panel to open the Help 
Menu. 
/
/   

25English
User Controls
	Please refer to the 
“Troubleshooting” 
section on pages 
55-59 for more 
details.
 Help menu button functions only when no input source 
is detected.
 If input source is detected and help button is pressed, the 
following pages will appear to help diagnose any problems. 

26English
User Controls 

27English
User Controls
The Projector has multilingual On-screen Display menus that 
allow you to make image adjustments and change a variety of 
settings. The projector will automatically detect the source. 
How to operate 
1. To open the OSD menu, press “Menu” on the Remote Control or 
Projector Keypad.
2  When OSD is displayed, use   keys to select any item in the 
main menu. While making a selection on a particular page, press 
 or “Enter” key to enter sub menu.
3. Use   keys to select the desired...

28English
User Controls
Menu Tree
W3055S OSD Menu Tree.xls
Main Menu Sub MenuSettings
ImageDisplay Mode
Brightness -50~50
Contrast -50~50
Sharpness 1~15
Color -50~50
Tint -50~50
Advanced Gamma Film / Video / Graphics / Standard
1~10
Color Temp. Warm / Medium / Cold
Color Settings Hue / Saturation / Gain
White R / G / B
Reset
Exit
Color Space AUTO / RGB / YUV
Signal Automatic On / Off
Phase (VGA) 0~31
Frequency (VGA) -5~5
H. Position (VGA) -5~5
V. Position (VGA) -5~5
Exit
Exit
Reset
DisplayFormat 4:3 /...

29English
User Controls
W3055S OSD Menu Tree.xls
Main Menu Sub MenuSettings
SetupProjector ID 0~99
Audio Settings Internal Speaker On / Off
Mute On / Off
Audio Input Default / Audio1 / Audio2
Volume Audio 0~10
Mic 0~10
Volume 0~10
Advanced Logo Default / Neutral
Closed Captioning Off / CC1 / CC2
Exit
LAN Settings LAN State
DHCP On / Off
IP Address
Gateway
DNS
Apply Yes / No
Exit
OptionsInput Source
Source Lock On / Off
High Altitude On / Off
Information Hide On / Off
Keypad Lock On / Off
Test Pattern...

30English
User Controls
IMAGE
 Display Mode
There are many factory presets optimized for various types of  
images.
 Presentation: Good color and brightness from PC input.
 Bright: Maximum brightness from PC input.
 Movie: For home theater.
 sRGB: Standardised accurate color.
 Blackboard: This mode should be selected to achieve optimum 
color settings when projecting onto a blackboard (green).
 User: User’s settings.
 3D: Recommend setting for 3D mode enabled. Any further ad-
justments by the user...