Optoma Projector Movietime Dv11 User Manual

DVD Projector  *  21
English

INSTALLATION

Adjusting the Projector’s Zoom/Focus
Turn the Zoom Lever to zoom in or zoom out. To focus the im-
age, turn the focus ring until you see a clear image. The projec-
tor will focus at distances from 4.92 to 32.80 feet (1.5 to 10.0 
meters).
Adjusting Projection Image Size
LH'
H(800X600)
A
B(800X600)
W0(800X600)
D(800X600)
H0(800X600)
H1(800X480)
Side ViewFront View
Zoom Lever
Focus Ring
Throw Ratio (TR)=1.36 as Wide mode
A=4.73°B (800x600)=32.375°W0...

22  *  DVD Projector
English

INSTALLATION

Adjusting the Aspect Ratio of the Image
Depending on the type of video source you are viewing, the 
picture may or may not always look correct or fit on the screen:
4:3 format
16:9-I format
16:9-II format 

DVD Projector  *  23
English

INSTALLATION

Adjusting the Sloping Image
If the projector is tilted up or down, the sides of the image on 
the screen might slope in or out, even though the top and bot-
tom are level. Using the [Keystone +/-] button to adjust the 
image.
Keystone +
Keystone - 

24  *  DVD Projector
English

USER CONTROLS

Using the Remote Control
PowerPress [Power] to turns on the projector’s lamp, 
refer to the “Powering On/Off the Projector” sec-
tion on page 16~19 for more details.
4:3Scale the image at a 4:3 aspect ratio.
16:9-IScale the image at a 16:9 aspect ratio.
16:9-IIScale to 854x480, then center 800x480 image to 
display.
NativeThe input source will be displayed without scal-
ing.
DVDChoose DVD source.
D-SUBChoose Analog RGB/Component sources from...

DVD Projector  *  25
English

USER CONTROLS

DisplayDisplay DVD’s states (title; chapter; time; infor-
mation).
SubtitleSelect the desired your subtitle language.
AudioSelect the desired audio language or sound mode.
Numerical 
Buttons
Selects track numbers for playback.
A-B RepeatRepeats playback of the selected section.
Angle ButtonChoose the camera angle to see the sequence be-
ing played back from a different angle.
When a DVD contains multiple angles of a par-
ticular scene, you can use the ANGLE...

26  *  DVD Projector
English

USER CONTROLS

Using the Projector Panel
 Stand By
Power LED
Press [Stand By] to turns on the projector’s lamp, 
refer to the “Powering On/Off the Projector” sec-
tion on page 16~19 for more details.
Indicate the projector’s status.
 Lamp LEDIndicate the projector’s lamp status.
 Temp LEDIndicate the projector’s temperature status.
/ 
Volume +/-
Adjusts to increase/decrease the volume.
 SourcePress to choose RGB, S-Video, Composite, Com-
ponent, and HDTV sources....

DVD Projector  *  27
English

USER CONTROLS

Using the DVD Panel
 DVD LEDIndicate the DVD’s status.
 Eject ButtonStops playing and eject the disc.
 PREV But-
ton
Press to skip to the previous title/chapter.
 NEXT But-
ton
Press to skip to the next title/chapter.
 /  Play/
Pause Button
Press to play/pause playback.
 Stop ButtonPress to stop playback. 
/ 
Volume +/-
Adjusts to increase/decrease the volume. 

28  *  DVD Projector
English

USER CONTROLS

How to Operate Projector Menu
1.   To open the OSD menu, press [Projector Menu] on the Remote Con-
trol or press [Menu] on Control Panel. 
2.   When OSD is displayed, use   keys to select any item in the 
main menu. While making a selection on a particular page, press  
 key to enter sub menu.
3.   Use   keys to select the desired item and adjust the settings by 
  key. 
4.   Select the next item to be adjusted in the sub menu and adjust as 
described above....

DVD Projector  *  29
English

USER CONTROLS

Menu Tree for Projector 

30  *  DVD Projector
English

USER CONTROLS

Language
 Language
Display a multilingual menu. Use  and  to select your preferred 
language. 
Press [Enter] to finalize the selection.