Optoma Projector Movietime Dv11 User Manual

DVD Projector  *  11
English

INTRODUCTION

Remote Control
1.   Power On/Off
2.   S-Video Source
3.   D-Sub Source
4.   DVD Source
5.   Stop Button
6.   Play Button
7.   REW Button
8.   PREV Button
9.   Audio
10. Enter
11. Keystone +/-
12. 4:3
13. 16:9-I
14. Numerical Buttons
15. A-B Repeat
16. Slow Button
17. GOTO Button
18. Repeat Button
19. Return Button
20. Video Source
21. Display
22. Pause Button 
23. FWD Button
24. NEXT Button
25. DVD Menu
26. Four Directional Select 
Keys
27 . Projector Menu
28....

12  *  DVD Projector
English

INSTALLATION

1.   Power cord 
2.   VGA cable 
Setting up the Projector
Connecting the Computer/Notebook
12 

DVD Projector  *  13
English

INSTALLATION

1
1.   Power cord
2.   Video cable 
3.   S-Video Cable
4.   D-Sub to RCA 
Adapter
5.   RCA Compo-
nent Cable for 
YPbPr
6.   SCART RGB/S-
video Adapter
Connecting the Video
6
The user can install the connection port according to their environment of audio and video equipments or demand.
NoteNote
4
32
5 

14  *  DVD Projector
English

INSTALLATION

Connecting the Audio Input
1.   Power cord
2.   Audio cable 
(L/R)
Connecting the Audio Output-
(External Subwoofer/Stereo System)
1.   Power cord
2.   Audio cable
2
1
1
2 

DVD Projector  *  15
English

INSTALLATION

Connecting the Audio Output-
(2.1 Channel/5.1 Channel)
1.   Power cord
2.   Digital audio 
cable
5.1 Channel2.1 Channel
Coaxial Digital Audio 
Input Jack
1
2 

16  *  DVD Projector
English

INSTALLATION

Powering On the Projector
1.   Remove the lens cap. 
2.   Ensure that the power cord and signal cable are securely 
connected. The Power LED will flash blue.
3.   Turn on the lamp by pressing [Stand By] button on the con-
trol panel. And the Power LED will turn green. 
The first time you use the projector, you can select your 
preferred language from quick menu after the startup screen 
display.
4.   Turn on your source (computer, notebook, video player,...

DVD Projector  *  17
English

INSTALLATION

Turn On the DVD Player
1.   Remove the lens cap.
2.   Ensure that the power cord and signal cable are securely 
connected. The DVD LED will flash green.
3.   Turn on the lamp by pressing [Stand By] button on the con-
trol panel. And the DVD LED will turn green. 
If the DVD player load the disc, you will see a message 
“Read disc” displayed on the projector’s screen. If the DVD 
player does not load the disc, the start-up screen will display 
on the projector’s...

18  *  DVD Projector
English

INSTALLATION

DVD compatibility type
Type of discDiameterRecorder
DVD12cmDVD data format: com-
pressed digital audio + 
compressed digital video
VCD12cmMPEG compressed digital 
audio + compressed digi-
tal video
Audio CD12cmCD-DA: digital audio
MP3/JPEG12cmCompressed digital audio
WMA12cmCompressed digital audio
JPEG12cmDigital Photo
Powering Off the Projector
1.   Press the [Power] or [Stand By] button to turn off the pro-
jector lamp, you will see a message “Power off the...

DVD Projector  *  19
English

INSTALLATION

4.   The projector cannot be turned on immediately following a 
power off procedure.
Warning Indicator
▀■  When the “LAMP” indicator lights solid orange, the projec-
tor will automatically shut itself down. Please contact your 
local reseller or service center.
▀■  When the “TEMP” indicator lights solid orange, it indicates 
the projector has been overheated. The projector will auto-
matically shut itself down.
Under normal conditions, the projector can be...

20  *  DVD Projector
English

INSTALLATION

Adjusting the Projector’s Height
The projector is equipped with three adjustable feet to modify 
the height of the projector.
To raise or lower the image:
1.   Locate the elevator foot. Press the elevator button  to 
extend the foot so it may be adjusted.
2.   While holding down the elevator button, adjust the foot 
to the desired height , then release the button to lock the 
elevator foot into position.
3.   Use  to fine-tune tilt-adjustment.
4.   Lower the...