Optoma Projector Tw865 Nlw User Manual

							
English6

User Controls

2 There are 3 options in this page.
Click “Download”, it displays the interface to download the soft-
ware of “Optoma Presenter”.
Click “Crestron”, to enter the control page of Flash UI.
Click “Admin”, the log-in page shows up.
3.  Enter the password and click [Login] button, and then main page 
is displayed. The default password is “admin” when target system 
is brand new. The maximum password is 8 characters with any 
characters except “space”.
4. Click “Logout”, it returns back to log-in page.
 System Status
This page indicates the information of Model Name, Versions, 
LAN Status and Wireless Status.
 General Setup
Password of entering control web page can be changed here. Old 
password is requested when changing a new password.


 
						

							
English62

User Controls

 Projector Control
All items in this page is the detail options about how to control 
the projector more smoothly. Example: Power On/OFF, Source 
change, Brightness, ….This page will refresh the status currently 
of all the items in few seconds.
 Alert Setup
This page is to set up the alert notification for kinds of error types 
by sending mail. Alert type is multi-options.
 SMTP Mail Setup
This page is to set up the details of mail sending, ex. mail server 
IP address, user name, password and mail address of receivers. 
(Note: Multi-receivers are separated by semicolon.)
 Network Setup
This page is to set up network parameters of IP, DHCP Server, 
and wireless. 
						

							
English63

User Controls

IP Setup: Click “Obtain an IP address automatically” as auto 
mode; click “Use the following IP Address” as static mode, IP 
Address/Subnet Mask/Default Gateway/ DNS Server are re-
quired to be filled and then click “Apply” button.
DHCP Server Setup: Enable/Disable, Start IP, End IP, Subnet 
Mask, Default Gateway, DNS server.
Wireless Setup: Connect with wireless dongle, and then setup 
WLAN mode, SSID, KEY, Channel etc.
 Presenter Setup
Admin password/User password is used to change the password 
for admin/user in target side.
Click “Connection Control” to enter “Connection Status”
Conference Control: Click “On” or “Off” to enable/disable co\
nfer-
ence control mode.



 
						

							
English64

User Controls

Click the following icons under “Play Control”
: Click to disconnect host PC.
: Click to switch session to background.
: Click to change display region.
 Crestron RoomView
This is the control page of Flash UI.
Click “Power” to control power on/off of projector.
Click “Vol-, Mute, Vol+” to control volume.
In the SourceList, it includes all sources that the projector can 
process.
Click “Menu” to open menu; click “Source” to choose next sou\
rce; 
click “Auto” to detect the source automatically; click “Blank”\
 for AV 
mute function.
“Contrast, Brightness, Color, Sharpness, Zoom, Freeze” can be 
adjusted in the control panel below.


 
						

							
English65

User Controls

Click “Tools”, the following items are included:
Crestron Control: the basic network information of the control 
system device.
Projector: the ID of each projector in a building for Administrator 
to control.
User Password: change user’s password.
Default Language: set the default language.
DHCP: enable/disable DHCP and the details of network card.
Admin Password: change administrator’s password.
After change each items, click “Send” button to make it effect.
Click “Info” to show information and status of this projector.





 
						

							
English66

User Controls

Click “Help” to inform administrator to do related protection or 
operation.
 Reset to Default
Click “Apply” to reset system to the default settings.
Click “Flash Upgrade” to upgrade the Firmware from USB disk, 
which has been inserted in projector.
 Reboot System
Click “Reboot” to reboot system. 
						

							
English67

User Controls

How to use the Card Reader
The Card Reader application can display packaged images in a 
USB flash device.
. Plugging the USB device into USB port of projector, source of 
Flash Drive is detected, and then USB Flash Devices Detection 
Screen is displayed. It supports 3 USB devices at the same time.
2. Press “Enter” to enter Thumbnail mode, different photos in dif-
ferent folders can be chosen; press “Menu” to open menu.The 
following buttons are supported in the user interface:
Previous: Move the selected item left. (Go to previous page 
when this is the most left item)
Next: Move the selected item right. (Go to next page when this 
is the most right item.)
Display: Display the selected image or folder.
Thumbnail: Enter the Thumbnail Display Mode.
Slide Show: Enter the Slide Show Mode.
Name Order: Sort files/folders in name order.
Extend Order: Sort files/folders in extended order.
SizeOrder: Sort files/folders in size order.
TimeOrder: Sort files/folders in time order.
Projector Menu: Enter OSD menu.









 
						

							
English68

User Controls

File Name On/OFF: Enable/Disable file name display in Thumb-
nail Display Mode.
Press Up/Down/Left/Right key to choose different functions.
3. In the menu of Thumbnail mode, choose Display function, or 
choose file and press “Enter” to enter Display mode. The following 
buttons are supported in the user interface:
Display: Enter the Image Display Mode.
Thumbnail: Enter the Thumbnail Display Mode.
Slide Show: Enter the Slide Show Mode.
Actual Size: Display in actual size of the image.
Best Fit: Display the image in best fit to the screen.
EXIF Disp OFF/On: Enable/Disable EXIF information display.
+90/-90 deg: Rotate 90/-90 degree.
Press Up/Down/Left/Right key to choose different functions.
4. Press the SlideShow key to enter the Slide Show Mode. The fol-
lowing buttons are supported in the user interface:
Stop: Stop Slide Show Mode.
Delay 3/4/5: Slide Show delay in seconds.









 
						

							
English69

User Controls

Slide Effect: Following modes are supported. (Slide Right/Slide 
Down/Slide Up/Slide Auto)
Repeat ON/OFF: Enable/Disable Slide Show Repeat Mode.
Press Up/Down/Left/Right key to choose different functions.
When the image can NOT be displayed due to memory limitation 
or can NOT support image format, the specific image is displayed 
on the center of the screen.

 
						

							
English70

User Controls

How to use the Optoma Presenter
Optoma Presenter application allows remote desktop from a host 
PC to be displayed on the network display through Ethernet, USB, 
or Wireless transports. It can adapt to different network settings 
(DHCP, fixed IP, and direct link by USB/Ethernet cable).
This software can be downloaded from web page.
Before using this function, a USB cable is needed to connect the 
Projector and PC Host directly. When the connection is OK, the 
PC will show a USB device disk. 
Select “Optoma Presenter”, and then run “autorun.exe” to sta\
rt 
USB Display. 
. Press the Autorun icon in the right-down region to pause or play 
the USB display.
  -->  
2. After installation in PC, double click the program of Optoma Pre-
senter to enter main window.
: Connect and search network display.
: Stop/Start displaying desktop contents to connected net-
work display.
: Select display region.
: Configure Optoma Presenter.
: Manage all connected network displays.
: Disconnect all connections.





