Optoma Projector Tw865 Nlw User Manual
Have a look at the manual Optoma Projector Tw865 Nlw User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1077 Optoma manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
English3 User Controls Contrast The contrast controls the degree of difference between the light- est and darkest parts of the picture. Press the ◄ to decrease the contrast. Press the ► to increase the contrast. Sharpness Adjust the sharpness of the image. Press the ◄ to decrease the sharpness. Press the ► to increase the sharpness. Color Adjust a video image from black and white to fully saturated color. Press the ◄ to decrease the color saturation in the image. Press the ► to increase the color saturation in the image. Tint Adjust the color balance of red and green. Press the ◄ to increase the amount of green in the image. Press the ► to increase the amount of red in the image. NOTE “Color” and “Tint” are only support-ed for composite and component sources.
English32 User Controls Noise Reduction The motion Adaptive Noise Reduction reduces the amount of vis- ible noise interlaced signals. The range is from “0” to “0”. (0: Off) BrilliantColor™ This adjustable item utilizes a new color-processing algorithm and system level enhancements to enable higher brightness while providing true, more vibrant colors in picture. The range is from “0” to “0”. If you prefer a stronger enhanced image, adjust toward the maximum setting. For a smoother, more natural image, adjust toward the minimum setting. Gamma This allows you to choose a gamma table that has been fine- tuned to bring out the best image quality for the input. Film: for home theater. Video: for video or TV source. Graphics: for image source. Standard: for standardized setting. DynamicBlack DynamicBlack enables the projector to automatically optimize the display of dark movie scenes enabling them to be shown in incredible detail. True Vivid This adjustable item utilizes a new color-processing algorithm and enhancements to enable the picture’s vividness to be significantly increased. Color Temp. If set to cold temperature, the image looks more blueish (cold image). If set to warm temperature, the image looks more reddish (warm image). IMAGE | Advanced NOTE “DynamicBlack” is only available when “3D Mode” is “Off.”
English33 User Controls Color Space Select an appropriate color matrix type from AUTO, RGB, RGB(0- 255), RGB(6-235) or YUV. Color Settings Press into the next menu and then use ▲ or ▼ to select item. Red Gain/Green Gain/Blue Gain/Red Bias/Green Bias/Blue Bias: Use ◄ or ► to Red, Green, or Blue for brightness (Gain) and contrast (Bias). Reset: Choose “Yes” to return the factory default settings for color adjustments. Input Source Use this option to enable / disable input sources. Press to enter the sub menu and select which sources you require. Press “Enter” to fi nalize the selection. The projector will not search for inputs that are not selected. NOTE “RGB(0-255)” and “RGB(6-235)” are only supported for HDMI source.
English34 User Controls Format Use this function to choose your desired aspect ratio. XGA 4:3: This format is for 4x3 input sources. 6:9-I: This format is for 6x9 input sources, like HDTV and DVD enhanced for Wide screen TV. (576i/p) 6:9-II: This format is for 6x9 input sources, like HDTV and DVD enhanced for Wide screen TV. (480i/p) Native: This format displays the original image without any scaling. AUTO: Automatically selects the appropriate display format. When input is 4:3, the image is displayed as 4:3. When input is 6:9 above, the image is displayed as 6:9-I. Source480i/p576i/p080i/p720pPC 4:3024 x 768 center 6:9-I024 x 576 center 6:9-II854 x 480 center NativeNo resize image, : mapping and centered.This format shows the original image without scaling. Auto With PC input (VGA/ HDMI), the Aspect Ratio displayed as default will depend on the source input.When input is 4:3, the image is displayed as 4:3When input is 6:9 above, the image is displayed as 6:9-I. DISPLAY
English35 User Controls WXGA 4:3: This format is for 4x3 input sources. 6:9: This format is for 6x9 input sources, like HDTV and DVD enhanced for Wide screen TV. 6:0: This format is for 6x0 input sources, like wide screen laptop. LBX: This format is for non-6x9, letterbox source and for us- ers who use external 6x9 lens to display 2.35: aspect ratio using full resolution. Native: This format displays the original image without any scaling. AUTO: Automatically selects the appropriate display format. 6:0 Screen480i/p576i/p080i/p720pPC 4:3066 x 800 center 6:0280 x 800 center LBX280 x 960 center, then get the central 280 x 800 image to display. Native: mapping centered: mapping display 280 x 800 280 x 720 centered: mapping centered Auto If this format is select, Screen type will auto become 6:0. (280 x 800)If source is 4:3, auto resize to 066 x 800.If source is 6:9, auto resize to 280 x 720.If source is 5:9, auto resize to 280 x 768.If source is 6:0, auto resize to 280 x 800. 6:9 Screen480i/p576i/p080i/p720pPC 4:3960 x 720 center 6:9280 x 720 center LBX280 x 960 center, then get the central 280 x 720 image to display. Native: mapping centered: mapping display 280 x 720 280 x 720 centered: mapping centered Auto If this format is select, Screen type will auto become 6:9. (280 x 720)If source is 4:3, auto resize to 960 x 720.If source is 6:9, auto resize to 280 x 720.If source is 5:9, auto resize to 200 x 720 area to display.If source is 6:0, auto resize to 52 x 720 area to display.
