Optoma Hd82 Projector User Manual

English


User Controls

The Projector has multilingual On-screen Display menus 
that allow you to make image adjustments and change a 
variety of settings. The projector will automatically detect 
the source. 
How to operate 
1.   To open the OSD menu, press “Menu” on the Remote Control or 
Control Panel.
2    When OSD is displayed, use      keys to select any item in the 
main menu.  While making a selection on a particular page, press 
 or “Enter” key to enter sub menu.
3.   Use      keys...



User Controls

Menu Tree
%ULJKW0RGH
2Q2II
1R

English


User Controls

Image
 Mode
There are many factory presets optimized for various types of im-
ages.
 Cinema: For home theater.
 Bright: Maximum brightness input.
 Photo: Optimized for displaying photographic images.
 Reference: This mode is intended to reproduce, as close as 
possible, the image the way the movie director intended. Color, 
color temperature, brightness, contrast and gamma settings are 
all configured to standard reference levels.
 User: User’s settings....



User Controls

 Color
Adjust a video image from black and white to fully saturated color .
 Press the  to decrease the color saturation in the image.
 Press the  to increase the color saturation in the image. 
  Tint 
Adjust the color balance of red and green.
 Press the  to increase the amount of green in the image.
 Press the  to increase the amount of red in the image.
 Sharpness 
Adjust the sharpness of the image.
 Press the  to decrease the sharpness.
 Press the  to increase the...

English


User Controls

Image | Advanced
 Noise Reduction
The motion Adaptive Noise Reduction reduces the amount of vis-
ible noise interlaced signals. The range is from “0” to “10”. (0:Off)
 Gamma
This allows you to set up gamma curve type. After the initial setup 
and fine tuning is completed, utilize the Gamma Adjustment steps 
to optimize your image output.
 Film: for home theater.
 Video: for video or TV source.
 Graphics: for image source.
 Standard: for standardized setting.
 B/W...



User Controls

 PureEngine
The PureEngine is a collection of advanced image processing 
technologies that enhances the quality of the displayed image.
 DynamicBlack
DynamicBlack enables the projector to automatically optimize the 
display of dark movie scenes enabling them to be shown in incred-
ible detail.
 RGB Gain/Bias
Press  into the next menu as below and then use  or  to se-
lect item. Use  or  to select Red, Green, or Blue for brightness 
(Gain) and contrast (Bias).      

English


User Controls

Image | Advanced 
| PureEngine
 PureDetail
PureDetail is an edge enhancement tool that enables the edges in 
the projected image is be enhanced thus providing more perceived 
detail.
 PureColor
This adjustable item utilizes a new color-processing algorithm and 
enhancements to enable the picture’s vividness to be significantly 
increased. The range is from “0” to “5”.
 PureMotion
PureMotion uses sophisticated algorithms to ensure that the natu-
ral motion in the image...



User Controls

 Format
Use this function to choose your desired aspect ratio.
 4:3: This format is for 4x3 input sources.
 16:9: This format is for 16x9 input sources, like HDTV and DVD 
enhanced for Widescreen TV.
 Native: This format displays the original image without any scal-
ing.
Display
Input Signal
Display area
Picture area
Display on Screen      

English


User Controls

 LBX: This format is for non-16x9, letterbox source and for users 
who use external anamorphic lens to display 2.35:1 aspect ratio 
using full resolution. 
Detail informations about LBX mode :
1.  Some Letter-Box DVDs are not enhanced for 16x9 TVs. In 
this situation, the image will not look right when displayed in 
16:9 mode. 
In this situation, please try to using the 4:3 mode to view the 
DVD.
If the content is not 4:3, there will be black bars around the 
image in...

0

User Controls

“SuperWide“ is Off“ as default.
How to use “Super-
Wide”
1.  Obtain a 2.0:1 aspect 
ratio screen
2.   Switch SuperWide 
ON
3.    Align the projector 
image correctly on the screen
4.   Enjoy movies without 
black bars
NoteNote
 SuperWide
SuperWide is a feature that uses a special 2.0:1 aspect ratio 
screen enabling both 16:9 and 2.35:1 aspect ratio movies to be 
shown without black bars at the top and bottom of the screen
 Off: Your desired aspect ratio can be selected - 4:3,...