Optoma Projector Tw865 Nlw User Manual

							
English2

User Controls

Control Panel & Remote Control
Control Panel
Using the Control Panel
OffTurn off the projector.
Power OnTurn on the projector.
ShutterOpen/close the built-in shutter.
SourcePress “SOURCE” to select an input 
signal.
ZoomAdjust lens zoom function.
FocusAdjust lens focus function.
ShiftAdjust Lens shift up/down/left/right.
VGA Press “VGA ” to choose source 
from VGA-IN connector.
VGA 2Press “VGA 2” to choose source 
from VGA2-IN connector.
MenuPress “Menu” to launch the on-
screen display (OSD) menu. To exit 
OSD, Press “Menu” again. 
						

							
English22

User Controls

Using the Control Panel
Re-SyncAutomatically synchronize the pro-
jector to the input source.
DVI-DPress “DVI-D” to choose source 
from DVI-D connector.
HDMIPress “HDMI” to choose source 
from HDMI connector.
Four Directional Select 
Keys
Use to ▲▼◄► select items or 
make adjustments to your selection.
EnterConfirm your item selection.
YPbPrPress “YPbPr” to choose compo-
nent video source.
BNCPress “BNC” to choose source from 
BNC (YPbPr/RGBHV) connector.
AV MuteMomentarily turns off/on the audio 
and video.
Info. (Information)Display the projector’s information.
S-VideoPress “S-Video” to choose source 
from S-Video connector.
VideoPress “Video” to choose composite 
video source. 
						

							
English23

User Controls

Using the Remote Control
Power OnTurn on the projector.
StandbyTurn off the projector.
Function Adjust Function  settings.
Function 2Adjust Function 2 settings.
Lens FocusAdjust lens focus function.
Lens ZoomAdjust lens zoom function.
Lens ShiftAdjust Lens shift up/down/left/right.
LED IndicatorIndicate Lens function status. LED 
indicator light that is in use.
SourcePress “SOURCE” to select an input 
signal.
Volume +/-Adjust to increase / decrease the 
volume.
ShutterOpen/close the built-in shutter.
KeystoneAdjust image distortion caused by 
tilting the projector.
Display ModeSelect the display mode from 
Presentation, Bright, Movie, sRGB, 
Blackboard, Classroom, DICOM 
SIM., 3D, ISF Day, ISF Night and 
User.
HDMIPress “HDMI” to choose source 
from HDMI connector.
DVIPress “DVI” to choose source from 
DVI-D connector.
Re-SyncAutomatically synchronize the pro-
jector to the input source.
Info. (Information)Display the projector’s information.
Numbered KeypadPress “~9” to input a password in 
the “Security” settings.
YPbPrPress “YPbPr” to choose compo-
nent video source.
Remote Control 
						

							
English24

User Controls

Using the Remote Control
AllRestore the default remote code.
VideoPress “Video” to choose composite 
video source.
IDSet the remote code.
BNCPress “BNC” to choose source from 
BNC (YPbPr/RGBHV) connector.
VGA 2Press “VGA 2” to choose source 
from VGA2-IN connector.
VGA Press “VGA ” to choose source 
from VGA-IN connector.
S-VideoPress “S-Video” to choose source 
from S-Video connector.
FormatSelect the desired aspect ratio.
MenuPress “Menu” to launch the on-
screen display (OSD) menu. To exit 
OSD, Press “Menu” again.
Four Directional Select 
Keys
Use to ▲▼◄► select items or 
make adjustments to your selection.
EnterConfirm your item selection.
Test PatternDisplay a test pattern.
AV MuteMomentarily turns off/on the audio 
and video. 
						

							
English25

User Controls

Remote Code Setting
Default code setting (common code): 00
The default code of remote control can be set by pressing "All" key 
continuously until LED indicator quickly blinking 3 times. (around 3 
seconds) Regardless of projector’s remote code, the remote control 
can operate each projector simultaneously if the remote code of 
remote control is set at default code.
Remote code setting: 01 ~ 99
The remote code of the remote control can be changed by pressing 
the “ID” continuously until LED indicator slowly blinking (around\
 3 
seconds,), and then pressing double digit numbered buttons (0~99) 
as the code number. The LED indicator will blink three times quickly 
as setting success.  If  the setting process don’t be completed in 0 
seconds, the process will be time out and keep original remote code.
Sleep mode
Remote control will enter sleep mode as below conditions:
No key press
Press multi keys simultaneously
Press one key over 60 seconds continuously
Backlight
Backlight will turn on as pressing any key
If backlight turn on 0 seconds continuously and no operated, the 
backlight will turn off gradually in 5 seconds.




 
						

							
English26

User Controls

Cable Connection for Wired Control
As remote control connects with projector by cable
IR emitter signal will be cut off.
No extra setting need.


Projector (II)
Projector (I)
Audio Cable Jack/Jack *
Remote Control Adapter (3.5mm to 2.5mm Mini Jack) *
.
2.
1
1
2
NOTE
(*) Optional ac-cessoryUse cable length of 20m or less, if the length of cable exceeds 20m, the remote control may not work normally.