English36 User Controls NOTE Each I/O has dif-ferent settings of “Edge Mask”. “Edge Mask” and “Zoom” can’t work at same time. Zoom Press the ◄ to reduce the size of an image. Press the ► to magnify an image on the projection screen. Edge Mask Edge mask function removes the noise in a video image. Edge mask the image to remove video encoding noise on the edge of video source. H Image Shift Shift the projected image position horizontally. V Image Shift Shift the projected image position vertically. V Keystone Press the ◄ or ► to adjust image distortion vertically and make a squarer image.
English37 User Controls DISPLAY | Geometry * Off Choose the “Off” to disable the geometry function. Keystone This allows you to correct the keystone distortion. Horizontal: Press the ◄ or ► to adjust the keystone horizon- tally and make a squarer image. Vertical: Press the ◄ or ► to adjust the keystone vertically and make a squarer image. ResolutionDegrees of keystone CorrectionHorizontalVerticalXGA+/- 40+/- 40WXGA+/- 40+/- 40 Pincushion/Barrel: Press the ◄ or ► to adjust the pincush- ion/barrel distortion. +/- 20% pincushion and barrel distortion correction. Rotation: Press the ◄ or ► to adjust the angle of image. Rota- tion angles can reach to +/- 90 degree. NOTE (*) Optional func-tion
English38 User Controls 4-Corner This allows you to correct the trapezoidal distortion. 4 Corner position adjustments: Top Left, Bottom Left, Top Right, Bottom Right and All. Maximum is 5%. Press the ◄ or ► to adjust x/y offset of each corner image. Curve This allows you to adjust the curve of point ~9. The screen is separated into 4 (2x2) grids and you can adjust every point of grids. PC Mode Enable RJ45 control with PC software that allows user to control geometry.
English39 User Controls DISPLAY | PIP Screen Single: Projection single screen. PIP Window: Main Screen is large screen; PIP Screen is small and displays in the corner of the main screen. Split Screen: Main Screen and PIP Screen are equal sizes and side by side. PIP Location Choose the PIP screen position on the display screen. PIP Size Choose the PIP size from /6, /25 or /36 on the display screen. PIP Source Choose the PIP source to switch PIP screen source. Swap Press to swap main screen and PIP screen. Some source/signal combinations may not be compatible with PIP function. Please refer to the table below: PIP SourceMain SourceDVI-DHDMI (v.3)BNCVGA2VGAS-VideoCVBSComponentDVI-DXXXXVVVVHDMI (v.3)XXXXVVVVBNCXXXXVVVVVGA2XXXXVVVVVGAVVVVXXXXS-VideoVVVVXXXXCVBSVVVVXXXXComponentVVVVXXXXV: compatible X: not compatible
English40 User Controls DISPLAY | 3D 3D Mode Off: Select “Off” to turn 3D settings off for 3D images. DLP Link: Select “DLP Link” to use optimized settings for DLP Link 3D images. VESA 3D: Select “VESA 3D” to use optimized setting for VESA 3D images. 3D Sync. Invert Press the “On” to invert left and right frame contents. Press the “Off” for default frame contents. NOTE “3D Sync Invert” is only available when “3D Mode” is enabled.Compatible 3D source, 3D con-tent and active shutter glasses are required for 3D viewing.