Optoma Projector Movietime Dv11 User Manual

							
DVD Projector  *  21
English

INSTALLATION

Adjusting the Projector’s Zoom/Focus
Turn the Zoom Lever to zoom in or zoom out. To focus the im-
age, turn the focus ring until you see a clear image. The projec-
tor will focus at distances from 4.92 to 32.80 feet (1.5 to 10.0 
meters).
Adjusting Projection Image Size
LH'
H(800X600)
A
B(800X600)
W0(800X600)
D(800X600)
H0(800X600)
H1(800X480)
Side ViewFront View
Zoom Lever
Focus Ring
Throw Ratio (TR)=1.36 as Wide mode
A=4.73°B (800x600)=32.375°W0 (800x600)=L/TR
H'=L X tan(A)H (800x600)=W0 (800x600) X 0.75
Display FormatABL (cm)W (cm)H (cm)H’(cm)D(cm)
16:9 (800x480)7.3128.44236.0173.697.630.20199.14:3 (800x600)4.7332.38236.0173.6130.219.53217.0Projection Distance (M)1.52.02.53.03.54.0
Screen Size 16:9 (inch)Max49.8266.4383.0499.64116.25132.56Min45.2960.3975.4990.58105.68120.78
Screen Size 4:3 (inch)Max54.2872.3790.46108.56126.65144.74Min49.3465.7982.2498.69115.14131.58Projection Distance (M)5.06.07.08.09.010.0
Screen Size 16:9 (inch)Max166.07199.28232.50265.71298.93332.14Min150.97181.17211.36241.56271.75301.95
Screen Size 4:3 (inch)Max180.93217.11253.30289.49325.67361.86Min164.48197.38230.27263.17296.07328.86   
						

							
22  *  DVD Projector
English

INSTALLATION

Adjusting the Aspect Ratio of the Image
Depending on the type of video source you are viewing, the 
picture may or may not always look correct or fit on the screen:
4:3 format
16:9-I format
16:9-II format 
						

							
DVD Projector  *  23
English

INSTALLATION

Adjusting the Sloping Image
If the projector is tilted up or down, the sides of the image on 
the screen might slope in or out, even though the top and bot-
tom are level. Using the [Keystone +/-] button to adjust the 
image.
Keystone +
Keystone - 
						

							
24  *  DVD Projector
English

USER CONTROLS

Using the Remote Control
PowerPress [Power] to turns on the projector’s lamp, 
refer to the “Powering On/Off the Projector” sec-
tion on page 16~19 for more details.
4:3Scale the image at a 4:3 aspect ratio.
16:9-IScale the image at a 16:9 aspect ratio.
16:9-IIScale to 854x480, then center 800x480 image to 
display.
NativeThe input source will be displayed without scal-
ing.
DVDChoose DVD source.
D-SUBChoose Analog RGB/Component sources from 
VGA/Component/SCART connector.
S-VIDEOChoose S-Video source from S-VIDEO connector.
VIDEOChoose composite video source from VIDEO 
connector.
 Enter Confirm your item selection.
Projector 
Menu
Display or exits the on-screen display menus for 
projector.
Four Direc-
tional Select 
Keys
Use     to select items or make adjust-
ments to your selection.
Keystone +/-Adjusts image distortion caused by tilting the 
projector.
Volume +/-Adjusts to increase/decrease the volume.
DVD MenuSome DVDs allow you to select the disc con-
tents using the menu. When you play back these 
DVDs, you can select the subtitle language and 
sound-track language, etc. using the menu.
Control Panel & Remote Control
There are two ways for you to control the functions: with con-
trol panel and remote control. 
						

							
DVD Projector  *  25
English

USER CONTROLS

DisplayDisplay DVD’s states (title; chapter; time; infor-
mation).
SubtitleSelect the desired your subtitle language.
AudioSelect the desired audio language or sound mode.
Numerical 
Buttons
Selects track numbers for playback.
A-B RepeatRepeats playback of the selected section.
Angle ButtonChoose the camera angle to see the sequence be-
ing played back from a different angle.
When a DVD contains multiple angles of a par-
ticular scene, you can use the ANGLE function.
 REW ButtonPress to search backward in x2/x4/x8/x20 speed.
 PREV But-
ton
Press to skip to the previous title/chapter.
 NEXT But-
ton
Press to skip to the next title/chapter.
 FWD But-
ton
Press to search forward in x2/x4/x8/x20 speed.
 Play ButtonPress to begin playback.
 Stop ButtonPress to stop playback. 
 Pause But-
ton
Press to pause playback. Press the  [Play] but-
ton to resume normal playback.
Slow Press to activate slow forward or slow rewind.
Goto Press to select the desired disc starting time, 
chapter or title.
RepeatRepeats playback of the current disc, title, chapter 
or track.
ReturnReturns to the previous operation. 
						

							
26  *  DVD Projector
English

USER CONTROLS

Using the Projector Panel
 Stand By
Power LED
Press [Stand By] to turns on the projector’s lamp, 
refer to the “Powering On/Off the Projector” sec-
tion on page 16~19 for more details.
Indicate the projector’s status.
 Lamp LEDIndicate the projector’s lamp status.
 Temp LEDIndicate the projector’s temperature status.
/ 
Volume +/-
Adjusts to increase/decrease the volume.
 SourcePress to choose RGB, S-Video, Composite, Com-
ponent, and HDTV sources.
ResyncAutomatically synchronizes the projector to the 
input source.
 EnterConfirm your item selection.
 MenuDisplay or exit the on-screen display menus for 
projector.
Four Direc-
tional Select 
Keys
Use     to select items or make adjust-
ments to your selection.
The Resync function 
can not be used when 
the DVD player is 
operational. 
NoteNote 
						

							
DVD Projector  *  27
English

USER CONTROLS

Using the DVD Panel
 DVD LEDIndicate the DVD’s status.
 Eject ButtonStops playing and eject the disc.
 PREV But-
ton
Press to skip to the previous title/chapter.
 NEXT But-
ton
Press to skip to the next title/chapter.
 /  Play/
Pause Button
Press to play/pause playback.
 Stop ButtonPress to stop playback. 
/ 
Volume +/-
Adjusts to increase/decrease the volume. 
						

							
28  *  DVD Projector
English

USER CONTROLS

How to Operate Projector Menu
1.   To open the OSD menu, press [Projector Menu] on the Remote Con-
trol or press [Menu] on Control Panel. 
2.   When OSD is displayed, use   keys to select any item in the 
main menu. While making a selection on a particular page, press  
 key to enter sub menu.
3.   Use   keys to select the desired item and adjust the settings by 
  key. 
4.   Select the next item to be adjusted in the sub menu and adjust as 
described above.
5.   Press [Projector Menu]/[Menu] to confirm, and the screen will 
return to the main menu.
6.   To exit, press [Projector Menu]/[Menu] again. If you don’t press 
any key, the projector will automatically disappear after 30 seconds. 
The OSD menu will close and the projector will automatically save 
the new settings.
On-screen Display Menus
The Projector has multilingual On-Screen Display menus that 
allow you to make image adjustments and change a variety of 
settings. The projector will automatically detect the source.
Main menuSub-menuItem 
						

							
DVD Projector  *  29
English

USER CONTROLS

Menu Tree for Projector 
						

							
30  *  DVD Projector
English

USER CONTROLS

Language
 Language
Display a multilingual menu. Use  and  to select your preferred 
language. 
Press [Enter] to finalize the selection.