 
						

							
English27

User Controls

The Projector has multilingual On-screen Display menus that 
allow you to make image adjustments and change a variety of 
settings. The projector will automatically detect the source.
How to operate
.  To open the OSD menu, press “Menu” on the Remote Control or 
Control Panel.
2  When OSD is displayed, use ▲▼ keys to select any item in the 
main menu. While making a selection on a particular page, press 
► or “Enter” key to enter sub menu.
3.  Use ▲▼ keys to select the desired item in the sub menu and then 
press ► or “Enter” key to view further settings. Adjust the settings 
by ◄► key.
4.  Select the next item to be adjusted in the sub menu and adjust as 
described above.
5.  Press “Enter” to confi rm, and the screen will return to the main 
menu.
6.  To exit, press “Menu” again. The OSD menu will close and the 
projector will automatically save the new settings.
On-screen Display Menus
Main Menu
Setting
Sub Menu 
						

							
English28

User Controls

Menu Tree
Main MenuSub MenuSettingsNOTE
Please note that the on-screen display (OSD) menus vary according to the signal type selected and the projector model you are using.(*) Optional func-tion


Display Mode
BrightnessContrastSharpnessColorTintAdvancedNoise ReductionBrilliantColor™GammaDynamicBlackTrueVividColor Temp.Color SpaceColor Space (HDMI)Color Settings
Input Source
ExitFormat (XGA)Format(WXGA)ZoomEdge MaskH Image ShiftV Image Shift* Geometry OffKeystone4-Corner/ Digital ShiftCurve
PC ModeV KeystonePIPScreen
PIP Location
PIP SizePIP SourceSwapExit3D3D Mode3D Sync. InvertExitLanguage
Projection
Screen TypeMenu Location
Lens FunctionFocusZoomLens shiftLens TypeLens calibrationBlending Pattern Off / Green / MagentaExitSecuritySecurity TimerChange PasswordSecurityExit
SETUP
Auto / RGB / YUVAuto / RGB (0-255) / RGB (16-235) / YUVRed Gain / Green Gain / Blue Gain / Red Bias / Green Bias / Blue Bias / Reset / YesVGA1 / VGA2 / HDMI / DVI / BNC / Component / S-Video / Video / Flash Drive / Network Display / USB Display
Film / Video / Graphics / StandardOff / On0~5Warm / Medium / Cold
Presentation / Bright / Movie / sRGB / Blackboard / Classroom / DICOM SIM. / ISF Day / ISF Night / 3D / User-50~50-50~501~15-50~50-50~500~100~10
Off / On
A01 / A02 / A03Yes / No
Month / Day / Hour / Exit
Lock / Unlock
English / Deutsch / Français / Italiano / Español / Português /\
 Svenska / Nederlands / Norsk / Dansk / Polski / Suomi / Jmkkdbc / 
0 / Magyar / ýeština / 6
						

							
English29

User Controls

Main MenuSub MenuSettingsSignal (RGB)Frequency 0~100PhaseH. PositionV. PositionAutomaticExitSignal (Video)White LevelBlack LevelSaturationIREExitProjector IDAudio SettingsInternal SpeakerMuteVolumeAudio InputExitAdvancedLogoLogo CaptureClosed CaptioningExitNetwork Network StateDHCPIP AddressSubnet maskGatewayDNSApplyExit* Image Blending BlendingCropOverlapBright Adj.Gamma 1.8 / 2 / 2.2ExitSource Lock Off / OnHigh AltitudeInformation HideKeypad LockTest PatternBackground ColorLamp SettingsLamp HoursLamp ReminderBrightness ModeLamp ResetExitRemote SettingsFunction 1Function 2Top IR SensorFront IR SensorRemote CodeExit12V TriggerAdvancedDirect Power OnSignal Power OnAuto Power Off (min.)Sleep Timer (min.)Power Mode (Standby)BaudrateExitVGA OutInformationReset
SETUP
Yes / No
9600 / 19200 / 38400
Auto / VGA1 / VGA2
Off / On0~1800~995Active / Eco.
00~99
Off / OnOff / On
Brightness / PIP / ProjectionContrast / PIP Source / PIP Swap / ColorOff / OnOff / On
Off / OnBright / Eco. / ImageAIYes / No
Off / OnNone / Grid / WhiteBlue / Black / Red / Green / White
Off / OnOff / On
Off / OnOff / On
Overlap / Non Overlap / Exit
Yes / No
Off / On
CC1 / CC2 / Off
Month / Day / Hour / Exit
0~10Default / Audio 1 / Audio 2 / Audio 3
Optoma / Neutral / User
Off / OnOff / On
-50~50-50~500 / 7.5
-50~50Enable / Disable
-50~50
-50~50-50~50
OPTIONS
NOTE
(*) Optional func-tion 
						

							English30
User Controls
IMAGE
  Display Mode
There are many factory presets optimized for various types of 
images.
Presentation: Good color and brightness from PC input.
Bright: Maximum brightness from PC input.
Movie: For home theater.
sRGB: Standardised accurate color.
Blackboard: This mode should be selected to achieve optimum 
color settings when projecting onto a blackboard (green).
Classroom: This mode is recommended for projecting in a 
classroom.
DICOM SIM.: This display mode simulates the greyscale/gam-
ma performance of equipment used for “Digital Imaging and 
Communications in Medicine” (DICOM).
IMPORTANT:  This mode should NEVER be used for medical diagnosis, it is for 
education/training purposes only.
3D: Recommended setting for 3D mode enabled. Any further 
adjustments by the user in 3D will be saved in this mode for 
further use.
User: User’s settings.
  Brightness
Adjust the brightness of the image.
Press the ◄ to darken image.
Press the ► to lighten the image.











NOTE
3D mode only 
supports below 
3D sources.
Input source tim-
ing-120Hz frame 
sequential:
1.  1280x720 
120Hz
2.  1024x768  120Hz
3.  800x600  120Hz
